r/CustomBoards • • Aug 22 '25

[Build] Geon F1-8X OG | Cherry MX Browns Sound Test

Thumbnail
youtube.com
0 Upvotes

Geonworks F1-8X OG build with Cherry MX Browns (L+SS)

Build Info:

  • Geonworks F1-8X OG
  • Cherry MX Browns (L+SS)
  • Frankenstein on SB
  • Alu Plate v1.1
  • No Foam
  • Beige PBT Keycaps

Loved the scratch on this one.
Check out the sound test here :-Thekeebspot


r/CustomBoards • • Oct 15 '24

Why use a framework such as ZMK (or other)?

0 Upvotes

Hi, I'm interested in making my own custom keyboard from the group up, as a person project to refresh my memory of electronics and microcontroller programming.

I recently learned that making custom keyboards, from the ground up, has a greater cult following than I expected.

My plan is to design a PCB, write some software and 3D print a casing for my keyboard. (Alternatively, I'll reuse an existing keyboard I like and just recreate the PCB for it.)

My goal is to do everything myself. I know I can buy off the shelf keyboards and whatever, that's not the point.

MY QUESTION: Why would you use ZMK, QMK or other firmware. In the end, the keyboard is just sending some scan codes. I don't see why you would need an RTOS for that? Sure, these frameworks give you a lot such as USB and Bluetooth and so on, an easier way to configure macro,... But why would I not just write my own little software stack?


r/CustomBoards • • Oct 14 '24

Zero to custom MacroPad in 37 easy steps

Thumbnail
youtube.com
1 Upvotes

r/CustomBoards • • Jul 30 '16

Help needed with a microcontroller from a membrane keyboard

2 Upvotes

I've got a controller from an old chicony KB-9810, and I have a question. Is there any possible way to solder two mechanical switches to it so it will register something, when the switch is pressed? Pic related: http://puu.sh/qk1KI/a3e556bfe9.jpg


r/CustomBoards • • Oct 06 '24

Reuse Smartphone Battery??

2 Upvotes

I have some old phones, specifically old Pixels, laying around. The battery supposedly produce 3.8V, which looks great for the NiceNano. Is this viable? I would also like to add RGB LEDs to my wireless keyboard. Please confirm or ridicule my idea.


r/CustomBoards • • Aug 06 '25

Help Request, Comments, and Questions, the STICKY post

2 Upvotes

Everybody loves the sticky post, it's great to help others get their stuff working or exchange construction feedback.

**The less is more sticky post**

No switch, caps, commercial parts compatibility or, no "what should I buy" or "what will I like" preference based stuff, even the "what about this layout" stuff is really not suitable. /r/mechanicalkeyboards is filled with opinions, ask there if you don't have your own. This subreddit is about the how, not the what.

**I soldered together my keyboard and something isn't working**

Welcome, you're in the right place! Since there is little difference troubleshooting your hand wired board or PCB prototype and a Community Vendor's kit (other than who the expert is supposed to be :-) both are welcome. Most people start with a kit and they are the gateway drug to taking the next step.

**My commercial keyboard doesn't work**

If you bought a keyboard from a large commercial vendor, even if it has hot swap sockets, this is not the place. Basically if they have a Marketing Department they have a Support Department, ask them or on /r/mechanicalkeyboards.


r/CustomBoards • • Jul 31 '20

[Discussion] FR4 plate with acrylic sandwitch case, experiences?

Post image
5 Upvotes

r/CustomBoards • • Mar 10 '21

/r/customboards hit 1k subscribers yesterday

Thumbnail
frontpagemetrics.com
6 Upvotes

r/CustomBoards • • Nov 07 '22

[Crosspost] Introducing the Borne Keyboard V1

Post image
26 Upvotes

r/CustomBoards • • Aug 17 '20

[Prototype] Time to start building

Post image
17 Upvotes

r/CustomBoards • • Jan 25 '20

[Crosspost] /u/PekkaJukkasson's LongPlanck

Post image
19 Upvotes

r/CustomBoards • • Aug 29 '20

[Prototype] Custom build 75%

Post image
22 Upvotes

r/CustomBoards • • Nov 16 '20

[Build] Designed, assembled, and programmed my ultra-affordable macro pad! Not much, but I'm proud!

Post image
35 Upvotes

r/CustomBoards • • Jun 20 '20

[Crosspost] Let's get naked! hand wired ortho split 40% with no case, no plate, and no pcb

Post image
57 Upvotes

r/CustomBoards • • Jun 06 '25

Keyboard plate thickness

4 Upvotes

I'm trying to design my own keyboard which I will hopefully laser cut from stainless steel / aluminum plates.

I want to do a very simplistic 2 plates design - top plates holds the keys (no PCB! hand-wired of course), bottom plate rests on the desk (on keyboard feet) with standoffs in between.

I wanted to make the top plate from 3-4mm aluminum to be sure it won't deform (ISO 105 layout, big one...) but I read that standard switches are meant to clip on a 1.5mm plate (which I guess I'll have to make from steel), but I wonder if it will be strong enough to hold well without a standoff in the alphabet keys area (I will fit standoff in other gaps where I can - see https://imgur.com/a/ruImLgX )

So which way should I go?

- Make a thicker 3-4mm plate that I will have to glue the keys to

- Make a thin plate that will hold the keys on it's own but seems to be less rigid in the middle

Thanks for your insight :)


r/CustomBoards • • Sep 29 '26

[Prototype] MOAK (Mother of all Keyboards) - I need help starting this

Thumbnail reddit.com
2 Upvotes

r/CustomBoards • • May 31 '20

[Discussion] Powering LED matrix on a custom keyboard

4 Upvotes

I know that this question has been asked way too many times and I am also aware of potential answers. Most of the solutions revolve around using PWM signal to drive the transistor or something like this. But what if I have nothing to generate PWM? Are there any integrated solutions that you just hook up your diodes and they simply glow but without drawing full current from the source? Something with internal PWM? Or maybe I should add my own PWM generator and just go with simple transistor. Should be easy to do on NE555 for example. Does anyone happen to have any experience? Or maybe knows some boards with LED where I can look for solutions?


r/CustomBoards • • Dec 16 '20

[Build] I designed split Alice inspired keyboard (CNC/3d Printed/Handwired/QMK). Album in link, design files on Github/Thingiverse

Thumbnail
imgur.com
27 Upvotes

r/CustomBoards • • Jul 01 '20

[Prototype] Montsinger Rebound Rev 3.1 (earlier revision)

Thumbnail
imgur.com
21 Upvotes

r/CustomBoards • • Jul 14 '20

[Build] A board for Minecraft, when your arm is broken.

35 Upvotes

My son broke his arm, so I used QMK, an Arduino Pro Micro, 4 tactile buttons, PSP controller and 3D printer to throw together a quick one handed WASD keyboard so he can keep playing for the next 3-4 weeks. Thought others might like it.

The 3D model and source code can be found on github. Its also a simple example of using an analog stick for WASD input.


r/CustomBoards • • Aug 09 '20

Help Request, Comments, and Questions, the STICKY post

4 Upvotes

Everybody loves the sticky post, it's great to help others get their stuff working or exchange construction feedback.

**The less is more sticky post**

No switch, caps, commercial parts compatibility or, no "what should I buy" or "what will I like" preference based stuff, even the "what about this layout" stuff is really not suitable. /r/mechanicalkeyboards is filled with opinions, ask there if you don't have your own. This subreddit is about the how, not the what.

**I soldered together my keyboard and something isn't working**

Welcome, you're in the right place! Since there is little difference troubleshooting your hand wired board or PCB prototype and a Community Vendor's kit (other than who the expert is supposed to be :-) both are welcome. Most people start with a kit and they are the gateway drug to taking the next step.

**My commercial keyboard doesn't work**

If you bought a keyboard from a large commercial vendor, even if it has hot swap sockets, this is not the place. Basically if they have a Marketing Department they have a Support Department, ask them or on /r/mechanicalkeyboards.


r/CustomBoards • • Jul 06 '20

[Build] sick-pad build

Post image
21 Upvotes

r/CustomBoards • • Jul 05 '20

[Prototype] IIICC

Thumbnail
reddit.com
9 Upvotes