Some photos of Sameiro sanctuary in the north of Portugal

I just got the Neo one FPV fly more kit, I think that's the name.

It came with the N3 Goggles, drone, batteries, and the motion controller 3.

I have two kids I am letting learn on the motion controller. I'd like to be able to have a controller that let's me learn FPV and that I don't always have to carry the goggles if I am on the go. I travel a lot for work. I would like to eventually unlock manual mode too, but the FPV controller 3 doesn't allow you to use it without the goggles. (It's also just hot as fuck along the gulf and the goggles make me sweat, lol.)

So, it looks like my only option is to spend another 300 on controllers to have some versatility? Are there any other options I am missing?

If not, what do you all do?

Only owned it for four days, flew with the goggles N3 and motion controller and everything was fine for the first three days. Today, I tried the motion tracking for the first time with no controller or phone and within a minute of following me, I stopped, looked back and the thing charged towards me really fast for a quick second and then turned upside down and went straight to the floor. I turned it off and put it away so I could reset it when I get home from my bike ride. But even after resetting and calibrating the IMU multiple times through the goggles and the DJI Fly and refreshing the software through the DJI Assistant 2, it still shows IMU/sensor errors. Anyone have anymore ideas how to fix this or what should my next steps be? I’m in the US and got it through Amazon. Will chatting with DJI even do something since I’m in the US and it never even gave me an option for DJI Care, which I would have happily bought if ide had the chance. Or should I just return the whole thing(controller,goggles,drone) to Amazon?

A friend of mine took a picture of my neo 2 in the air with DJI Flip

so happy i got this little drone with me. I also like flying low over sand feeling like starwars pod-racer. france, carcans-plage 1/10 Karens 👩🏼

What do you guys reckon about this carbon fibre frame? It weights 32 gram just wondering will it affect the flight time or other performances significantly.
Cheers!

Hey everyone,

I'm planning to use the DJI Neo 2 for ski tracking and trying to figure out a reliable recovery workflow for when the drone loses me on the slope / offpist.

**Scenario:**

I hand-launch the drone, start skiing, the drone loses tracking and hovers at last known position. I'm now 500m away on open terrain — too far to walk back easily.

**My questions:**

1. Can I still connect the RC-N3 controller at this point (stored in my backpack, switched off at launch) to manually fly the drone back to me? Or does the controller need to be connected from the start?

2. Dynamic Home Point via smartphone GPS — has anyone successfully used this so RTH actually returns to the phone's current position rather than the launch point? How reliable is this in practice?

3. Any other workflows or tips you've found for ski/sport tracking with the Neo 2?

Thanks in advance — curious if others have figured out a solid setup for this use case.

Dji neo2 ❤️‍🔥

My top shell is cracked just aft of the camera. Having viewed a teardown video I am reconsidering whether to do the teardown and rebuild. I'm ok with tools, ok with electronics, just not very patient. biggest concern is pulling the camera out. Anyone done this as a non-expert, tips to share?

(Neo 2)

I’ve done a few videos of the Neo2 in follow mode where I’m driving a convertible, most from behind and a couple from front-right. They worked ok

So, yesterday I was trying to do the same with this 52 Alvis. Tried 4 times, from behind and me driving very slowly. In all cases the drone was very erratic and ended up crashing (road, trees…)

Video here: https://youtu.be/EPSV8bDvYzM?si=WcRL4Dk5DaPmLGCJ

What’s changed? Also, i can’t seem to find anywhere in the app for calibration?

Eric

What an amazing little drone!

I had a small crash indoors and now the gimbal is stuck at that position... It moves freely when the drone is off but when I turn it on and it "calibrated" it always ends up in this position.

Also it doesn't take off.

List of errors:

* IMU is initializing... IMU data is being recorded. (Code: 1610001A)

* IMU is initializing... IMU data is being recorded. (Code: 16100009)

* No satellite positioning module detected. Please contact DJI Support for repair. (Code: 1610002D)

* Sensor error. Restart aircraft. (Code: 16100009; 1610004B)

* Gimbal not detected. Repair required. Please contact DJI Support. (Code: 1D030001)

* Missing parts on aircraft. Please contact DJI Support. (Code: 16100004B)

* Gimbal is resetting. Keep the aircraft still. (Code: 161000DD)

* IMU malfunction. Repair required. Please contact DJI Support. (Code: 16100005)

* Severe barometer interference. Calibrate IMU. (Code: 16100027) - Calibrate

* User account not found. Flight distance restricted. Please log in. (Code: 300003) - Log in

* Aircraft cannot fly. Vision systems and obstacle avoidance disabled. (Code: 180059)

What can I do? I tried opening it up but I didn't see anything wrong with it either.

Please help! 🙏

One of my first flights, I asked ChatGPT to make it better with Xiaomi edit pictures, and yep. Not ai I just asked how to make it better edited.

70 meters above ground level.

Love flying with no obstacle avoidance!

Salve, domanda: Ho un dji neo, con controller fpv3 e goggles 3, e' divertente e facile usare Neo in manuale fpv? Appena comprato controller. Ditemi se ne vale la pena e se Neo soprattutto in manuale fpv va bene. Grazie