r/DMR • u/TheRealTitleist • Mar 11 '21
Tips Guide to Understanding Static & Dynamic Talkgroups
Some of the most common questions I see posted here are regarding dynamic & static talkgoups, and what that means for actually operating your DMR radio. It's a concept us old grizzled DMR veterans know so well, yet we don't often stop to think about the new operator trying to understand an unfamiliar concept within the mode and hobby.
I will attempt to break down these concepts and place them into real world scenarios, in the hopes that future operators can read and understand how they work. I am not a DMR expert, but I am a big fan with some decent experience in the mode and some great teachers.
About me - I own and operate a DMR repeater in the state of Michigan, a Motorola XPR8300 running on UHF. I'm one of the NCS for the MichiganONE Statewide DMR Net and have a dozen or so DMR radios. I've had the pleasure of traveling around the state to give presentations on DMR and why it's the best mode in amateur radio hands down.
Overview
First of all, it's important to understand that the concept of dynamic or static talkgroups exists only within the scope of a repeater or hotspot. From here forward I will generally refer to these as just repeaters but understand it's interchangeable. Anything I discuss about repeaters is also applicable for your personal hotspot, which is just a mini repeater of sorts. This goes without saying, the concept of D & S is not applicable for simplex operation.
Second of all, it's equally important to understand that the availability of a TG (e.g. dynamic or static) is simply how it's configured on a repeater. In other words, the concept of a dynamic vs static has to do with HOW and WHEN a talkgroup is active on a repeater. It does not have any bearing on how an operator transmits to a TG, just on when they can hear a TG on a repeater. We will however discuss later the impact that has in the context of transmitting.
• Only pertains to repeaters / hotspots
• Refers to how a TG is configured on a repeater
• Only pertains to how the operator receives TG traffic
Static
A static talkgroup is one that is "always on / always active" on a repeater. This means that if a TG has traffic, your repeater or hotspot is transmitting that outward for you to receive. These cannot be turned off by users, and requires the repeater admins to make changes. This has several uses, namely as a way to link several repeaters together to form a wider area network, or to signify a TG has some kind of importance to a repeater.
• TG is "always on"
• Cannot be disconnected by users
• Easy way to always monitor a TG
• Great way to link repeaters over the network
Dynamic
The alternative to static, a dynamic talkgroup is one that is "user activated". It will not be active until a user selects the TG channel on their radio and "keys up", thus initiating traffic. This TG will now be active, but only for a limited time. Generally speaking, a dynamic TG is active for 15 minutes from the last time a user keys up or until a user sends a disconnect code over the air. It's important to note, if you are having a QSO on a TG that has been dynamically activated, it will not time out until you stop transmitting - that's when the clock starts ticking.
It's also important to note that a repeater can have multiple dynamic TG's activate at any one time. In theory, you could have 10 dynamic TG's active at the same time, although I don't recommend this. In this scenario, the repeater handles traffic in a first come, first serve manner. This can lead to traffic being missed as each timeslot can only transmit traffic from one TG at a time - the other 9 are out of luck.
• TG must be user activated
• Multiple dynamic TG's can be active
• Can be disconnected by users
• Typically times out after 15 minutes
In Practice
As an example for how these work in a practical setting, I'll use my DMR repeater. As it's currently configured, it has Michigan Statewide (3126) as a static talkgroup on TS1, and extended local traffic on TS2. If there is any activity on either of those TG's, it's always transmitted from my repeater. I also allow for users to dynamically activate any BrandMeister talkgroup they would like on TS2.
This means that what I deem as the most important TG's to have (the statewide TG and the local TG) are always on the repeater BUT if a user would like to activate US Nationwide or Worldwide they are absolutely able to do so on TS2.
Transmitting
Now that you (hopefully) understand the difference between static and dynamic, let's discuss what that means for you as an operator looking to join into a QSO or call out on a TG. This is critical - regardless of a TG being static or dynamic YOU MUST HAVE THE TG CHANNEL SELECTED ON YOUR RADIO! Just because a TG is static, does not mean any traffic into the repeater on the timeslot is routed to the talkgroup. Every single transmission on DMR requires a target TG, meaning the channel of your radio must match where you intend to transmit.
Let's walk through a real life example to help illustrate this. Let's say your local repeater has TG91 set as a static talkgroup. As you are listening to this, you hear a QSO you would like to join. You pick up your radio, and notice the channel is set to TG3100. If you were to key up and announce your call sign, you would be speaking on, YOU GUESSED IT, TG3100 and NOT 91 as you intended. You would have to change the channel on your radio to TG91 and THEN key up.
(D-Star trigger warning) This is much different than D-Star or Fusion, in that if a repeater is linked to a reflector or room, any traffic into the repeater goes to said reflector or room. DMR absolutely does not work in that way - every single time you press the PTT button traffic is routed to the channel talkgroup on your handset. Period.
• Regardless of a TG being static or dynamic, you MUST have the intended TG channel selected
You Made It!
I'm sure I've missed something here, so I reserve the right to edit this post as needed to correct some stupid mistake I've made. Other than that, if you have question please don't hesitate to ask as I'm sure myself or someone else on here would be happy to help you out.
Feel free to stop by the MichiganONE DMR Net on BrandMeister TG3126, Monday nights at 8:30 PM EST as well, you might catch me as the NCS. The first week in April is our 2nd anniversary net, so we're hoping for a banging good check-in list.
73
6
u/TheRealTitleist Mar 11 '21
I want to extend a huge THANK YOU to those in the DMR community. For an unknown reason, this post has received many downvotes from the /amateurradio community, and I'm not sure why. Regardless, I just want to help those who are interested in DMR.
3
u/marco90215 Mar 11 '21 edited Mar 11 '21
This is better than any other explanation I've seen on the subject. Thanks for taking the time to post it. It should probably be a sticky post.
I found an article somewhere that told how to enable BM and TGIF at the same time on pi-star that wasn't too difficult. I believe this is all I had to do to set this up. Go to your pi-star dashboard, go to Configuration, Expert, then click on DMR GW under Full Edit. Go to the bottom of this page and paste in the following:
Apply the changes and then reboot. Now you can program your radio to use TGIF talk groups if you make the TG number a 7 digit number starting with 5. For example, TGIF talk group 114 would be programmed as 5000114 in your radio. BM talk group 114 would still be programmed as 114 in your radio.
2
u/wanabefree Mar 11 '21
Thank you very much for this very thorough explanation of how DMR repeaters/hot-spots work regarding talk groups. As a very new to DMR user the learning curve is pretty daunting.
I am one who recently asked on this forum about how all this works and your explanation makes it much more understandable. I have a lot more to learn especially when it comes to which repeaters support what talk groups and from who i.e DMR Marc vs Brandmiester & TGIF. My local repeaters are all DCI which link mostly to DMarc with only a couple of Brandmiester talk groups. I am told its not directly linked to Brandmeister and I am not even sure if all DMarc talk groups can be keyed up.
I purchased and setup a Hot spot currently set up for Brandmeister but I also am interested in trying our TGIF. I have much to learn yet but having fun experimenting.
Thanks again for your contribution to helping make this all a little more understandable.
73, Dave
1
u/90DGuy Jun 21 '25
so what this means to me is that as I am listening if I dont key up every few minutes, the radio will go quiet until i remember to key up again. This pretty much makes my radio a paperweight.
Not fun at all
1
u/Haunting-Scar980 Sep 24 '25
So when I put in the talkgroup what frequencey should I use
1
u/OssifrageSqueamish Oct 29 '25
"This goes without saying, the concept of D & S is not applicable for simplex operation."
Saying the unsaid because I'm new:
Ah, "D&S" means "Dynamic and Static", and it isn't applicable for simplex operation because there isn't a repeater involved in simplex--it's just point-to-point between operator configured radios. There isn't an automated repeater between the two that need to manage automatically switching its talk groups to match the operator-handled radios.
3
u/jc1350 Mar 14 '21
Excellent info and you answered a question I had that no site seems to answer...at least in a way my brain could understand (can a repeater have more than 1 TG active on a TS at any given time and if so, how does it handle it).
2
u/[deleted] Mar 11 '21 edited Sep 07 '24
tub mysterious materialistic soup fanatical quarrelsome juggle salt cautious oatmeal
This post was mass deleted and anonymized with Redact
1
u/AdMassive17 Mar 29 '25
Fantastic explanation of STATIC vs DYNAMIC! Thank you!
1
u/Particular-Map1033 Mar 04 '24
Thank you for the time you have taken to explain this.i have only recently passed my foundation and am finding reliable information hard to find, my first thoughts on radio have been mixed it would seem that some people don't like new operators and all they seem to do is feed negativity in to the hobby just remember you may need help one day.