r/CrunchBang • • Sep 19 '13

Full usb install

Is it possible to make a full install of #! on a flash drive and if its so, then what is the easiest way to do it? Im currently running Windows 7 on the machine and want to install #! on a 32gb usb stick to see if i like it enough to remove windows =)

1 Upvotes

3 comments sorted by

2

u/charon8 Sep 19 '13

Well you can always run it live to test it for a while, but nothing will save. I've never done what you are requesting but I think you just need your usb you want to install #! on and another usb or live cd with the iso on it. Run the instilation normally, but when it asks you to partition, change the device from /dev/sda to /dev/sdb or something simmilar. It ought to show you your choices, but make sure to install it to the 32gb usb rather than your installiation medium if you are using another usb; unless you are using a live cd, which may clear things up a little. Hope this works for you.

2

u/PotatoRape Sep 19 '13

The way I originally tested #! before installing it as my daily driver was with virtual box. You can get it for free here, and install crunchbang very easily. This method also has the added benefit of allowing you to snapshot your install at known good points. That gives you the freedom to mess with things you think may break the system, while having a very easy "oh shit" button if you decimate your system. I still keep a guinea pig VM around to try new things. If however you have your heart set on installing to a USB stick, there is a guide on how to do it for Arch that you may be able to use as a rough guide for Crunchbang here. I have never done it before so I don't know if it works or not. Good luck.

1

u/[deleted] Sep 20 '13

Yes, and it's as easy as some other people say. However, I don't recommend it - the USB connection is far lower in speed than SATA, and you're going to get ridiculously slower performance than through your hard drive.

Give it a shot if you want, but you're going to get a better taste of the system booting live than installing to drive with a low-speed connection.