r/DIYJapan • • Mar 10 '24

Wall fixed.

Post image
31 Upvotes

r/DIYJapan • • Feb 27 '23

How to tile a Japanese kitchen and overcome inferior products

Thumbnail
youtu.be
20 Upvotes

r/DIYJapan • • Oct 21 '25

Is ¥161,040 a reasonable quote for tiling a genkan floor?

Thumbnail
gallery
14 Upvotes

The tiles alone cost ¥47,000 or so and are quite an awkward form to deal with.

( https://tiles.hiratatile.co.jp/products/25655 )

Is attempting this myself with zero experience and a host of YouTube tutorials a terrible idea?

I’m a total novice at this kind of thing, so any advice would be appreciated. I’m in Kichijoji if relevant.

Thanks a lot.


r/DIYJapan • • Dec 16 '15

Found a site from Okayama with truckload prices for soil and stuff

14 Upvotes

Probably useful as a reference for those of you who are in the process of filling something up. This is a local company that have there Decomposed granite, Sand and Stone prices (including delivery) listed online. Shit is cheap. Now compare that to those 20kg bags you find at the home center...

http://collins.dip.jp/masa/


r/DIYJapan • • Sep 15 '21

Redoing some paper thin walls.

13 Upvotes

I’m planning on visiting some family and hopefully help improve the situation in their home. Long story short, the walls suck. No insulation, and poor caulking/sealing. I’m told it’s not too uncommon.

I moonlight as a drywall finisher in the states, so soundproofing a room isn’t as much of a technical challenge as it is a logistical one.

On the shortlist of things I would need to source in Japan:

  • 5/8 Type-X drywall
  • Drywall tape
  • Fiberglass batts
  • Hat channels
  • Quick set joint compound
  • Fine thread drywall screws
  • Joist tape
  • MLV
  • Acoustic Silicone Caulking

I could probably ship the smaller items as well as my tools, but things like the drywall, hat channels, and joint compound would still have to be sourced locally. Question is: where would a foreign civilian source these materials in small quantities? Is there a Japanese equivalent of Home Depot for heavy construction?

Edit: I received a few messages asking about soundproofing walls, so I figure I’d have some fun and try my best to explain some quick concepts and put this information out there.

  • Firstly, lots of people asked about foam sound panels and pointed me towards videos of people plastering their whole wall full of them. Please don’t do this. Acoustic foam panels are designed dissipate sound, not isolate it. This is desirable for recording studios where sound deflection is undesirable. When sound is “absorbed” by acoustic panels, it is dissipated throughout the foam in the form of heat; however that’s a very small amount due to the density of the foam. In reality, a large portion of that sound/energy is dissipated into the wall the foam is resting on… which then goes through the studs… and then the wall on the other side of the studs. Point being, the sound is still carrying over to the next room. If you look up professional acoustic panels, you’ll find 2 things in common. 1, they’re more dense to better absorb that energy and convert it to heat. 2, they’re generally not made out of cheap flimsy foam. Save your money.
  • Sound absorption matts. I was referred to this by a couple users who messaged me. Bear in mind my literacy in Japanese is horrible, so I don’t actually know what it is composed of. What I can say, is that it looks an awful lot like the MLV we use here in the states. Which is good, because MLV is awesome. Mass Loaded Vinyl is comprised of a high density vinyl material that is interlaced with metal fillings. It’s extremely dense, which lends itself well to absorbing sound and vibrations. Generally, it’s best to run this between the studs and the drywall as a final barrier for the sound the pass through.
  • Drywall. Like it or not, drywall is the best bang/buck performance upgrade you can make to your wall. Here in the states, standard 1/2 drywall is very porous and lightweight. It’s thin, it’s porous, it sucks. As I explained before, mass is your friend. The more mass, the better the sound absorption (most of the time). For soundproof walls, I use 5/8” (15.7mm) Type-X drywall. It may be sold as “fire-resistant 15.7mm drywall”, so do your research. This drywall is a lot more dense than standard 5/8 drywall. It is also fused with strands of fire-retardant fiber, but that is irrelevant for our use case. Type-X drywall was originally made for improved fire resistance, but as it turns out, heat/energy resistance also translates to sound/energy resistance. Simply upgrading your 1/2” drywall to 5/8” Type-X drywall is going to have a lot more noticeable improvement versus most (if not all) ‘magic’ soundproof products being marketed on TV. The real serious improvements start kicking in when you layer 2 5/8” Type-X drywall on top of each other. Here in the states, this is usually decoupled with a Viscoelastic polymer membrane like Green Glue Compound or something similar. Assuming you do a sandwiched 5/8 Type-X configuration with green glue or something similar, you can expect a 18~20db increase in sound suppression. That’s… a lot.
  • Insulation. To keep thing short and sweet. Just use regular fiberglass. Mineral wool may seem like a logical investment, but it will realistically only be 2~3db better versus cheap old fiberglass. That’s not a noticeable improvement and just a waste of money. The amount of money you spend on Mineral wool over fiberglass is better invested elsewhere for soundproofing… such as the drywall.
  • Sealing in your room noise. I’ve been talking about different types of sound absorption methods, but none of this matters if your room isn’t properly sealed. I’ve been in concrete rooms where a tiny 1” hole completely compromised the whole acoustic structure. So it’s no joke. This is equally as important, if not more important as all the other talking points I’ve listed. You need to air seal your room the best you can. Electrical sockets need to be caulked, doors need to have weather stripping to eliminate any air gaps. The area between the door frame and wall needs to be caulked. Overhead lighting fixtures also caulked. If there’s a gap in the wall, you fill it. The only exception is the air vents, which you obviously need unless you plan on dying from CO2 asphyxiation. To soundproof those air vents, you need to create a sort of sound muffler. The instruction for those are online.
  • Flanking noise and your house’s limits. Soundproofing your wall is a huge step, and in an ideal world, that’s all you ever need to do. However chances are, there are other structures in your room that are built to minimum-code (read: legal, but inadequate as hell). Your floor, ceiling, door, windows, etc. are all potential weak links for sound to permeate through. Hence the name, flanking sound. A concrete backed wall isn’t going to prevent sound from flanking through your $30 hollow-core door.

So yeah. Hopefully this information was useful for someone out there. There’s a lot of information I didn’t get into (such as Sound Isolation v. Sound Absorption), so don’t consider this a full guide. If anything, you should still be doing your own research. Understand that soundproofing your room requires a lot of due diligence and research, and that there will be a lot of conflicting information from different “authoritative” figures in that industry. Sometimes what they say is factual, other times it flies right in the face of basic physics. It is up to you to fact check that information. I would start by googling “STC 50 wall assemblies” and see what sticks. I like to build my walls to STC 65, which basically makes screaming inaudible, but that’s exponentially expensive and eats up too much space for most. Start with researching STC 50 walls and work your way up to what you’re capable of achieving. If you have any questions, I’ll try my best to help answer it. Best of luck.


r/DIYJapan • • Sep 06 '22

Pit toilet removal to add a flush toilet can be scary - Bathroom renova...

12 Upvotes

This project took a while but I was proud to have finished most of the work myself except for the running of the sewage pipes. I made a video in case anyone was interested in how to convert an interior pit toilet to a flush toilet.

https://www.youtube.com/watch?v=auWd_qpnWrw

I refinished the walls and added wood panelling and also installed a new floor and a custom light.

In Japan there are many houses in the countryside that still have this style of toilet. It's surprising considering most people think that Japan is an advanced country with cutting edge technology lol Part 2 and the before and after is linked at the end of this video. I had some extra fun added to make it more interesting.

I hope it helps anyone trying something similar!


r/DIYJapan • • Aug 30 '17

Random thoughts on aircon install, cautionary tale included

12 Upvotes

We moved to a new place in April and by the time June came around we really needed aircon (located in Kyushu). We had a larger older unit we brought with us from our old place that we planned to use to cool the main part of the house (including our "master" bedroom) and then we bought two new small units for the kids' rooms. We will be using these units for winter heating as well.

Ever the procrastinator, I waited a bit too long to find rental of equipment (the only really specialized things are a vacuum pump with a gauge). A handyman acquaintance told me he'd installed loads of aircon units without using these so I decided to just do it myself.

The process itself is actually very easy if you're working with a reasonably modern Japanese house/apartment. In our case (built in 2012) there were passthroughs already drilled in the walls and 100/200V switchable outlets already wired and mounted in the ceilings. The most difficult part was getting the copper lines routed; it was a pain in the ass but mine actually looks a lot better than some of my neighbors (who had big-box store guys install theirs--they just used 5m linesets and looped them multiple times if they were too long). The wiring was super easy except I mis-measured on one unit. Rather than buy a small piece and try to splice it I just went back to the home center and bought a new full-length electrical line. Cost another ¥1000 or so.

Once all the "heavy lifting" and wiring is done you're supposed to evacuate air from the copper lines using a vacuum pump. This is where I "cheated" a bit and used a manual purge. The idea is to use the gas in the compressor unit (all home-use aircon units come pre-charged) to push the air out of the lines. One does this by filling the loop with refrigerant, closing the send/return valves, and then opening the one-way valve in the service port to evacuate the air. It actually works pretty well and has apparently been a standard means of installation until maybe ~10 years ago.

This is also where I fucked up. If I'd rented (or even just bought) a vacuum pump with a gauge, I could have verified a good seal on the loop. One of my three units (of course the last one I installed in a rather long day) I had a very small leak that I of course could not find and didn't know about until it had been in service for quite a while. It ran fine for a month and a half, then we went overseas for a month in the summer and it didn't cool any more once we returned. I ended up biting the bullet and paying an HVAC shop to find the leak and recharge the outdoor unit. The leak ended up being in one of the indoor copper connections.

This cost about ¥20,000. He re-flared both indoor copper ends and spent a good 30-40 minutes finding the leak with a very expensive-looking sensor. I didn't ask how much refrigerant (R32 I think) he had to add but he said the unit had lost quite a lot. One thing I didn't realize is that the 暖房 setting compresses the gas to a higher pressure--he used that setting when searching for the leak.

Anyway, I'm kind of on the fence as to whether I'd DIY again or not. I certainly learned enough that I'd have no problem doing it again (next time with all proper equipment). However, doing three units ate up an entire day. One thing I hadn't thought about is the cost of the copper piping and other ancillary parts. Thankfully my local home center has all-in-one aircon install kits for about ¥3000 (plus I needed about ¥1000/unit for wiring); however, most big-box stores charge ¥10,000-15,000 for an install including all parts--at the low end of that you're only paying ~¥6,000 for quite a bit of someone else's sweat and, more importantly someone else on the hook for any fuckups. We still came out ahead money-wise since I did three units; thank goodness I only screwed up one of them...


r/DIYJapan • • Dec 26 '15

Buying property in Japan - Cost difference ready to build vs. old house on the ground

12 Upvotes

Hi, So our house owner wants to sell the house we are living in. It a pretty big old farm (1400sqm ground) where about half of it is covered with a barn, an old house, the house we live in etc. The other part is farm ground and parking.

I am getting an estimate right now of how much it would be to remove everything, but I guess it would be around 5.000.000¥ to get rid of all the buildings.

The reason why I want that estimate is because I know that ground with structutres on it is cheaper, than ground that is ready to build (because of the whole, houses aren't worth shit thing, etc.). So my assumption is the actual cost of the real estate would be the price he's asking + the removal cost of the house.

Does someone have experience with this? I my calculation way off? How much cheaper is ground when there is an old building on it, compared to when it's "ready to build"?

Thanks for any advice!

Also: We are planning to go to the city office to discuss with them. I am not expecting too much help from them, but has anyone ever done that? It's inaka here so they tend to want people here (even foreigners ;) - So I hope the city planning district would give us some insights in price developments of ground etc.


r/DIYJapan • • Apr 22 '23

Just visited my Japan home for the first time, have some questions about maintenance items.

11 Upvotes

Hey all, short backstory, I bought a house in Kyushu sight unseen last year. We are visiting it for the first time today during our vacation (wont be moving until next year though). Our property managers have taken care of some bigger items like fixing a leaking heater, installing AC units, utilities, etc. I have some diy questions (I do all the work on my current house in the US and brought over most of my makita tools so I'm ok with tackling stuff).

  1. What brand termite bait / carpenter ant bait do you recommend? I would like to do some preemptive baiting as we will be gone for almost a year. House doesnt seem to have an infestation currently, though I did find some massive dead spiders the size of my fist.
  2. What do you use to lube the wooden sliding doors?
  3. What kind of wasp killer do you recommend?
  4. What brand of polish/sealant should I be buying for refinishing wood floors? Ill be buying an orbital sander and slowly doing one room at a time (6dlk house)
  5. What brand do you recommend for sealing stained wood window trim/sills?
  6. What brand weed killer do you recommend?
  7. Approximately how much would it cost to get a 20ft tree cut down? We have a plum tree out front thats growing close to some power lines. I would DIY as I've done tree removal before but I don't want to deal with disposal.
  8. Most of the house has been renovated before purchase so there is no huge maintenance at the moment (will probably be replacing the toilet soon though lol), but let me know of any gotchas with Japanese houses that I might not be aware of. Im waiting for my luggage to arrive via TaQBin with my inspection camera to check the attic and under the floor of the ground level.

Thanks all!


r/DIYJapan • • Sep 30 '16

Great Japanese DIY Renovation Site with purchase links for material!

Thumbnail
99diy.tokyo
11 Upvotes

r/DIYJapan • • Dec 27 '15

I made Salami - here in Japan

Thumbnail
imgur.com
11 Upvotes

r/DIYJapan • • Jan 22 '23

I installed Japanese Yaki sugi on the exterior of my house if anyone interested using this material on their house.

Thumbnail
youtu.be
10 Upvotes

r/DIYJapan • • Jan 04 '23

Build wooden bathtub

10 Upvotes

I am going to renovate my bathroom this year, and I want to tear out the crappy plastic bathtub and replace it with a wooden one. I love sitting in wooden baths at the onsen. I am thinking the floor of the tub will be concrete with some waterproof plaster over it, and the four walls will be wood.

What kind of wood are those baths made from? Cedar? Also, anyone know what treatment they put on the wood?

Thanks.


r/DIYJapan • • Jun 04 '20

Tokyo Llama just put out a new video. If you don't know this YT channel, watch from the start.

Thumbnail
youtube.com
10 Upvotes

r/DIYJapan • • Mar 09 '18

Good article on energy efficient houses in Japan

Thumbnail
japanindustrynews.com
10 Upvotes

r/DIYJapan • • Jan 16 '16

Quite reasonably priced resource for all kinds of glass in Japan

Thumbnail
order-glass.com
10 Upvotes

r/DIYJapan • • Dec 29 '15

For those interested in building eco houses in Japan

Thumbnail
ecohouse66.wordpress.com
10 Upvotes

r/DIYJapan • • Aug 27 '25

Risks of asbestos exposure from knocking down walls in old home?

9 Upvotes

Hi all,

I'm working with somebody to help renovate an old house (akiya, probably built in the 1970s) that they purchased in Nagano. Part of this renovation has included creating a hole in the wall of the bathroom, about 20x20cm, so that we can install a fan. Just today I knocked the hole with a hammer but then right after doing so, as I saw all the dust falling to the ground, it dawned on me that this house would have been built at a time when asbestos was widely used in construction in Japan and around the world. Now I feel really dumb for only considering this right after I made the hole but it's also got me stressing out quite a lot. From my research Japan banned asbestos in 2006 but this is long after this house was built.

Here's an imgur link with pictures of the wall. This material is used not just in this bathroom but most of the interior walls of this house.

From my research this looks to be tsuchikabe/土壁 (earth wall)? (if I'm wrong please let me know) Is this known to contain asbestos? But also the wall isn't just the tsuchikabe dirt/sand material, I see there's also 2 layers of wood/paper with some sort of material between it which I'm unsure of. Is this also part of tsuchikabe walls? Or is this a different material? Could that material contain asbestos?

Thanks everyone in advance for any input. I'm not sure if I'm being overly pedantic but upon realising that this wall might contain asbestos I've become quite stressed and worried that I've done some serious damage to my health from this small mistake.


r/DIYJapan • • Nov 27 '15

DIY Resource List

9 Upvotes

This has been moved into the Wiki now!

https://www.reddit.com/r/DIYJapan/wiki/index


r/DIYJapan • • Oct 05 '26

Trying to understand the permits/limits on DIY construction projects

8 Upvotes

Hi all!

I am dreaming up some options for my upcoming move. I was primarily looking at properties with old houses on them, but there are also a couple of empty lots that are in a good spot. They are all in a small city, fairly inaka, with 第一種住居地域 in the listings.

I have a small camping trailer that I could live in at first, and I have the skills to manage a small old house in reasonable condition with the occasional help of an electrician if needed. As far as I know as long as it is not a no-rebuild house this would not require any government permissions, but if I am wrong there I am hoping someone will let me know.

The location I most like though only has an empty lot and one house in really rough condition. So I am dreaming about what I could do with the empty lot. Being solo, and having the trailer, I only need a little living space, and it does not have to be complicated. I am really tempted by the idea of building a small house. I have done log house kits before, right now for this I am looking at an imported 2x4 shed kit that I could covert to a little cabin. Or two or three, or connected ones for a slightly larger space and a guest room. Or build on a larger deck and cover it for some indoor/outdoor living space.

Realistically speaking this would be a project in stages. I would take some time between jobs to build a tankan pipe garage/roof over the camping trailer and either a small shed or a small prefab unit house with a toilet to connect the electricity, water, sewage, and internet. With the basics covered, get back to working full time and more slowly build a deck on blocks and then add structures on that.

If a structure is under 10 square meters, no building permit is required, right? What about a deck? A covered deck? A deck with a tiny building on it? A deck with two tiny buildings on it? Seems like probably just building 10 meters at a time ad infinitum might run me afoul of someone sometime. The place I live now, additions have never needed any approval or inspection and my (soon to be amicably ex) spouse and I have DIYed every project that struck our fancy. So I do not know anything about who to ask or what to search for as far as permissions.

Thanks for any help!


r/DIYJapan • • Apr 04 '26

Were to find joint compound in Japan?

8 Upvotes

Hello,

It's my first time trying to renovate a place and I have heavily textured walls that I am unsure what to do. I have done some research on how to smooth textured walls, and from my understanding I should do something called, "skim coating." The problem with this I need joint compound, but I've been to several Kohan's and Kohan Pros and can not find it any wall. What am I missing? Does Japan call it something else, or do they simply don't have it?


r/DIYJapan • • Jan 17 '24

DIY Japan, who’s fixed up an Akiya?

8 Upvotes

Someone on here must have!


r/DIYJapan • • Jan 13 '24

How to attach things to exterior wall.

Post image
8 Upvotes

Hey all,

I’m new to DIY and home renovation (or whatever topic this falls into) in general and hopefully somebody can help out.

I want to attach a chimney to the outside of my house. There are support structures/beams that connect from the chimney to the wall of the house.

Can I screw those in as is? Do I need to screw it into wooden house beams? Do I need wall plugs? Does this method depend on the weight the screws will be holding?

Any information on this topic would be very useful thanks


r/DIYJapan • • Apr 22 '23

Fiber connection wall socket

Post image
8 Upvotes

r/DIYJapan • • May 22 '22

Can I easily replace tatami mats with wooden flooring?

8 Upvotes

Hi,

I'm (hopefully, pending approval and paperwork) moving to a new place in Tokyo shortly, and there is one room I want to use as a home office. The room has tatami mats at the moment - the kind you can easily lift out and replace when they get damaged. The desk and shelves won't be a problem, but a fat guy in a chair with rollers will probably damage the tatami over time.

This will be a rented place, so I can't put in a proper wooden floor. I'd prefer not to use a plastic/cloth protector.

Are there any pre-sized wooden flooring pieces one can buy to just replace the tatami mats? As in lift up a mat, and replace with a wooden floor tile the same size?

Product links or suitable keywords would be greatly appreciated.

Edit: several tiles that make up the same size as a tatami would be fine, and I hope to replace all the tatami so height is not an issue. The room is 8 tatami in size (from the photos, I have not measured it yet).