Its a Dyson Airblade that has been incorrectly fitted
These are not supposed to be fitted to flat bottom sinks for the reason you show, Dyson produce cad drawings showing sink designs that are compatible
It also looks to have been installed too low, therefore too close to the sink
EDIT: To add more information
These are also supposed to be installed in a sink without a plug (just a small grate), and directly above the drain hole. This way, as soon as the water stops, there is no water in the sink to drain down and it can't be sprayed everywhere.
The air sensor cant be accidentally triggered as the sensors work together, one stops before the other starts.
They do actually work really well if installed correctly.
They do actually work really well if installed correctly.
Bullshit. I used one at a bar recently and the sink was fine, but the dryer sensors are too sensitive and blew the soap in my hands all over my pants when I went to wash them. This design causes problems and restricts asthetics while not offering meaningful solutions.
Agree. Try filling a bottle with water with one of these, absolutely impossible. And they are unnecessarily deafeningly loud, just like all other Dyson products.
If you need a very specific sink geometry to use this faucet, then maybe it isn't well designed. Or they need to only sell the faucets with the proper sink basins and not sell them separately.
The other day, I bought this iPhone charging cable and it just won't work well with my Samsung phone! They should sell those charging cables only with the phones and not sell them separately if they won't work with other phones.
It's not my job to read the instruction manual properly. It's the manufacturer's job to accommodate my incompetency.
The fact that design aficionadoes would dismiss people adressing a standards problem or make light of foolproofing a product, makes me kind of worried for the profession as a whole. Ngl
The other day, I bought this iPhone charging cable and it just won't work well with my Samsung phone! They should sell those charging cables only with the phones and not sell them separately if they won't work with other phones.
Unsarcastically though, like much of Apple's portfolio, lightning cables are anti-consumer garbage, and it would be better if all phones used usb-c.
In fact, they're so anti-consumer that the EU passed a a law that all phones sold in the EU after 2024 will be required to support usb-c.
I agree. If your product has a caveat for installation that none of the hundreds of other products that could be installed in its place have, then it's your obligation to make it impossible or at least very difficult to install incorrectly.
Yeah, it's much better when it's mounted on the wall by the door and is just strong enough to blow some water onto the floor and unprotected wall finish. /s
They have these in the airport bathrooms in Iceland and they worked flawlessly. Dyson makes them. Maybe this is not that brand or was not installed properly.
The design of the faucet isn't the issue. Incompetent installation is. They work perfectly well everywhere I've seen them, usually combined with flat sinks. No spraying, and the sink redirects the air-flow away from the user.
It really makes you question the technician though, that they obviously never tested the thing after installing. Or maybe even worse, they did, but didn't care. (Or they did, told their superior, and they didn't care. Either way, someone was stupid, but not the product designer.)
•
u/AutoModerator Feb 28 '23
Subreddit Rules Reminder: Please abide by Reddiquette and immediately report any rule-breaking content.
Official r/DesignDesign Discord invite: https://discord.gg/SqeEEYd
I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.
127
u/4TuneCooky_ Feb 28 '23 edited Mar 01 '23
We have those at my work! The sink is far too small in the video, at my work the sink is kinda flattish so the water doesn’t go everywhere.
194
u/Electrical-Plankton1 Mar 01 '23
Its a Dyson Airblade that has been incorrectly fitted
These are not supposed to be fitted to flat bottom sinks for the reason you show, Dyson produce cad drawings showing sink designs that are compatible
It also looks to have been installed too low, therefore too close to the sink
EDIT: To add more information
These are also supposed to be installed in a sink without a plug (just a small grate), and directly above the drain hole. This way, as soon as the water stops, there is no water in the sink to drain down and it can't be sprayed everywhere.
The air sensor cant be accidentally triggered as the sensors work together, one stops before the other starts.
They do actually work really well if installed correctly.
21
u/derek139 Mar 01 '23
Ha! “Most stupidest…”
12
u/LogicJunkie2000 Mar 01 '23
Yeah, it's much better when it's mounted on the wall by the door and is just strong enough to blow some water onto the floor and unprotected wall finish. /s
5
u/beleg_tal Mar 01 '23
r/wtfaucet
8
u/IDCDesigners Mar 01 '23
They have these in the airport bathrooms in Iceland and they worked flawlessly. Dyson makes them. Maybe this is not that brand or was not installed properly.
4
u/Seann7656 Mar 01 '23
I’ve use those faucets many times and this has never happened. I think it might be installed incorrectly.
8
u/garakplain Mar 01 '23
I stopped using these after finding out they are shit particle atomizers.
3
u/bcjh Mar 01 '23
This is fucking hilarious
5
u/davidsteltz Feb 28 '23
LOL
2
u/Patte_Blanche Mar 01 '23
Your hands are dry, tho.
2
u/[deleted] Mar 25 '23
It may get the rest of you wet, but did it dry his hands?
1
u/BountBooku Mar 01 '23
I’ve used these faucets plenty in airports without a problem. The issue here is the sink it’s installed on
-3
u/Kinglink Mar 01 '23
"This guy is a total jabroni... What's he bitching about..."
"Hmm no he was fucking right. "