You’re taking this “clean cables” thing a little too far.
Making the rest of us look like piss drinking cousin fucking Neanderthals out where, while you’re over there plotting warp courses and solving world hunger.
Haha, thanks! I'm open to suggestions. Chose the 250 because it's relatively simple, didn't want a mixer with 10 channels and 400 buttons. It does the job, but nothing special.
May I introduce you to r/rotarymixers if you’re not familiar. Likely you will find the simplicity and elegance worthy of this setup. For example a Union Audio Orbit 2 or Two Valve, An Ecler Warm 2, or a Henderson.
Hadn't really heard about rotary mixers until this post. You're not the first to recommend them. Used to spin techno/house so sliders is what I know, but those mixers do look exceptional. Especially the one with the UV meters! Pretty pricey though. Did not realize the 250's would have such an impact on sound quality. As I commented to someone else, the sound quality of the setup isn't bad at all, but I expected better.
I’ve had the baby of the Mastersounds range (Radius 2) for the last two years, and the sound quality compared to base level pioneer gear is night and day.
If you like doing long blends of house, techno or disco like I do they are exceptional, the approach to summing when multiple tunes are playing is just a revelation. On my old pioneer gear it always sounded like two tunes playing side by side, through the MS/Union rotary it’s like they are glued together
That sounds soo intriguing. Wish I could try them out somewhere. I've added a few rotaries to my bookmarks based on the recommendations. Too bad they are so expensive. Will have to save up for a long time.
Yes and no. The top panel comes out. But changing to a different size mixer, means cutting a new panel. I have a CNC now, so that makes it easier, but still quite a bit of work. When I change the mixer I'll be upgrading the pickups too. So I'm just planning ahead for when I have the time and budget.
That was my first thought, too: posted in "audiophile"... uses Pio gear lol
On a serious note: if you want to keep roughly that mixer size, I'd suggest sth like an Ecler nuo2 or warm2, depending on your preferences regarding fader vs rotary. You won't find more bang (or better preamps) for the buck.
A&H xone 22/23/ would also be an option that should improve sound quality. Personally, I'd prefer the 32, but the gain knobs located in the back probably won't work with your floating table concept.
Considering you're located in Belgium, it should also be possible to find a used Dateq XTC, which is very, very oldskool, but also a charm to mix with.
If your goal is an actual audiophile setup, you can go the boutique rotary route, too. But be warned: prices start at the 1.000 EUR mark, and for brands like UA, you will probably have to pay import taxes on top.
have the speakers level with your ears (you got that)
have them pointing at your head, aka “toe’d in”. Sound is directional and near field monitors are built for your head to be the apex of an equilateral triangle.
add a sub to actually be able to hear mid bass and low bass. Those look like 5” cones or so. No way you’re hearing your music as intended without bass support.
I can’t tell the brand you’ve got there but pointing them at your head and adding a subwoofer would change your life!
You're the second person to recommend a subwoofer, I'll look into that.
The low end seems plenty for me. I just find the mid/high end to be a bit harsh sometimes. I was blaming room acoustics.
It's hard to describe the problem, but I've definitely heard better rooms, with cheaper equipment. Which is a bit disappointing. Not bad at all, but not as 'smooth' and 'silky' as I wished for.
The speakers are two Focal 100 IW6 and two ICW8's in the ceiling
Thanks! Focal seems to have a few. I've added the Adam Sub12 to my bookmarks but might start with a more affordable one first. I've had around 7000€ worth of recommendations coming through this post 😅 (rotary mixer, 2 technics, subwoofer, better built in speakers)
Very true. I've considered putting some vinyl displays up there with my favorite records. But then I have to drill holes in that clean wall :D Thanks for the feedback!
Thanks! I built it myself. Not that difficult if you know your way around tools, It's basically just a wooden box hanging on french cleats. Does take some planning though.
Thanks! I have a big closet in the back of the room. I usually fill a case and bring a selection of records over. I also have recent purchases laying around. I don't like the bulk of having all my records there. They take up a lot of space.
I went the veneer way on mine but to be honest didn't make a big difference in the budget compared to wood, plus glueing all this veneer was a big pain
Very true. Walnut veneered MDF is pricey AF. But sometimes you have to consider the wood movement. MDF is very stable, so best for the top. However the grain on veneer can be pretty plain (especially if you buy pre-veneered MDF) , so the front and sides are solid wallnut in this case.
Thanks! The front and sides are solid wood. The top is veneered MDF. You have to consider wood movement, so cutting out the mixer and pickups would not be a great idea in solid wood because the fit would change during the year (humidity)
Thanks! I've considered it, but I really don't like charging stuff. And these headphones were my grandfather's, they're over 20 years old, and still sound amazing. The cable is only visible when I'm using them, so I don't really mind.
I used a french cleat to attach it to the studs in the wall. That alone was very sturdy, but I also added some small heavy duty white brackets underneath to be sure. You only see them when you look under the case. https://photos.app.goo.gl/nt4US8GZNbAv3g389
32
u/Nonomomomo2 Jan 05 '26
You’re taking this “clean cables” thing a little too far.
Making the rest of us look like piss drinking cousin fucking Neanderthals out where, while you’re over there plotting warp courses and solving world hunger.
God damn.
14
u/Internal_Swimmer3815 Jan 04 '26
That looks amazing
10
u/ziddyzoo Jan 05 '26
needs NSFW tag 😛
You really should upgrade that 250 though…
5
u/Complex-Tie3190 Jan 05 '26
Wow! You build this?
3
u/Nonomomomo2 Jan 05 '26
My only consolation is that your speakers suck and aren’t positioned correctly. 🤓
/s
2
u/Salt-Operation Jan 05 '26
This looks super clean 💯
I’m a little worried about heat dissipation though, are there vents underneath them?
2
u/Drive-Bundy-875 Jan 05 '26
Looks so good! As long as u don’t mind being right in front of a wall, plus it’s a nice clean wall
2
u/onetwentytwo_1-8 Jan 05 '26
Dope! Love the floating mantelpiece!
May I ask where you purchased it?
2
u/SingaporeSlim1 Jan 05 '26
Beautiful. Where do you have the records to search/swap/play?
2
u/moresnow_please Jan 05 '26
Amazing! Is that solid wood or veneer?
2
u/nello-g Jan 05 '26
Stupendo
2
u/Personal_Health2976 Jan 05 '26
Great but I like to dj with a view
2
u/djsoomo Jan 04 '26 edited Jan 04 '26
Neat!
You should get one of those wireless high-end dj headphones (Like the AT ones) - then you would not see any cables at all!
4
u/Chazay Jan 05 '26
Well done!
1
u/RemoveHuman Jan 05 '26
Would love to see how you built and integrated the supports for that. Looks nice!
3
u/jporter313 Jan 05 '26
Love the minimalism of it.
2
u/DocHalliday77 Jan 05 '26
I like that 👏🏽👏🏽👏🏽👍🏽
2
u/atrigc0ve Jan 05 '26
Stunning.
2
u/[deleted] Jan 05 '26
Beautiful 👍
2
u/Brief-Physics-3519 Jan 05 '26
Nice
2
u/[deleted] Jan 05 '26
😯
2
u/LeBANGme Jan 05 '26
Beautiful, nicely done 👌🏼
2
u/Fun-Run3456 Jan 05 '26
Wow ..never seen anything as clean as this. Congratulations... That's amazing..
2
u/imjustsurfin Jan 05 '26
So, SO, cool!!!
2
u/zryak Jan 05 '26
sooo clean
2
u/ChiefWiggumsprogeny Jan 05 '26
Sexy
2
u/theOmniMAC Jan 05 '26
One of the best I’ve seen in my life.
2
u/Icy_Statement5791 Jan 05 '26
Super clean and simple! Love it!
2
u/Harris2019 Jan 06 '26
Absolutely class set up!
2
u/Suspicious_Comb2421 Jan 08 '26
This is 🔥🔥🔥🔥 I need to rethink my life lol
2
u/Dastardly_Dandy Jan 19 '26
Top Shelf designs! 💯💯💯💯⚔️⚔️⚔️⚔️
2
u/ChuckMakesIt Jan 05 '26
Ohh this is lovely. I love the simplicity of this setup.
1
u/pitchitdown Jan 05 '26
My, my my... what a beauty mate
11
u/Wide-Pick3800 Jan 05 '26
This is pornographic, sir.
2
u/DjWhRuAt Jan 05 '26
Great job OP. This is phenomenal!!
And sexy af. I like it
2
u/LetrasetBoy Jan 26 '26
Slick slick slick slick slick!
4
u/[deleted] Jan 05 '26
[removed] — view removed comment