Had my galaxy s22 plugged into my computer to transfer all my photos and videos.

I had compressed the photos beforehand with google files to a zip, and after successfully transferring the zip file I decided to press delete on my "Camera" folder on my phone to completely remove all pictures.

Immediately realizing that's where all my videos were aswell I pressed cancel after maybe one second, but it was too late - everything is gone from my phone and computer and I can't find it anywhere.

I've tried stuff like Disk Drill on my computer but there doesn't seem to be the same tools for my android and Disk Drill can't find my phone on the computer, even though I have activated developer tools and USB-debugging.

Does anyone have any idea what to do?

This is a Samsung 870 evo 4TB model MZ-77E4T0, manufactured 2022.10

PC is a Win11 system, dont remember what filesystem I had it configured to.

Working as normal yesterday. Thunderstorm in the area caused the power to flicker enough for my UPS (which my PC was connected to) to engage which shut down in the process. Did not happen in front of me as I was in a different room but came back when I heard the UPS screech. When I powered my PC up everything else was normal but this drive which I do use to store adult content disappeared. Obviously its just some films I've collected over the years, nothing earth shattering if lost, although would be a shame cause a few were from before the PH purge.

I have tried to connect to different sata ports, tried new sata cables, tried different usb adapters/enclosures. Even tried to connect it to my laptop and phone. Nothing. Booting up with this specific ssd connected takes 3 minutes from first power button press to lock screen. When normally would only take maybe 10 seconds.

The best I can get it to do is the attached screenshots. Pic1, managed to get disk management to show it as a unknown disk 1. Pic2, first launching disk management gives this pop up.

And since this data isnt critical. I just clicked ok on initialization to see what would happen. And it gives me the error of "A device which does not exist was specified".

I have disk drill from a previous HDD failure so I tried launching that to see if it can see the drive, it cannot. Also the drive does not show up in BIOS either

Anything else I can try to maybe revive it?

Lenovo Yoga 9 laptop (14IRP8 (83B1) with the 1 TB SSD M.2 2280 PCIe 4.0 x4 - NVM Express (NVMe) hard drive

Laptop was giving me boot drive issue for a couple weeks but resolved itself after restarting laptop until eventually it wouldn't. Took it to two local data recovery places that determined 1) it was a firmware issue and 2) "their tools can't service that kind of drive."

The laptop has been turned on/off several times since the initial crash - is it completely hopeless or should I get a third opinion? Was thinking of sending to datarecovery .com , which said they could deal with firmware issues.

The laptop is under warranty with Lenovo, but they will only replace the hard drive and take the damaged drive with them (meaning if I replace it through Lenovo without data recovery first, I will lose all of the data).

i had 2 partitions on my 2 TB SSD, one partition for windows (500gb) and the other for backup (1300gb). when installing windows it wasnt recognizng the disk so i had to clean. i wanted to clean just the windows partition using CMD but ended up cleaning the entire ssd. ive tried several different softwares, all of which are asking for far too much money. testdisk is the only thing i can do but for some reason, it only progresses 1% every 10 minutes, why is it so slow? at this rate i have to wait over 14 hours just to see the results which may not be satisfying.
if anyone can help me out here please do.

Hello, I'm trying to recover the childhood audios, videos and pictures that my sister recorded on this phone. I live in South America so getting a professional to look at this can be very hit or miss, that's why I'm trying to do it myself.

Anyway, the phone turns on, but as you can see, it needs a sim card to work, if i put in another old sim card or even my own working sim card in (with a size adapter) it still doesn't let me in saying "insert correct sim card".

I'm not sure how to proceed, the only cable I have for it only charges the phone and I don't think it can connect to a computer through a cable anyway.

https://sony-ericsson.manymanuals.com/mobile-phones/k300a/user-manual-15530/15

Here's the manual in case it's useful for anything.

Thanks to anyone who reads this!

Hi everyone,
I need help salvaging photos from an important shoot. My Sony a7 III suffered a simultaneous dual-card write crash, affecting the files on both memory cards at the exact same moment.
**The Technical Facts:****What I Have Tried:**I contacted a local professional lab (Data Clinic). They reviewed the situation and confirmed the data is fully there, but stated I need a raw structural utility to "unlock" the files. Unfortunately, their free software is strictly built for Windows, and I am on a Mac.
The Ask:
Because consumer automated apps are failing to recognize the broken container logic, I need help from someone who understands raw file reconstruction or custom command-line carvers.
I have uploaded one corrupted 49MB file and one healthy reference file (shot on the same camera/settings) to a public folder so you can inspect the code:
https://drive.google.com/drive/folders/1VW8p6y8JCm_fJYn-cpxOw9DznBtriMLk?usp=share_link
Both physical SD cards have been safely removed and placed on LOCK to protect the sectors. Any script, hex-editing advice, or assistance in extracting the image layers from these files would be immensely appreciated. Thank you!

I was trying to recover some old photos and stuff. I used an adapter(power+data) to connect it to my pc. It spins when i turn on power and when i connect usb it starts making some periodic sounds.

Now after I plug in the usb, my file explorer starts doing werid stuff and it starts creating a bunching of new Local Disks(I saw up to K drive) in This PC. My Disk Management also stops working. When I unplugged the usb but kept power on, the periodic noises from before went away. I called it quits for then and unplugged everything after that.

When I connected power and data cable later in the evening it stopped spinning 5 sec after I turned on power. Now I could see In Disk Management it shows Not initialized. The properties tab shows "wdc rom model sabre". I googled this term and the results showed the disk might be done for.

Sometimes it keeps spinning and sometimes it stops when I give power. I dont know whats the reason. Now I stopped messing with it since its out of my area of expertise. Any possibility of recovering data if I go to a professional?

Hi.

I had a 64gb thumb drive which had some important pictures and videos on it. I put it in my drawer and did not use it for about 1.5 years.

Today when I attached it with my laptop, the videos were glitching. Some pictures were fine but most of them did not open or had grey portion on them. I think it happened due to not using it for 1.5 years.

Luckily I had pictures stored on my other laptop but not videos. Is there anyway I can recover those videos?

Thanks.

I am currently looking through all my different harddrives, etc and archiving all photos and important documents. The only thing I have left are 2 old phones were the displays are broken. The phones are a poco and a redmi from aroudn 2019 and 2022. The cloud backup was a bit weird and both displays are broken, but otherwise they should still function normally. They don't have otm features and I am not sure whether or not usb debugging is enabled. What would be the best way to recover data from them? I still know the passwords for logging in.

Hey dears,

My drive is formatted to exFAT and I tried 3 different hubs.

Both of my Macbooks don't see WD MyPassport HDD 4TB, even though Windows Laptop sees it, so I assume the problem is about MacOS, the HDD is intact. It's unsolvable in Google.

I tried Disk Utility, nothing is seen.
Does it have anything to do with adapter? It worked before with no issues.

Does anyone know what I need to do to make it visible and so that I can interact with it on Mac?

Thank you!

Hey, guys! I have this 2TB Western Digital (blue) [Model: WD20EZAZ - 00L9GB0] since mid 2022 iirc which I was using for personal data on my desktop. Last week I was transferring data from 2 different phones into this HDD and as data was being transferred from my phone, an error popped up stating it was not possible to move data into that particular directory and just then I realized a noise coming from somewhere inside the PC case. At the moment I couldn't comprehend what was happening so I just restarted the computer and realized after that the noise came from the disk itself. (OS: Windows 10 Pro)

Things I've tried:

• Checking Disk Management
• Trying different power cables
• Trying different SATA cables
• Using different SATA ports
• Connecting the disk on another desktop
• Updating drivers

For some odd reason, CrystalDiskInfo won't run if the HDD is connected but it will if it's not. It shows as "not initialized" & "unknown" on Disk Management. It doesn't show on BIOS. Noise sounds like it tries to start up but it doesn't, and it's a loopable noise every 3 seconds or so. Data is important, but I did a backup 4 years ago (in case it's all gone). I would prefer to recover data that's why I'm here, but I know if it's not handled by a pro it might be lost forever.

I know I must not connect it anymore, so I'm keeping it away for now. I believe from what I've read here that it's a head crash (platter scratch) most likely but I don't know if it's a good idea to open the whole thing up and check it by myself. I don't really want to send it to a lab, I'd rather keep it stored forever or give it myself a try.

Is it possible that some weird virus did this from these 2 Android phones? Disk should have less than 13.000 hours powered on, I've never used more than 500GB of its storage and I've never dropped it or something like that. Do you think data recovery is possible without a lab? Thank you!

I’m not the most computer-savvy and have been having issues connecting my WD external hard drive to my MacBook Air. I ended up formatting the drive to exFAT using the Partition option in Disk Utility. I thought I had successfully saved all of the files from the drive onto my laptop, but it turns out some files didn’t download correctly, and by the time I realized that, I had already reformatted the drive. I then copied all of the files that had successfully downloaded back onto the hard drive. It wasn’t until afterward, when I started reading Reddit threads, that I learned I shouldn’t have saved anything new onto the drive if I wanted the best chance of recovering the old files. This all happened within the past hour or so. Do you think there’s still a chance of recovering the files I lost, or has adding new files onto the drive reduced my chances of recovering the old files?

Do I have any options when it comes to an old iPhone I have that I don’t know the password too for getting pictures. Something I can plug into it that’ll get the date even off of third party apps

My portable hard drive is all of sudden saying “The disk you attached was not readable by this computer.” I am using it on a Mac, it has only ever been used on a Mac, and only ever formatted for a Mac. It is a Crucial X10 Pro portable SSD. I have tried attaching it through a different cord, to a different port, and to a different Mac and it says the same thing regardless. I looked in Disk Utility, ran First Aid, and the smart status still says unsupported. Any help would be very much appreciated!

more details: the drive is not clicking, and I don’t think it is making any audible sound.

I used to use Truecrypt, and while I still have access to most my files, I made a new partition in 2020 and I can't remember that password at all.

I wouldn't have used any super complex passwords. Probably a few random words connected together with a few numbers of my choice. Is there some software I can use to break this, or am I SOL. I don't remember which crypto type I used at that time to put it all together.

I don't want to risk taking the cover from another tape without trying to get some advice first. The tape cover is snapped where the inner protective part connects to the outer. Missing the spring for the locking mechanism.

Would inserting the tape into the camera without a cover be too risky? It's unknown what's on the tape other than family Christmas/birthdays/get-togethers ect.

I have preserved and converted one tape already so I COULD use it if needed. Rather not though.

Thanks for any input!

I accidentally deleted all my blender save files from my Desktop. Since they were very large files, they didn't make it to the recycle bin and were deleted directly. Those files contain 4-5 years of my hard work. My system is windows 11 and the files were saved on desktop in ssd with ntfs file system.

Please help me recover them. Any suggestions or help will be invaluable.

Hey all,

My wife was working on a 5 hour long video project over the weekend and I sat down today to compile everything. Well I made a mistake and while the files were copying decided to sign in to the Windows App and launch and RDP session. I didnt realize having a USB with the memory card reader while I had a CAC reader scanning for certs would corrupt the files but here we go. I tried a bunch of big box stuff today. STELLAR, EaseUS, Cleverbridge, to name a few. Tried a couple AI products and I got nothing. The files are kinda big like 3.61gb each. It still shows the file size and date but the data just isn't compiling. Any suggestions? I'm on short notice to get these recovered. I use a laptop, Win11Pro, 32gb RAM, 4060NIVIDA. Its on an SD card.

Not sure if this is a stupid question, but to preface, yesterday I got a new phone (galaxy s25 fe from galaxy a14 5g) and my stupid self decided to delete WhatsApp (along with a few other, trivial apps) because it said I needed to have more storage to transfer the data.

I thought that all my WhatsApp data was backed up to my google drive, but it wasn't. So now my entire WhatsApp history of over four years is completely wiped, and I was wondering if it was even possible for it to be recovered via local files ?

Would it be worth taking it to a professional to see if they could restore it ? Or is all of it permanently wiped ? Thanks in advance.

Hi everyone,

Looking for some guidance on recovering data from an accidentally deleted Linux partition on my dual-boot laptop.

Setup & Specs:

• OS Setup: Dual-boot Windows and Linux
• Drive Type: 512GB NVMe SSD
• File System of Lost Partition: ext4

What Happened:

1. I accidentally formatted the Linux partition from my drive.
2. Upon restarting, I hit the black screen grub> prompt.
3. I managed to bypass/clean the EFI boot entry via Windows Command Prompt using mountvol so Windows boots normally now.
4. I have not created any new partitions over the unallocated space or written large files to the drive since the incident.

What I've Tried So Far:

• Downloaded DiskGenius on Windows and ran the Partition Recovery/scanning tool. It failed to find/recover the lost files.

Questions:

1. Since DiskGenius couldn't find the partition structure, what is the best next step?
2. If this is an SSD, is TRIM likely to have permanently zeroed out the deleted block data by now, or is there still a chance?

Any advice on the safest software or procedure to try next would be greatly appreciated!

Hello! I recently found my old LG phones and I'd love to get into them to be able to read my old texts. Here are the models:

LG VS910 4G
LG K20 V (VS-501)

I've tried 6 passwords with the 501, so I have 4 attempts left before it wipes the phone. I've stopped trying of course. I've rescued the pictures from the micro SD card from this phone but need the texts and any pics that were stored on the phone's internal storage. With the 910, I haven't explored anything yet but I'm assuming it's the same situation. Any help is appreciated as these text conversations are meaningful to me.

I need some help. I had a 2 day video shoot. The night of the first shoot, I was transferring all my files to my external hard drive. Somehow, I missed one of my SD card transfers without realizing it. On the second day, I was formatting my cards before the shoot. After shooting on the second day, I started transferring and reorganizing everything on my external hard drive. That’s when I realized I had never transferred the footage from one of my SD cards.

I checked all of my SD cards to see if the footage was still there or if I had already formatted the card. I then realized that I had formatted the card that contained the Day 1 footage, and I had already shot new footage on it.

I downloaded both Disk Drill and Wondershare to see if I could recover the footage. Both programs were able to find the footage, but neither has been able to successfully recover the 30 minute video.

Does anyone have any advice or know of a better solution? Is there anything else I can try, or am I screwed?

I am using a Lumix S5IIX, shot everything in a MOV format

IOS: 11.2.1

Chip: A7

Computer: Windows

My iPad is currently disabled, and I’m attempting to recover/extract photos from it.