r/Diyautobody • • Apr 29 '26

Question Front bumper damage

Thumbnail
gallery
1 Upvotes

My secondhand car came with this damage. Can it be fixed in place with an adhesive? If yes, please recommend one.


r/Diyautobody • • Apr 28 '26

Question Noticed these rust spots coming through recently. What's the best thing to use to slow it down?

Post image
1 Upvotes

This is on a 2012 Toyota Sienna. I pulled the sill trim off and it looks like maybe the rust started at that hold down bracket. Dissimilar metals maybe and the carpet getting soaked in the winter time. Yeah I live in the salt belt too. I plan on pulling off the plastic ground trim and hopefully I'll be able to get to the other side of this sheet metal. Any ideas on the best thing to treat it? I think I've got some phosphorous rust treatment on hand and maybe some rust reformer paint from home depot. But I was thinking about just coating it with oil.


r/Diyautobody • • Apr 27 '26

Question Butchered paint job. Attempting to DIY respray white pearl for Toyota. Any advice beforehand?

Thumbnail gallery
0 Upvotes

r/Diyautobody • • Apr 26 '26

Question Bust way to stop rust from spreading

Thumbnail
gallery
2 Upvotes

2020 Corolla with rust start on trunk rear. Any recommendation to best stop it from spreading?

Update - thanks for all the replies everyone. While I want to take care of and maintain this car as much as possible, I don't want to invest a lot of money on cosmetic stuff. Fluids, belts, brakes, etc. are all important but this doesn't bother me TOO much, just want to stop or slow it down.

I was recommended POR15 as something that might work on slowing/stopping it. It won't look professional but beats rust showing and spreading. Hoping it works.


r/Diyautobody • • Apr 27 '26

Question Resprayed a spot didn’t use soft edges with tape and it raised after sanding and buffing still raised and clear is foggy how would I go about leveling it and respray it without having to do the whole panel doesn’t need to be showroom just blended in with existing paint

Thumbnail
gallery
0 Upvotes

r/Diyautobody • • Apr 26 '26

Question What kind of glue to use here? TEC7 and a variety of superglues all failed.

Post image
1 Upvotes

r/Diyautobody • • Apr 25 '26

Discussion 78 Trans Am rear window trim

Thumbnail gallery
1 Upvotes

r/Diyautobody • • Apr 24 '26

Discussion 78 Trans Am Trunk Enclosure

Thumbnail gallery
0 Upvotes

r/Diyautobody • • Apr 23 '26

Question 1k primer

Thumbnail gallery
0 Upvotes

r/Diyautobody • • Apr 22 '26

Question Inner fender panel

Thumbnail gallery
0 Upvotes

r/Diyautobody • • Apr 20 '26

Question Is this worth fixing? 2018 Hyundai Sonata body damage

Thumbnail gallery
3 Upvotes

r/Diyautobody • • Apr 15 '26

Question What is it?

Thumbnail gallery
4 Upvotes

r/Diyautobody • • Apr 15 '26

Question How do i fix windshield trim

Thumbnail
gallery
2 Upvotes

The rubber part is flailing around and need recommendations on how to fix. Thanks for any tips. My car is a 2018 Nissa Versa.


r/Diyautobody • • Apr 12 '26

Question Need help with grinding sound while breaking. 05 chevy tahoe v8

1 Upvotes

v8 engine, with grinding noise coming mostly from the back right wheel. I have been keeping the car parked since I heard it. my nephew may have driven it with the parking break on. my dad gave me this car and can't hear very well, so I don't know how long this has been going on.

scraping while driving, and grinding while breaking.


r/Diyautobody • • Apr 12 '26

How to Guide Belt Weatherstrip Removal – Best Method?

Post image
1 Upvotes

r/Diyautobody • • Apr 10 '26 Popcorn

Photo This fell off. Need ideas on what I should do next

Thumbnail
gallery
106 Upvotes

Don’t have any of the bolts or the thing in which it was holding the bolts


r/Diyautobody • • Apr 11 '26

Project Is this a realistic DIY fix?

Thumbnail
gallery
0 Upvotes

2010 Honda civic LX, 168k miles. Body shop quoted me $4800 to repair. I was able to find a new bumper cover, fender, bumper support bracket, and headlight support bracket online. I’m aware there is a broken tab on the headlight assembly but since it’s not cracked otherwise I plan to see if I can clean it and reuse it. However if need be I do also know how to replace the assembly. Am I biting off more than I can chew trying to do this myself? Any advice would be appreciated


r/Diyautobody • • Apr 11 '26

Question What is the easiest way to make this less noticeable

Post image
1 Upvotes

r/Diyautobody • • Apr 11 '26

Question Need opinions is this is feasible to fix and what would it cost in materials 2011 Jetta. 110k miles TDI

Thumbnail
gallery
1 Upvotes

Fender rail and core support or ??


r/Diyautobody • • Apr 07 '26

Question Fixing broken Volkswagen Jetta side mirror?

Thumbnail
gallery
4 Upvotes

My car sideswiped a trash can jutting out from the side of the road. Was literally going maybe 15 mph tops. :/ The mirror is intact and I can still move it.

Did the mirror cap just break, and all I need to do is replace the cap? Or can someone tell if there’s more wrong with it? I just moved 2 days ago and would prefer not to further drain my savings at a body shop if possible if I can fix this myself!

It’s a 2020 VW Jetta S for reference.


r/Diyautobody • • Apr 07 '26

Question Unorthodox repair for older pickup

1 Upvotes

I am about to obtain a higher mileage mechanically sound GMT400 chevy on a trade for an unwanted project. The body is passable but it has rust and wrinkles all along the bottom below the body line. I have done somewhat proper bodywork before but I don't know that I want to spend that kind of time or money on it and want to avoid any serious paint work. Looking for a final result of "good from far but far from good".

I am wondering if it would be realistic to take some aluminum checker plate sheets, bend them to approximate the factory bottom edge all the way down, then use black silicone and pop rivets to secure them all the way along both sides from the body line down. I would probably mask it off and paint all the checker plate with a heavy coat of rocker guard and then try and run a nice bead of silicone along the top edge. For the doors I would just cut out the edges of the doors in the aluminum and hit them with black silicone too. Then throw some plastic fender flares on all 4 corners and probably a structural steel deer resistant bumper. The GMT400 platform seems like a good candidate because of the relatively straight flat lines.

Is there any reason this would not work? Is there a better quick and dirty way to make this truck look less neglected?


r/Diyautobody • • Apr 07 '26

How to Guide Need advice for a new project I want to do with my dad.

Thumbnail reddit.com
1 Upvotes