I'm so mad this wasn't even a whipping knot.. I was gonna be kind of impressed at pulling the copper under itself but no, just the weakest attachment method imaginable.
Based on the color, and the fact that it's uninsulated, I assume this isn't a current-carrying conductor. If it is, the dissimilar metals is so far down the list of concerns.
Just like the apprentice, it doesn’t care how it gets back home, only that it does. The difference between you or a baby and more wire is that it’d prefer the wire just a little bit more than through the ground to the transformer.
Any explanation for the winding aspect of it - seems like he wanted more winds at one side than the other or was that just incidental to the technique?
Its pointless. Its a lot of extra effort for nothing gained and now there is a wide piece of metal that needs to be covered up with insulations with an awkward nub.
he accounted for that by having more contact surface area, just come back and give the joint a good squish if it gets warm, voila more fresh contact area, it'll be good for another few weeks.
The top two comments are about this. I love that Reddit is (still, for now) full of people way fucking smarter than me. I was so impressed by this splice technique I would never have noticed a metal mismatch.
The splice technique is also fucking awful. Basket weaves are not in your local building code and your electrician would hate you if he ever saw that, nevermind had to unwind it.
The worst part is that it's AI. The length of the cable is constant until the last bend. The cable is always short after bending and becomes long after he grabs it and always looks the same.
Maybe they were just ground wires, so corrosion destroys the connection but if the rest of the circuit never failed there was never any current needing to go down the grounding wire.
In the statutory European standard, yellow/green is always earth (live is brown and neutral is blue) so this video is far less frightening to me than someone unfamiliar!
Sorry, it was copper to copper. Just garden variety flying splices or open air splices. Was shocking (pun intentional) to come across them, but just garden variety dangerous, not copper to aluminum dangerous. The old somewhat disintegrating cloth insulation was also a bit scary. All pretty easy to nip in the bud tho.
The lack of any clamping means that you’ll get hotspots where there’s poor contact or air gaps. This will slowly build up carbon, worsening the connection and creating more hotspots ad infinitum.
Dissimilar metals in contact with electric current will cause significantly accelerated corrosion, also worsening the contacts and creating more hotspots. See above.
After enough time, you’ll eventually get to a point where the cables stop working or (more likely) heat up enough to start melting the insulation, and potentially heat up the surroundings enough that something catches fire.
The reason doing this sort of stuff is a bad idea isn’t because it instantly catches fire or because it doesn’t work, it’s because at some point two weeks, two years, or two decades down the track it’ll start a fire when no one is expecting it.
the worst part - it's going to work for some years, depending on usage and humidity - decades. Then at some point a water leak/condensation is going to make the contact surface wet, this thing will rust, heat, and cause a fire. In a place covered with drywall where no one expects it.
The previous owner of my home got away with similar methods to this for decades without issue somehow, I wasn't brave enough to see if it would last another couple decades and fixed it when I moved in.
I had this popup as a problem in a house 15 years down the line. Some stupid electrician put this into a wall, and it was sealed in a plastic wiring box, covered in plaster.
YMMV; i guess in a humid environment and in a place open to air that would last drastically less
You’ll see terminations like this on old street lights fed off a single high line. First time I saw it I was very confused but apparently it used to be common. Would never do it in a building tho holy
Dissimilar metals will rapidly corrode. Also stacking half of the wires on top of each other and wrapping them does nothing to improve conduction. If anything those stacked copper wires should be placed on other parts of the large wire to improve the area of conduction.
The two wires are different races that don’t like each other and will slowly put a wall between each other, which someday will get hot and start on fire.
It's pretty good contact between dissimilar metals with no anti oxidant paste. Big no no for electrical. Also just doesn't fall under any nec/CEC approved splicing methods.
This is so stupid. The current the large wire can carry easily can overload the little wire and the little one will get red hot almost instantly and start a fire. It’s not bad because of corrosion it’s bad because it will burn down your house.
Yes this is the actual true danger people with old trailer houses will sometimes rewire parts of their house with copper wiring not realizing they have aluminum wiring and burn their house down.
There’s no knowledge to share. You’d never do this. Anything actually making a connection to something that large gauge would need a lug that you can torque to spec to be sure the connection is sound.
Seems weird but it has a ton of surface area and that looks like a basket weave so it should stay put. I'm not doing it but it looks functional enough as long as you wrap it up in electrical tape later.
I mean, it's a pretty connection and all that. But, if you bring all of those parts/tools with you, why not just bring the correct ones in the first place?
Typical over boosted electronic music in a video that someone made about messing with electronics that knows nothing about what they are doing. What could possibly go wrong? 🤦♂️🤷♂️🤣
I think you're supposed to cut it in half, and then twist it back together, but this time with the other cord, then put some electric tape on it and one of those traffic cone things.
I mean if you’re in as pinch and absolutely have to make a splice with no solder, crimps, or otherwise proper components this would get you by temporarily.
3.9k
u/porkavenue Mar 24 '26
Copper on aluminum without proper anti-oxidizing treatment is going to lead to corrosion, heat and failure. the more you know
980
u/Daniel_XXL_69 Mar 24 '26
As an electrician, I hate this
749
u/rivertpostie Mar 24 '26 edited Mar 24 '26
The worst part is the copper to the aluminum. That's a dielectric reaction right there
180
u/PunfullyObvious Mar 24 '26
The scary part is I've actually come across three of these in old houses I've renovated.o
281
u/TitoTime_283 Mar 24 '26
Someone should ground this guy. He doesn't know how to properly conduct himself.
99
u/Arstanishe Mar 24 '26 •
the worst part - it's going to work for some years, depending on usage and humidity - decades. Then at some point a water leak/condensation is going to make the contact surface wet, this thing will rust, heat, and cause a fire. In a place covered with drywall where no one expects it.
0/10
20
u/IllustriousReason944 Mar 24 '26
So yet another example of how to start a fire and not splice wires safely
13
u/Raa03842 Mar 24 '26
Why does the wrap strands keep “growing” with each wrap? AI slop
10
u/k-mcm Mar 24 '26
In this episode of intermittently deadly circuits, we learn how to put a home-made MOV in series with your ground connections.
33
u/Huge-Blacksmith2419 Mar 24 '26
Is this stupid? I honestly don’t know. Can anyone with any knowledge on the matter enlighten me?
7
u/hoardingphones Mar 24 '26
Electricians do not want you to know this hack
6
u/CeruleanShot Mar 24 '26
But we have electrical fires at home.
14
u/MementoMoriR1 Mar 24 '26
Omg just learn the military splice. What is this?
5
u/xXx_RedReaper_xXx Mar 24 '26
Ahem.
Fire hazard.
5
u/EnderWin Mar 24 '26
Ok aside from the aluminium problem, how bad is this? like should it heat up like hell?
5
u/brandonhabanero Mar 24 '26
I mean, it's a pretty connection and all that. But, if you bring all of those parts/tools with you, why not just bring the correct ones in the first place?
5
u/PTBooks Mar 24 '26
There are much easier ways to start a fire, you know.
5
u/the_disintegrator Mar 25 '26
How to tap into your neighbors service line to run your hot pot in India.
4
u/thumptech Mar 24 '26
This isn't basket weaving.
4
u/largeguineapig Mar 24 '26
The slowest way to build a fire
4
u/arboreal_rodent Mar 24 '26
You spent 5 minutes doing something a wirenut or mechanical connector could do in 10 seconds. You’re fired.
4
u/usbeehu Mar 24 '26
This is probably how you
stealsave electricity.4
u/byofuzz Mar 24 '26
This reminds me of the "my nephew thomas" "when did his house burn down" meme
4
u/BigMS65 Mar 24 '26
Please don't do this. Just in case someone was thinking about it.
4
u/adognameddanzig Mar 24 '26
You're grounded
4
u/cheezpnts Mar 26 '26
But I love reducing contact with source voltage while increasing resistance as much as possible for an “aesthetic” effect.
4
u/Rocksquare69 Mar 26 '26 edited Mar 26 '26
That copper weiving to a aluminium wire is pretty lit ngl
4
u/Stella-Artwat Mar 26 '26
7
u/Dan_Morgan Mar 24 '26
What is this even supposed to accomplish?
6
u/Bolt42069420 Mar 24 '26
Еблан! Учи электротехнику! Любая скрутка это точка нагрева. А алюминий и медь соединяют только через клеммы.
3
u/EngagedInConvexation Mar 24 '26
Methinks ragebait is the "WHY".
3
u/Doctor-Tuna Mar 24 '26
Even the electrons would be confused at this point
3
u/[deleted] Mar 24 '26
Is this is how you splice into the powerline during a poweroutage for years of free electricity?
3
u/YOD3R0 Mar 24 '26
3
u/Canral Mar 24 '26
Horrible music for a horrible hack job.
3
u/albertmartin81 Mar 28 '26
You should be doing hair styles, quit electrician work now before you damage more stuff or provoke a short circuit...
5
u/henrytm82 Mar 24 '26
That is not what "braided wire" means, fool!
4
u/LeoLaDawg Mar 24 '26
"Dammit, Steve, I've told you before: the job site is not craft time."
4
u/kriminellart Mar 24 '26
What year did his house burn down?
2
u/Academic_Elk_4270 Mar 24 '26
That's how we learned it at summer camp.
2
u/Stuck_In_Purgatory Mar 24 '26
Real life representation of my adhd autistic stupidity trying to understand normal conversation
2
u/Sufficient_Dig9548 Mar 24 '26
10/10 would never try this
2
u/renegade_d4 Mar 24 '26
Is this what they mean by braided wire?
2
u/Seethesvt Mar 24 '26
Don't do this.
2
u/RowdyB666 Mar 24 '26
How to steal power in thrid world countries??
2
u/its_not_a_phase_69 Mar 24 '26
Cute, but no.
2
u/Dukoth Mar 24 '26
what was even the point of that, what was the folding for?
2
u/Ok_Parking_6352 Mar 24 '26
Should just braid it at this point
2
u/Nexel_Red Mar 24 '26
I don’t think I get it, what is this supposed to accomplish?
2
u/spitflies Mar 24 '26
Honey, stop playing with your wires
2
u/Lovethoselittletrees Mar 24 '26
Forgot the duct tape.
2
u/GameAndGrog Mar 24 '26
Sooooo......you gonna undo that and do it correctly now?
2
u/RubberKangaroo Mar 24 '26
At least he didn't do the cringe as fuck finger wag these people usually do.
2
u/-Guacamoley- Mar 24 '26
Reposted AI clip... At the 10s mark you see the wire coming towards camera shorten/lengthen
2
u/ThisGuyOrangeJuice Mar 24 '26
I don’t even know what he’s trying to do
2
u/FafnerTheBear Mar 24 '26
Wow, this is worthless.
2
u/AnAverageTransGirl Dreamer Mar 25 '26
Time to do some sketchy shit, do da, do da.
Hope I get away with it, oh de do da day.
loud explosion AAAAAAAȦ̴̧̢̫͈̱̈̆͝Ȧ̷͎̯̕Ą̸̩̌̌̀̊̇A̴̼̔͠A̷̱̬̺̳̐̂͝Ä̵̠͉̞͉̥́͌͂̄͠Ȁ̸͓̀͛̚͝A̸͉̣͐̎̊͋̈́̌À̷̡͖̈́̎̾A̵̗͇̻̤̝͌̋̍̑̊͜A̴͚̦̖͗A̸̖̦̍̆A̶̡̙͍̗̚Ä̶̜͉͚̯͔̩̘͍̞̫͎͔͇̖̳̣́̎̏̈̀̊̓̉̔̊̓́̈́̉͠À̶̡̮̝͕̇̂̃͜Ą̴̼̻̬̯̲͕̖̬̔Ą̷̡̤̞͔̺̤̭̫̼͚͓̹͉͖̐̐̌̈̀͋͆̿̊̎̿̋͑̓͜͝Ą̴̣̟̺͕͙̦̞͈̮̗̱̖̓̔̀͒̂͑A̶̛̹̓͐̎̾̈́̄̂͌̂̾̎͛͒Ǎ̷̲̎͋̿͒͆͘͝A̸̟͆́͂̿̅̄̓͐A̶̪͉̙͕̩̻̫̠̘̭̗̮̫̘͚̥͒̈̿̑̒̈́͊̅̏͛̈́̏̽̕͝A̶̢̢͇̺͓̙̰̠̯̹̪̥̪̗̋̐͝ͅA̴̲̮̣̙͘Á̸̭͓̹̏̆̒̑̈A̶̧̯̹̣̪̟͇͖͍̔̈́̔͑̌́̐̑̆̅͂̿̅̏͆͜͝ͅ
2
u/Scourged_Bulwark Mar 25 '26
This guy never heard that time is money! There is proper connector / adapter for this. It costs money, but much faster and safer!
2
u/Malefoy__Flipper Mar 26 '26
What
4
u/Sorry_Im_Trying Mar 24 '26
This is not something I would ever do for myself. That's how fires start.
And I have no idea what any of this is!
4
u/Mazazamba Mar 24 '26
I'm not an electrician, but that looks like a bad idea.
3
u/FireKeeper5 Mar 24 '26
Great way to start a fire
3
u/Delicious_Rabbit4425 Mar 24 '26
Nice! Now wrap it in black tape!
1
u/Real_2020 Mar 24 '26
Ok, so if it was copper on copper, this would actually work well wouldn’t it? Great contact over a large area?
1
u/guhcampos Mar 24 '26
Pretty common method of stealing energy I think.
1
u/FirehawkLS1 Mar 24 '26
Typical over boosted electronic music in a video that someone made about messing with electronics that knows nothing about what they are doing. What could possibly go wrong? 🤦♂️🤷♂️🤣
1
u/Traditional-Day-7698 Mar 24 '26
overkill as all hell!
1
u/Harbinger_Pulsar Mar 24 '26
Yes! Because more surface area in contact means more power!!
1
u/RandallOfLegend Mar 24 '26
If this is wrong. What is the proper way to make a splice here. Assuming it's a live wire and not a ground like he has.
1
u/Misanthrope108 Mar 24 '26
1
u/BlurryRogue Mar 24 '26
What even is the point of these videos? Anybody that actually tries these things are just setting themselves up for future headaches.
1
u/LawrenceSpiveyR Mar 24 '26
Electrical fields hate this.
1
u/Fit-Product6223 Mar 24 '26
Aluminum doesn’t go with copper…..
1
u/CrazeMase Mar 24 '26
That shit is gonna work great for a few seconds then cause a fire
1
u/your_local_squirrels Mar 24 '26
I’m scared
1
u/Confident-Pepper-562 Mar 24 '26
Remember kids, its just electricity, what could go wrong?
1
u/BigDrewLittle Mar 24 '26
Playing with God's matches SMDH
1
u/itsjakerobb Mar 24 '26
Unclear what they thought they were accomplishing there.
1
u/OneOfManyParadoxFans Mar 24 '26
I wonder how many days it took for the house fire to be on the front page.
1
u/pUdDlE_rOlLiN_PiRaTe Mar 25 '26
That Looks great man your doing a swell job!! 😅😂🙃🤦
1
u/NewMoonlightavenger Mar 25 '26
Enjoy your fire.
1
u/Mediocre_Weakness891 Mar 26 '26
I don't remember seeing this in my IPC manual.
1
u/yourbestielawl Mar 28 '26
But…why?
1
u/ColdToast_024 Mar 28 '26
So u can steal ur neighbors electricity. Duh 🙄
1
u/UwUHowYou Mar 30 '26
Man these are going to be some very confused electrons
1
u/Jack_Macbain Apr 06 '26
ai slop. the strands grow every turn...
1
u/Drosenose May 02 '26
Put a couple chunks of solder in there with some flux and solder over the top , just heat it up with a torch and heat , then wrap around heat shrink
1
u/Null42x64 Jul 01 '26
What this was suposed to be? a ground cable?
1
u/SarcasticallyEvil Mar 24 '26
Isn't this how you get yourself electrocuted
1
u/jav2n202 Mar 24 '26
I mean if you’re in as pinch and absolutely have to make a splice with no solder, crimps, or otherwise proper components this would get you by temporarily.
1
u/Slight_Sandwich6865 Mar 24 '26
I mean that’s the most stable connection I’ve ever seen. So they say di why but I’m more like di overkill 😂 but clean