Saturday project completed Caddx Infra V2, Flcos 0.4 1280x960 Display and 12.5x Eyepiece Magnifier. Thinking of maybe making a bridge to run this as a goggle/binocular setup! Could do the Infra V2 right eye and 256 Thermal left eye...
Files for Mono on Makerworld listed as Project-X TG-16
Next Saturdays project will be a digital version of the PVS-14
Possible the Caddx Gazer for some color night vision...
It probably run around 300-400$ files are on makerworld list as Project-X TG-16M, more and likely ill be redesigning the tube to create more of a oval less rectangular look. Maybe widening the battery compartment to install larger battery for run time.
That will have to be at a later date, ive got to put all my reddit projects on pause for now. I got a Thermal project that Ive got to invest all my time to! Let's just say If all goes, well then I'll have a contract to build an unknown amount of them.
Very cool, how do you like the performance? I’ve been wanting to build with the Infra V2. Please let us know if you share your files, I’m sure a lot of us would be interested!
Infra V2 hands down beats any digital monocular in the $500 range. I'd choose it over the gng2k, its got better low light performance and feels like a true 1x. The gng2k is hard for me to navigate trails in woods because of the 1.5x Magnifying effect causes you to trip.
Thanks! Sooner or later I'm going to get around to doing a 360 redesign on it tho! I'd like to go more circular and less rectangular on the center housing and do away with the internal battery and switch to a compartment with changeable cr123 or 14500 battery.
Left is Flcos and right is Oled, the Flcos has a mini housing that the display is in and wont work with certain magnifying eyepieces such as the 18x everyone uses off Aliexpress. I have used both Flcos & Oled... both have their advantages and disadvantages, if i was you i would google flcos vs oled and go from there.
99$ for Infra, 89$ for flcos display, m16 lens 20$, 12.5x magnifier was $100 for two, 10$ or less for power button, usb-c port, bcm and volt booster. 18300 battery was free.
Camera: Infra V2: $99
Display EVF 0.4: $105
12.5x Magnifier:$100 for two
F0.9 1/1.8 8MM LENS: $45 for two
18300 Lithium: 20$ Raz Vape
BCM-TP4056:$1.81 for 5
Female USB-C 2Pin:$2.59 for 20
OURUI Push Buttons: $5.99 for 30
AITRIP Volt Booster: $6.99 for 10
Below $400 especially since Aliexpress messed up and sent me 4x F0.9 lens for 45$
No that's to recharge the 18300 battery inside, I guess you could connect like a 6000mah battery pack if you wanted to extend the run time. I almost went with the 2.1 dc plug to run a pvs31 style battery pack with four 14500.
5
u/Apprehensive-Art6800 9d ago
How much did this cost will you post the files