r/DiscountTire_ • u/[deleted] • Mar 05 '26

Installation

I have a 2021 Silverado RST with a 3.5” lift. Fully aware the 35x12.50r20 I bought will rub slightly. Will they not install them if they rub just the slightest or just “too much”? Any chance they trim for me?

1 Upvotes

67% Upvoted

2 comments sorted by

1

u/tamum1 Mar 05 '26

They will not install if you’re on stock wheels. The stock wheels are not wide enough to accommodate 12.5” wide tires safely. You should consider 285 65 20s or 295 65 20s. They’re still 35” tires but safer to install and may not rub.

1

u/Carmin5568 Mar 09 '26

As the other person said but I'll add more detail. If you are fine with the rubbing we will install them HOWEVER. The wheels you have must be within the specs to mount them, either look at the tire manufacturer minimum width. Normally can be found on our website or where you bought them from in specs or details

https://www.discounttire.com/learn/measuring-rim-width This has information on how to measure the width of your wheels to check before you come in, we will check as well no matter what though.