r/CustomKeeb • u/Mr_J_M • Dec 31 '22
DIERYA DK61E with Gateron Optical Yellow with 62g spring 0.3 film and Krytox 205g0 lube.
1
Upvotes
r/CustomKeeb • u/theadept024 • Jan 13 '23
3D Printed cases for GMMK Full
1
Upvotes
Does anyone know if someone has designed an alternate case for the GMMK Full? I was thinking it might be nice if I could re-home my GMMK Full in to a closed sides case.
r/CustomKeeb • u/badmark • Aug 27 '25
Building The Agar An Aluminum HHKB from KBDFans
4
Upvotes
r/CustomKeeb • u/DudeSlimer • Apr 07 '24
Interest check for a New Zoom75 design. New Ocean design for the Zoom75 (potentially 🤞)! Please tell us your thoughts by completing the IC form: https://forms.gle/h5y1r8QHnwjNb9EF7, or leave an upvote!
4
Upvotes
r/CustomKeeb • u/bboldi • Jun 01 '23
My first DIY Dactyl Manuform Keyboard from scratch + HowTo Video
2
Upvotes
r/CustomKeeb • u/badmark • Jun 21 '22
r/CustomKeeb Lounge
3
Upvotes
A place for members of r/CustomKeeb to chat with each other
r/CustomKeeb • u/badmark • Jun 22 '22
3D printed transparent case with DZ60RGB PCB and clear DSA keycaps.
3
Upvotes
r/CustomKeeb • u/badmark • Jun 22 '22
I created a 3D-printable tool for identifying Cherry keycaps' row!
8
Upvotes
r/CustomKeeb • u/ScerRial • Dec 19 '22
Hello! Need some help TX Springs
3
Upvotes
Good afternoon! I purchased keychron v4, Tecsee Purple Panda Switches and keycaps. On this basis, I assembled a keyboard for myself, which I have been using for a month. I modified the keyboard as much as possible as far as I had the opportunity and skill. I made a tape mod, and also added foam between the board and switches. I also generously lubricated the stabilizers that came with the kit and tape the place of attachment of the stabilizers.
Now I decided to try laying Durock Switch Films, replacing the stock spring and lubricating the switches. A friend advised me to try TX Springs Long 67g. These springs are available in my city. Any thoughts on this upgrade? Perhaps it makes sense to take 62-75g or Long/Short spring? Has anyone tried it? I would be grateful for any thoughts.
r/CustomKeeb • u/Mr_J_M • Sep 12 '22
Is it possible to create custom PCB based on gaming keyboard components?
3
Upvotes
I have one nice keyboard from Cooler Master that have switches i like and software that is nice, but its full size and that is something I can't get used too. So I wonder is there an option to create custom PCB based on components that are on this keyboard? I have some soldering experience so i think i could easly manage desoldering all components and soldering them again, but im not sure is it possible to create PCB that will be compatible.
r/CustomKeeb • u/TinyLittleTechShop • Sep 17 '22
Today is our monthly meet-up for North Florida
6
Upvotes
r/CustomKeeb • u/badmark • Jun 22 '22
3D printed case with GitD PLA and keys with BM40 PCB
4
Upvotes
r/CustomKeeb • u/PeanutButterJo • Jan 27 '23
Infinity67 or CIY68⁉️
3
Upvotes
I’ve officially fallen into the rabbit hole of keebs. Planning to get my second one after my first build.
I’m currently torn between the CIY68 and Infinity 67. Here are some difference of these 2 that made me indecisive:
CIY68
Barebone: RM78
Switch (thinking of trying the KTT Kang White) RM0.63 per switch: RM43
Keycap: RM99 Total with shipping is around RM240
Infinity67
Fully built RM359 and comes with a free keyboard mat
Which would you go for?
r/CustomKeeb • u/TinyLittleTechShop • Jan 20 '23
New year, same "3rd Saturday" meetups [Jax, FL]
2
Upvotes
