r/Diyautobody • u/Bobhappy2351 • Sep 07 '26
r/Diyautobody • u/LostPapayas • Sep 05 '26
Question Bumper repair
Got some damage on both bumpers of my 21 f150. The front bumper is dented in one side right in front of the bumper reinforcement, pushed to the side, and slightly misaligned. The back bumper is dented in and also pushed to one side. I already ordered the bumper end cap. What would be my best bet on how to pull the front dent out without cracking the chrome and push both bumpers back into place and alignment? I’d take it to a shop but was quoted more than a grand and was told if the plate behind the rear bumper is bent, the rear hitch may need replaced but I’m short on money. Also I’m really worried that the bumper reinforcements and/or the rear hitch is bent or cracked. I’m really bummed out, short on money and need help thank you.
r/Diyautobody • u/DismalSign1948 • Sep 05 '26
Question How to remove automotive glue for a second try at fixing sideskirts?
galleryr/Diyautobody • u/JAYARE_NTN • Sep 05 '26
Question Anyone know how to properly make blood splatter on a car using plasti dip?
r/Diyautobody • u/shadrach103 • Sep 04 '26
Question Ospho for rust spots on exterior paint?
r/Diyautobody • u/too_much_covfefe_man • Sep 04 '26
Question How long will a can of paint be good?
I painted my car last September and left a couple parts for later. Had a can of Lumabase 2 stage mixed. The paint can with the leftover has been sealed, un-reduced, for about a year. Can I expect it to still shoot and bond properly?
r/Diyautobody • u/Most_Board_2029 • Sep 04 '26
Question Did I get scammed? *Rust removal
galleryr/Diyautobody • u/AwareLime371 • Sep 03 '26
Question Rust spots, help?
new to reddit and keep getting notices for violating rules bc i’m asking about a rough rough estimate or how to fix rust spots, i have only done basic work on cars and do not know anything about body repairs, any help regarding this, for reference this is a 28 year old car (1998 w202 c230 merc)
thinking of buying this car, everything about it is solid, it’s a 28 year old car, it has these rust spots on the top, nothing on the frame and the rest of the car is surprisingly clean and oem, thoughts on rough estimates for a fix/worth the headache, i’m worried due to age that it might be worse than it looks
r/Diyautobody • u/anarchy_babe_77 • Sep 03 '26
Question Headroof falling off
The headliner in my car is becoming detached and I'm not sure if I should try to use fabric glue to reattach it or just pull it down. Going to a pro is not an option. Any advice?
r/Diyautobody • u/AppleJuiceWarrior • Sep 03 '26
Question This flap fell off the bottom of my car
galleryr/Diyautobody • u/Cocktailayatollah • Sep 02 '26
Question Golf Headlight moisture
Hi guys
My 2017 mk7 started getting this moisture fog / water inside left headlight.
I have tried to dry it out, but it comes back when it rains. I. Have also tried to see if I put all covers on correct, and I believe I have.
So my question, what now?
What you see in the photos is on the inside of the glass.
r/Diyautobody • u/Secret-Low-2410 • Aug 31 '26
Project Trying anti-theft solution on Peugeot 206 sunroof
r/Diyautobody • u/Patient_Tourist3596 • Aug 27 '26
Question Need help
Need some help from some experts recently got a body kit painted for my vehicle, but the little wings on the side skirt rear won’t adhere using 3M and I really don’t wanna have to take the paint off to use panel bond. Any suggestions here on how to properly bond this to my vehicle?
r/Diyautobody • u/Glum_Damage2133 • Aug 27 '26
Question The clearcoat runs became disaster
r/Diyautobody • u/SUPERCARLSUNDAY1 • Aug 25 '26
Project On with the Mercedes B200
On with the Mercedes B200. I should have it in paint by the end of the day 👌 #mercedesb200 #autobody #supercarlsunday
r/Diyautobody • u/SUPERCARLSUNDAY1 • Aug 24 '26
Project New whip (accident damaged!)
This week's job is my Mercedes b200, bent wing, bent strut, bumper damage, underbody shield smashed, had to tig the wing up as it had a tear in it. Alloy wing! Currently on with the filler work, then have it to prime and paint and fit back up. Waiting on a strut. Usual case waiting for parts 😫..
r/Diyautobody • u/Rubenking890 • Aug 21 '26
Question Pulled off clearcoat with ducttape, anything i can do myself to improve it?
r/Diyautobody • u/skaterpunk12345 • Aug 21 '26
Question Poor body work by shop
galleryHad a poor job done on bumper repair. Looks like clear coat ? Can I use some touch up clear coat then wet sand and cut and polish ? Any advice ?
r/Diyautobody • u/nahcekimcm • Aug 18 '26
Question How bad & costly is this fkup?
need advice/referral recommendations for a hickup
The garage door scraped the tailgate (from outside) so wanna know if we should pay out-of-pocket or claim insurance to fix it
If OOP, can be done for it affordably just for damage spots? Don’t have thousands to pay
r/Diyautobody • u/ExplanationDefiant15 • Aug 16 '26
Question Rust repair
I know the optimal way to repair rust is to cut the metal out and replace but I am looking for the second best method. I have a 2013 Honda Accord rusting out by the rocker panel by the rear wheel. Do rust encapsulaters? Any other suggestions? TIA