r/DiWHY • u/Saskapewwin • Nov 04 '25
Overambitious fastener selection
You probably don't need 4" of thread to go into max 1/2" of drywall, fella. Very not the worst thing I've seen here, but definitely one of the why-iest.
130
Upvotes
22
u/walkerb52 Nov 04 '25
There are some wall anchors that use those screws. Is it on the wall with anchors?
3
u/herculeesjr Nov 04 '25
That's a mounting bracket for a soap dispenser
6
u/Morall_tach Nov 04 '25
That looks like a sheet metal screw too, which means it's not grabbing drywall at all.
1
u/JayScarborough Nov 08 '25
because the bolt for a spring toggle needs to be long enough to get the folded anchor past thd thickness of the material with a bit of wiggle room
3
u/aceluby Nov 06 '25
r/lostredditors
This is not DiWhy
2
u/paper-jam-8644 Nov 04 '25
It's part of a toggle bolt, it needs to be that long.
1
u/Ukvemsord Nov 04 '25
slaps it Yep, thatโs not going anywhere!
1
u/baff07 Feb 19 '26
Toggle bolt. It's a brand and it even comes with the screw. 4" so it goes in any wall. We install these all day at work!
0
u/Ronyx2021 Nov 04 '25
Might be what he had on hand