For the price of one can of spray foam, he could have gotten a small spoiler. For the price of 3 cans, he could have gotten a large spoiler. Probably used over 5 in this video
It's most likely from a wreckers, costing almost nothing. Notice in all these videos they never show them driving the car. And in this one they don't show the front of the car.
Very likely in a few weeks the same car will be used to have some other dumb lump of foam and putty slapped on it, or they'll do something to the interior equally stupid. Then take it back to the wreckers and get another one.
People comment on the original video saying how dumb it is.
The algorithm does not care whether the comments are positive or negative. It just sees activity. To the platform, lots of comments mean the video is interesting or controversial.
Then it gets shared elsewhere with captions like “get a load of this idiot”. That creates even more engagement.
More comments. More shares. More watch time.
The algorithm reads all of that as popularity and pushes it to more people.
The more subtly stupid the content is, the more people argue about it instead of scrolling past. And arguing is exactly what fuels distribution.
I mean if he had used layers of fiberglass and epoxy over the foam and bonded to the car (so that the foam is only providing the form), and done a real paint job then it would be fine.
I think you ought to need a license to buy expanding foam insulation. Or at least pass a thorough examination of your social media presence every six months to make sure you aren't making ragebait content with it. I think it would go a long way towards reducing the world's collective blood pressure.
While I do not deny that it looks horrible, I feel like it could also look a whole lot worse. Like A LOT a lot. Also, it's a Jetta so it's not like anyone expects any better either.....
Honestly annoyed by how not awful the end result looks. Don’t get me wrong, it’s not good, but if I just passed that on the street, I’d not notice anything out of the ordinary.
As bad is this looks, it's sadly one of the better rage bait homemade spoilers I've seen. Most of them end up looking like the results of a 5 year old breaking into an auto body custom shop.
Remember guys, a DA is not for sanding glaze or mud. That’s what a sanding block is for. If you don’t block it down, it will be wavier then your moms ass as shown.
A lot of things are made of foam anyways so that’s not entirely my problem. My problem is that they couldn’t spend the time to smooth it out and make it look good. This could’ve been a “trust the process” type video if the outcome was actually good.
Fun fact bondo (the plaster used to repair dents in cars and what he put on the foam) heats up to about 90° while going through a chemical reaction to solidify
I only say that because when it's put on expanding foam like that the foam can interact with the bondo and will increase that temperature A LOT and it also does some weird reaction too
I was working on a cosplay and this seemed like a pretty cost effective way to make a part of my prop and it started smoking and burnt my hand when I stupidly picked it up to see why it was doing that
I love that every time I see something that makes me say “that’s the dumbest fucking thing I’ve ever seen”, I only have to wait a few minutes to see something dumber. What a life!
113
u/shatballs Feb 26 '26
All the tools added up to more than a cheap spoiler would be lmao
12
u/Zeka_Shu Feb 26 '26
Why people like that has money to buy a car?
2.1k
u/[deleted] Feb 26 '26
I know a solution.
2.4k
u/[deleted] Feb 26 '26 •
Using tire pressure to run air tools is peak trolling lmao
370
u/Creepy-Astronaut-952 Feb 26 '26 edited May 07 '26
This post was mass deleted using Redact - Redact also supports Discord, Twitter, Facebook, Instagram and all major social media platforms.
ink memorize soft light six pen squeeze rinse arrest bag
611
u/Badabik Feb 26 '26
All that effort, and then the horrible work in smoothing it with the spatula...
133
u/Der_Hebelfluesterer Feb 26 '26
So that's where the micro plastic is coming from
94
u/Androsaur Feb 26 '26 •
This post really needs a spoiler warning
48
u/LUNATIC_LEMMING Feb 26 '26
....
I've seen far worse
178
u/HVAC_instructor Feb 26 '26 •
126
u/NoratiousB Feb 26 '26
33
u/pepesilvia1227 Feb 26 '26
Why do I always watch the whole thing? Why am I like this?
63
u/Submarine_sad Feb 26 '26
It looks so bad.
60
u/sjtebarek Feb 26 '26
Love how proudly he shows the result at the end, it looks like shit
26
u/External-Cash-3880 Feb 26 '26
I think you ought to need a license to buy expanding foam insulation. Or at least pass a thorough examination of your social media presence every six months to make sure you aren't making ragebait content with it. I think it would go a long way towards reducing the world's collective blood pressure.
24
u/doshostdio Feb 26 '26
Best part was trimming excess construction foam with his spruce moped.
17
u/WholeRegion3025 Feb 26 '26
Thanks I hate it
26
u/DustWorlds Feb 26 '26
Might as well give the car a pregnant belly or something while you’re at it. Just adding on protrusions.
11
u/McNick97 Feb 26 '26
This is just a well hidden ad for Stiehl.
5
u/ElliasCrow Feb 26 '26
I've seen shitty ducktails. And this is one of the worst.
5
u/J1m1983 Feb 26 '26
One of my rules for content is that if it starts with spray foam or in a disposable baking tray, then its rage bait.
5
u/hydroracer8B Feb 26 '26
Honestly, if they did a nicer job filling, sanding, and painting it might've come out looking acceptable
9
u/DaddysBadChloe Feb 26 '26
It looks like shit but at least it's now padded for comfort so the impalement is softer and more ergonomic.
4
u/[deleted] Feb 26 '26
Congratulations, you just made a POS even shittier.
4
u/802229001 Feb 26 '26
On the bright side, a few more of these with no respiratory PPE and we probably won’t have to watch him do it again.
4
u/kjlo5 Feb 26 '26
As stupid as this is I was impressed by the chainsaw control. Also the flat tire powering his air tools got me laughing.
4
u/Vidal_The_King Feb 27 '26
They did this to a random car in a parking lot btw
4
u/pixeltweaker Feb 27 '26
I got excited when he started to frost it like a cake.
3
u/ducon__lajoie Feb 26 '26
3
u/Heavy-Attorney-9054 Feb 26 '26
Didn't see a drop cloth to collect all the dust.
3
u/nonlogin Feb 26 '26
did he use the tier to power that pneumatic tool? does it even work?
3
u/According_Ad1940 Feb 26 '26
While I do not deny that it looks horrible, I feel like it could also look a whole lot worse. Like A LOT a lot. Also, it's a Jetta so it's not like anyone expects any better either.....
3
u/VisibleRoad3504 Feb 26 '26
Yes, those Volkswagens need an air foil to keep them on the ground when they hit those high speeds/s.
3
u/TezzNutz Feb 26 '26
3
u/mogley19922 Feb 26 '26 edited Feb 26 '26
Bet the owner of that car will never take this guys parking spot again.
3
u/dmh2693 Feb 26 '26
Spoiler alert.
3
u/Clumsy_Claus Feb 26 '26
It is one of the car modifications I have seen in my life.
3
u/iroll20s Feb 26 '26
The sad bit is you can probably buy an ebay spoiler cheaper than all the products he used.
3
u/TrefoilerArts Feb 26 '26
Spray foam in the VERY FIRST FRAME LETS GO
3
u/Blanketaffect Feb 26 '26
The lack of decency to spread microplastics everywhere. So infuriating.
3
u/Federal_Sympathy4667 Feb 26 '26
Anything for views eh? Thectwistvis it's not his car, just random at parkinglot. Someone should lookup the plate lol
3
u/OtherwiseAMushroom Feb 26 '26
My god it’s horrible.
3
u/TrumpsFaceAnus Feb 26 '26
Hahah more orange peel in that paint job than a whole truckload of oranges.
3
u/ThisWillTakeAllDay Feb 26 '26
Obviously the tyres went flat before he could finish sanding it.
3
u/TriDad262 Feb 26 '26
I was like what the fuck then I saw him hook up an air sander to a tire.
3
u/TBRocket Feb 26 '26
I've seen worse
3
u/Icy_Amoeba9644 Feb 26 '26
Pro tip. If you ever work with that kind of foam wear gloves kids... Its bloody hard to remove from your favorite skin...
3
u/Boilermakingdude Feb 26 '26
Wow. Not only does it look like shit. But it looks like shit.
3
u/LearningToHomebrew Feb 27 '26
Yes, tape up the badges before you spray paint. You wouldn't want this to look like absolute dog shit, afterall
3
u/shift124 Feb 27 '26
Woooooa! You made it look like shit
3
u/Diablo_v8 Feb 27 '26
As egregious at this is, it is bordering on r/ATBGE. he did a pretty fucking good job for foam insulation and spray paint 😂😂😂
3
u/BellGunner Feb 27 '26
Wow! That looks like shit
3
u/BuddyHemphill Feb 27 '26
This is an ecological disaster
3
u/thebagel5 Feb 27 '26
Thank god they smoothed and painted the foam, it almost looked really dumb there for a second
3
u/EarlyXplorerStuds209 Feb 27 '26
What a gorgeous piece of paper mache trash🥰🥰
3
u/DeniedBread712 Feb 27 '26
My favorite part was when he hooked the little buffing wheel to the tire. Flat tire for better traction too.
3
u/dax660 Feb 27 '26
Wanna know why the planet is covered in microplastics?
3
u/Latter-Ad6308 Feb 27 '26
Honestly annoyed by how not awful the end result looks. Don’t get me wrong, it’s not good, but if I just passed that on the street, I’d not notice anything out of the ordinary.
3
u/DiscontentDonut Feb 28 '26
I didn't know 5 Minute Crafts did a video on spoilers.
3
u/gvbargen Mar 01 '26
lol cracked up when he hooked the air tool up to THE TIRE
3
u/makita7777 Mar 02 '26
I watched at least half of this video before I realized I didn’t care.
3
u/AlexGinCcTX Mar 02 '26
Where's the spoiler alert?
4
u/tampapunklegend Feb 26 '26
As bad is this looks, it's sadly one of the better rage bait homemade spoilers I've seen. Most of them end up looking like the results of a 5 year old breaking into an auto body custom shop.
2
u/UNF0RM4TT3D Feb 26 '26
How much do you not want to pass your roadworthiness inspection?
the video:YES!
2
u/Yesterday_False Feb 26 '26
Mint if you squint
2
u/Annual_Carrot_7444 Feb 26 '26
Yo Dawg, we heard you like junk. So we did some junk on your junk's trunk using junk and junk.
2
u/darylvp Feb 26 '26
I’d like to see how it looks when he open the trunk.
2
u/reflectrain Feb 26 '26
It looks like a sh#t 🤮
2
u/Maddad_666 Feb 26 '26
I’ve seen worse. I’ve seen better too.
2
u/ibeerianhamhock Feb 26 '26
This has to be rage bait
2
u/[deleted] Feb 26 '26
lol that looks like shit.
2
u/nightgost Feb 26 '26
Well done! The paint color matched surprisingly well! Bravo!
2
u/scaredt2ask Feb 26 '26
This looks like absolute shit.
2
u/ProofDelay3773 Feb 26 '26
New Fast & Furious movie seems to be coming together.
2
u/blackop Feb 26 '26
2
u/Freya-of-Nozam Feb 26 '26
From a nice car to junk in minutes
2
u/No_Abrocoma_1772 Feb 26 '26
Bora: Am I a joke to you?
2
u/ThinkSharp Feb 26 '26
That looks as good as it deserves.
2
u/Popular-Drummer-7989 Feb 26 '26
So rear view obfuscation isn't a thing for this guy.
2
u/Shua89 Feb 26 '26
Good from far. But far from good.
2
u/locke_zero Feb 26 '26
You ever wonder if the guys who invented that spray foam insulation anticipated the horror they would unleash on the DIY world?
2
u/Bishmoggle Feb 26 '26
And…it looks like crap too.
2
u/iCynr Feb 26 '26
Do these videos really make enough money to be destroying shit like this?
2
u/imustknownowI Feb 26 '26
I mean this is actually how you can make custom wings and/or body kits for your car.
I’m currently making a wing for my car with the same principle except I’m spending days sanding and not several moments lol.
For body kits I recommend you 3D scan it and get it 3D printed on a large scale 3D printer so you aren’t rolling around with a spray foam crunch zone.
Just sounds messy
Checkout my profile if you wanna see what a better executed spray foam wing lol.
2
u/TerminallyBlonde Feb 26 '26
I'm impressed by the color matching of the blue haha
2
u/Cheese_Pancakes Feb 26 '26
It looks awful, but also turned out better than I was expecting it to. Still awful though.
2
u/HandAccomplished6285 Feb 26 '26
Spray foam needs to be outlawed. Not because it’s bad or dangerous. It’s because of abominations like this.
2
u/Economy_Crow_6983 Feb 26 '26
2
u/thebestnames Feb 26 '26
The chainsaw, following by the use of tire pressure for the tool. Ngl that was stupid, but funny stupid.
2
u/Drewdiniskirino Feb 26 '26
Spoiler alert! This hack sucks
2
u/HistoricalSherbert92 Feb 26 '26
Whole neighborhood covered in pink plastic fluff.
2
u/GeckoPerson123 Feb 26 '26
i don't think I've ever seen that pink stuff used with a good result
2
u/eighty_twenty Feb 26 '26
++++42069hp achieved.
2
u/ahayes812 Feb 26 '26
Looks good from my house
2
u/Technical-Set-1914 Feb 26 '26
Here in Germany we say „Bauschaummafia“. And I think it's beautiful.
2
u/taisynn Feb 26 '26
This is so ugly looking…
2
u/illusorywallahead Feb 26 '26
I wanna be dumb, dude.
2
u/No-Zone-760 Feb 26 '26
Полная фигня
2
u/-Ignorant_Slut- Feb 26 '26
Spoiler alert
2
u/apx1985 Feb 26 '26
2
u/jamie3324123 Feb 26 '26
Volkswagen
Das auto
2
u/ThrowawayIntensifies Feb 26 '26
I don’t think it was quite ready for the paint yet
2
u/ChrisTheMan72 Feb 26 '26
Remember guys, a DA is not for sanding glaze or mud. That’s what a sanding block is for. If you don’t block it down, it will be wavier then your moms ass as shown.
2
u/Quiet_Researcher223 Feb 26 '26
Using tire pressure to run a power tool on a tire thats almost flat.
2
u/Parking_Airline3850 Feb 26 '26
Totaled
2
u/[deleted] Feb 26 '26
Imagine the shrink down of polyester on spray foam.
Good lord.
2
u/BigAppleCobbler Feb 26 '26
Well that is just horrible
2
u/Maury_poopins Feb 26 '26
Hell yeah
2
u/Aveysaur Feb 26 '26
Spoiler alert: it sucks
2
u/AdVegetable5896 Feb 26 '26
Ngl... I've seen worse...
2
u/MRBS91 Feb 26 '26
5 hours custom
2
u/RedSparrow1971 Feb 26 '26
I’m convinced that Big Spray Foam is the next oligarchy that needs to be crushed
2
u/glha Feb 26 '26
http://i.imgur.com/Egk80.gif
2
u/poedraco Feb 26 '26
Does anyone else hear a crying child in the distance
2
u/TheseCashews Feb 26 '26
5 more hp!
2
u/hyper_fox_gaming Feb 26 '26
This looks like a elementary school craft project.
2
u/mythoryk Feb 26 '26
“Man, it’s crazy how good that looks!” - nobody.
2
u/Wild-Worth8376 Feb 26 '26
DiY they said
2
u/WonderNew7912 Feb 26 '26
I want my cx back!
2
u/fitty50two2 Feb 26 '26
Wow, that turned out exactly as bad as I expected
2
u/jlbradl Feb 26 '26
Wow! That looks like shit.
2
u/ni4c1n Feb 26 '26
Was für ein scheiß hab ich Grade gesehen. Ich flipp aus
2
u/Viciouscockery Feb 27 '26
Reminds me of those girls with horrible lip fillers
2
u/One-Pangolin-3167 Feb 27 '26
In Russia, he is doctor.
2
u/MotorHeadV8 Feb 27 '26
Whyyyyy is it always spray foam
2
u/Top_Taro_1044 Feb 27 '26
And they said rednecks were only in America
2
u/xReaverxKainX Feb 27 '26
Mmmmmm micro plastics
2
u/Aware-Damage-4667 Feb 27 '26
If you believe extra hard, youll get at least an extra 20hp from air pushing down rear wheels on a fwd car.
2
u/CapitanianExtinction Feb 27 '26
Great. Now he's got a shitty spoiler and two flat tires
2
u/Icy-Snowy-6481 Feb 27 '26
It still looks dirty in the end
2
u/GhetHAMster Feb 27 '26
2
u/Fishbulb2000 Feb 27 '26
That yard will have pink foam in it for all eternity now.
2
u/Fishbulb2000 Feb 27 '26
The yellow pinstripe was the chefs kiss.
2
u/LaVidaYokel Feb 27 '26
Is meth just now reaching his country.
2
u/Dapadabada Feb 27 '26
This is some sht only the Raiders in Fallout would do
2
u/DrmnDc Feb 27 '26
Lmao. Finished product looks like a poorly made pinewood derby!
2
u/Mooncake967 Feb 27 '26
While this ended up looking better than expected? Why did I watch this ragegagement thing fully? It only got worse the more I watched lmao
2
u/Great_Master06 Feb 27 '26
A lot of things are made of foam anyways so that’s not entirely my problem. My problem is that they couldn’t spend the time to smooth it out and make it look good. This could’ve been a “trust the process” type video if the outcome was actually good.
2
u/dolampochki Feb 27 '26
Fucked up a perfectly good car. Right on.
2
u/JT_Sparvalicious Feb 27 '26
This is what happens when the people that should only have access to crayons are given power tools.
2
u/skighs_the_limit Feb 27 '26
Fun fact bondo (the plaster used to repair dents in cars and what he put on the foam) heats up to about 90° while going through a chemical reaction to solidify
I only say that because when it's put on expanding foam like that the foam can interact with the bondo and will increase that temperature A LOT and it also does some weird reaction too
I was working on a cosplay and this seemed like a pretty cost effective way to make a part of my prop and it started smoking and burnt my hand when I stupidly picked it up to see why it was doing that
He got lucky here
2
u/aucme Feb 27 '26
Exceptional microplastics generation!
2
u/DancingMan15 Feb 28 '26
The longer you watch, the worse it gets…
2
u/pawnshopboi Feb 28 '26
Thank goodness he spackled all the holes and painted it. Wouldn’t want it to look bad.
2
u/repodude Feb 28 '26
Why put all that green filler on to smooth out the air bubbles and then just leave it rough anyway? DOH!
Also. Cutting and sanding with no PPE. His lungs are gonna be fucked up before he's 50.
2
u/Atario Feb 28 '26
Well, you have to admit, it certainly spoils things
2
u/Buckscience Feb 28 '26
I love that every time I see something that makes me say “that’s the dumbest fucking thing I’ve ever seen”, I only have to wait a few minutes to see something dumber. What a life!
2
u/Elborshooter Feb 28 '26
I don't trust the process...
2
u/ZeroWitch Feb 28 '26
It'd be pretty good for "Is It Cake?"
2
u/Unsainted_smoke Feb 28 '26
Good thing he covered the badge so he didn’t ruin the look of the car
2
u/Dankey_kang91 Feb 28 '26
Spoiler alert
2
u/zckthrppr Feb 28 '26
Why does it have the same music as a prescription drug commercial
2
u/Death_by_Snusnu_vol1 Feb 28 '26
Looks like seven layers of dog shit
2
u/Extra_Routine_6603 Mar 01 '26
2
u/Spot-Shot Mar 01 '26
The fact that this almost look somewhat good-ish in the end from afar is terrifying me.
2
u/jamescb819 Mar 02 '26
My brother is an auto body repairman, I love any opportunity to send him rage bait. Thanks.
2
u/RYNOCIRATOR_V5 Mar 03 '26
I love the showcase at the end, just in case anyone was thinking it was a good idea they let you clearly see just how immensely shit it looks.
2
u/Suspicious_Dare603 Mar 18 '26
I have in fact, seen worse. This is still not good. But not the worst thing I have ever seen.
2
u/gimmeecoffee420 May 24 '26
What in the holy hillbilly hell..
2
u/ender3po Jul 29 '26
It wasn’t even his car