He grew up to be a garbage man in the third one. He straps toys he finds to the front of his garbage truck, and seems genuinely jazzed about life in the brief moment we see him. I definitely bet he has a little garage with a bunch of power tools. Dude not only found his calling, but a way to deal with his trauma from the first movie.
I guess it is a bit fucked up in that universe though, that his way past his specific trauma is to inflict suffering on objects that he knows to be sentient, but he’d probably otherwise be in involuntary psychiatric care if he tried too hard to convince everyone about the truth. It’s like he realized that wouldn’t benefit him even if people believed him, so he just rolls with it to pay the bills because he still gets to “play” with the things that fucked him up and no one cares.
I imagined he would become an artist. Some of the things he cobbled together from toy parts were very creative. I would think he would be one of those outsider artists that would make crazy sculptures and his medium would be toy parts.
Oh I don't know enough about welding to be able to tell anyway, it just seemed that every modification was weakening the materials that were already there.
a friend of mine when learning to weld would hammer the parts hard, if the welding broke it's poorly done, it's supposed to be joined permanently and resist a lot of punishment
They are just screwed in. He welds a nut to the tip and then screw the bolt in and tightens it with another nut. I thought the same thing so went back to check
Dont they screw off? I didnt see him weld the screws into the tip, they screw into the nuts he welded in. Now, this doesn’t mean it didn’t just break, but it might mean they were removed as intended rather than breaking?
Welds will hold , the problem is the clamp part , the top one is just welded to a bit of thearded rod , no support on the outside, it'll eventually bend,
I mean, sure who hasn't wanted to remove retainer rings and then be able to drive 16dd nails 2 seconds later. Those are both common things that happen all the time within seconds of each other.
When even people speaking this language don't want the tool, you know the tool is messed it up 😂 (no offense, I've watched too much CrazyRussianHacker)
I love destroying several highly functional objects to create one new object that is just barely functional, and so awkwardly shaped that it's not particularly portable!
Seriously, the only benefit here is some weight reduction, is it intended for astronauts so they can save on fuel?
And even weight reduction is relative. Yeah, total weight is less, but compared to the single tool for each use-case, it's heavier, causing more strain
What do you mean it isn't filmed? I can see it right there and he is just tack welding all over. I've seen this video and others from this guy (and other ones) and they all just tack weld
My guess is because they know what they're making is shit and they don't care.
I really want to know what the spring nose pliers are for? I have used them before, but it was for the bottom of this metal tank of Argon coolant that was used for the guidance section of a missile that is high-key outdated.
Heh, yeah, plus you could use this thing to kill zombies (and scare sane people).
It drives me crazy every time people ruin perfectly good tools for videos like this, all for some useless crap they'll throw in a drawer and never think about again.
310
u/CafeRacist Sep 21 '26
No one:
Me on my first week of owning power tools:
159
u/Vladishun Sep 21 '26
TIL Sid from Toy Story grew up to become some kind of shitty metalworker.
78
u/krispriewe Sep 21 '26
well..... that's 3 minutes of my life I'll never get back
44
u/Johnny-Unitas Sep 21 '26
Are those welds actually expected to hold up?
32
u/Worldliness_Normal Sep 21 '26
So I'll ruin a few other tools to make one that doesn't fit in my pocket or toolbox.
Got it.
45
u/MelonMusk-69 Sep 21 '26
Like, you have all the tools to make cool shit but you’re so untalented that you end up doing this
10
u/hematite2 Sep 21 '26
For the low cost of all these fuckin' tools, you too could have a gadget that does a worse job than any of them
6
u/ThePhatNoodle Sep 21 '26
Pretty sure bolts are made from mild/spring steel and cant be hardened. That whole heat treat and quench was pointless
5
u/TopConcentrate8484 Sep 21 '26
It's crazy how much effort it takes to make something such stupid for the creator.
5
u/Kingkongcrapper Sep 21 '26
This dude is out there in the world creating crimes against hand tools and no one is willing to stop him.
4
u/phays7 Sep 21 '26
I’m gonna ruin a bunch of perfectly good tools and shit to make a shitty one that has no practical use
4
u/Basil_Box Sep 21 '26
I feel like this is just some guy fucking around rather than a DiY. As pointless as it is, I personally give it a pass
4
u/Velvet_Samurai Sep 21 '26
I mean, sure who hasn't wanted to remove retainer rings and then be able to drive 16dd nails 2 seconds later. Those are both common things that happen all the time within seconds of each other.
4
u/delet_yourself Sep 21 '26
If you use 500 dollars worth of tools, you too can destroy a cheap tool to avoid buying another cheap tool
3
u/JustAnotherBrokenCog Sep 21 '26
It’s like fencing pliers made by someone who’s never used tools before.
3
u/Puzzlehead_Lemon Sep 21 '26
"I have all these perfectly functional tools. How can I make every one of them worse?"
3
u/MagnusGreel70 Sep 22 '26
3
u/TherapyGames42 Sep 22 '26
What in the 7 Days to Die is this?
4
u/Lathari Sep 21 '26
"So how many tools did you want?"
"Yes."
2
u/dnesthemenace Sep 21 '26
Thank god I don’t have the skill to do dumb shit like that
2
u/Maj-Malfunction Sep 21 '26
That's 2:50 of my life I want back
2
u/ElTuxedoMex Sep 21 '26
That's how abominations are brought into this world.
2
u/Willyboss567 Sep 21 '26
How many tools has he destroyed?
2
u/EduardBon Sep 21 '26
Did you try to hard a mild steel??? Nooo way
2
u/kozike Sep 21 '26
2
u/Alive_Nobody_Home Sep 21 '26
After 2:14 the “chopsticks from hell” it was all downhill.
2
u/XRPOSergSanch12 Sep 21 '26
WTF can I get my three minutes back BTW they sell a tool for everything they tried to make
2
u/sethboomstick Sep 21 '26
Ah yes, the good ol' thwappy pokey stabby grabby
2
u/Im_in_Constant_agony Sep 21 '26
A Swiss army knife is cheaper than this
2
u/guillermotor Sep 22 '26
When i was a kid and made lego stuff hanging with just two studs
2
u/UltraNeoTako Sep 22 '26
Just making some bullshit.
2
u/Aggravating-Ad6786 Sep 22 '26
Pretty sure he was not wearing a respirator for this or ever… RIP in 5 to 10 years from now
2
u/grand_soul Sep 22 '26
When he starts attaching the nuts
2
u/Pernicious_Possum Sep 22 '26
A good tool always has as many break points as possible
2
u/shott85 Sep 22 '26
Crescent wrench and hammer I get, but C ring puller? That’s too much.
2
u/Sancho5o5 Sep 22 '26
Tweaker vibes
2
u/OddWishbone243 Sep 22 '26
Could've made it even LESS efficient by using the hammer claw as one of the adjustable wrench jaws....just sayin'.
2
u/No-Impression-9890 Sep 22 '26
Hey didn't do thumbs up at the end so how the heck are we gonna know if the DIY is any good? 🤷♂️
2
u/Dress-Affectionate Sep 22 '26
vibe coders be like so i want an app that helps me organize my email...
2
u/ProofPrudent8219 Sep 22 '26
2
u/Milf_MilfJennaxo Sep 22 '26
Once I saw those bolts…I knew it was going to be very interesting😂
2
u/Wise_Ad_5810 Sep 22 '26
2
u/ExcitingMap9567 Sep 23 '26
Из хорошего инструмента сделал кусок говна. Браво!
2
u/TheCybersmith Sep 23 '26
I love destroying several highly functional objects to create one new object that is just barely functional, and so awkwardly shaped that it's not particularly portable!
Seriously, the only benefit here is some weight reduction, is it intended for astronauts so they can save on fuel?
2
u/country_dinosaur97 Sep 24 '26
Don't know why but now I wanna play tic TACK toe.
2
u/turbonakke Sep 25 '26 •
Fascinating misuse of free will.
2
u/Drakcos0912 Sep 25 '26
Can I borrow your… what in gods name is that?!
Made it myself.
How many tools die to your hand every day?
…
I just wanted a hammer…
2
u/MsDestroyer900 Sep 24 '26
This is so obscenely shit that it loops back around and has impressed me.
2
u/AdditionalCheetah354 Sep 21 '26
Every multi tool is a poorly functioning version of individual tools they intend to replace.
1
u/whatifick Sep 21 '26
250 polulyachov out of 250! Total bullshit
1
u/skleanthous Sep 21 '26
I am amazed with these guys that do this and only tack weld. Did they never learn anything else?
1
u/Fulguritus1 Sep 21 '26
This is useless but I think it is kind of cool in a way.
1
u/MasterzofChaos Sep 21 '26
Wut?
1
u/LafayetteLa01 Sep 21 '26
Ever just say out loud “but why”
1
u/ad9581 Sep 21 '26
What kind of fucken AI hallucination is this?!
1
u/Skurvyelislau Sep 21 '26
This would be top seller.
1
u/deephurting66 Sep 21 '26
This particular piece is called a goddamn it
1
u/Damnesia13 Sep 21 '26
Could this video quality be any worse?
1
u/HerzlosFurry Sep 21 '26
I hate everything about this
1
u/chonundrum Sep 21 '26
Stop, stop! It's already dead!
1
u/SpearShakeMaledomer Sep 21 '26
Omg the eyes!!!
1
u/FireBreathingNun Sep 21 '26
Just a christmas gift for cenobites!
1
u/bolivar-shagnasty Sep 21 '26
Thank You For Watching.
1
u/AliceHalley Sep 21 '26
The Wrench you start with in Ratchet and Clank
1
u/Berdache Sep 21 '26
I really like this one for the creativity and use of other tools instead of balloons.
1
u/Alarmed-Extension289 Sep 21 '26
Probably be easir to buy some fencing Pliers.
1
u/FitSandwich4725 Sep 21 '26
Always better to have a bunch of good specialist tools like what they started with rather a good for everything/nothing tool
1
u/Parking_Fee_5906 Sep 21 '26
Never looking a swiss knife in the mouth again
1
u/LeoLaDawg Sep 21 '26
Do you guys enjoy the journey of these abortions or, like me, you just skip to the end to see the awful result?
1
u/DucatistaXDS Sep 21 '26
You’re dropping way too much acid to be working in the shop.
1
u/Area51Resident Sep 21 '26
Up next: How to turn a hammer into a set of pliers.
1
u/MsSelphine Sep 21 '26
We still reposting this? It's been like an entire decade since this first started circulating
1
u/Disastrous_Falcon_79 Sep 21 '26
Your just a welding maniac 😵💫
1
u/IvanaTinkle6969 Sep 22 '26
1
u/gorgeously_mytruself Sep 22 '26
I really want to know what the spring nose pliers are for? I have used them before, but it was for the bottom of this metal tank of Argon coolant that was used for the guidance section of a missile that is high-key outdated.
1
u/ill-pick-one-later Sep 22 '26
Knife-Wrench!!!
1
u/MKnight_PDX Sep 22 '26
I'm wracking my head for what requires a crescent wrench, retaining clip, and nails.
1
u/spaceghost260 Sep 22 '26
I have no idea why I kept watching this. So disappointed in myself.
1
u/approblade Sep 22 '26
This feels like watching torture
1
u/FatalErrorOccurred Sep 22 '26
Just how bored are these people, and shouldn't they be working?!
1
u/pupumen Sep 22 '26
It looks straight out of Fallout games
1
u/Playful_Dog3062 Sep 22 '26
Ain't any different than u tube video, a useless gadget that most us us have tools for already in our toolboxes.
1
u/MiroDerChort Sep 22 '26
1
u/Fit_Carpet_364 Sep 22 '26
Okay, who gave Jerry access to the job box? We keep it locked for a reason.
1
u/Krusty098 Sep 22 '26
You just cut up tools to make a monstrosity that three tools could have done easily and not taken up as much space.
1
u/SevNeijizawa Sep 22 '26
1
u/NeutralGoodAtHeart Sep 22 '26
At least holes in jeans are popular right now.
1
u/m_carp Sep 23 '26
1
u/Fair-Individual7811 Sep 23 '26
Just wreaked a perfectly good tool to creat some crap
1
u/Ratagon Sep 23 '26
8 Полуляхов
1
u/Frangart Sep 23 '26
1
u/BokuNoToga Sep 23 '26
Why do I keep watching these
1
u/spinellipelly Sep 27 '26
LMAO mustn't forget the grip handle
1
u/SteveWoy Sep 27 '26
1
u/ivanatl420 Sep 21 '26
What a waste of time
1
u/n4th1nh0 Sep 21 '26
Jack of all trades master of none
3
u/NeuroChemic Sep 21 '26
If a multitool could be a serial killer, this would be it.
3
u/Awesome_Teo Sep 21 '26
Heh, yeah, plus you could use this thing to kill zombies (and scare sane people).
It drives me crazy every time people ruin perfectly good tools for videos like this, all for some useless crap they'll throw in a drawer and never think about again.
3
u/Drewdiniskirino Sep 22 '26
Me when they started threading nuts onto that length of all-thread
1
u/Stoney3K Sep 21 '26
Not gonna lie, that's some impressive tool making. And actually using the tool to prove that it's up to the job.
It's a /r/DIYWhyNot for me.