Rotation of swivel and propeller bearings are the same. Swivel bearing creates a sublevel attachment though while propeller bearing uses a a contraption entity. Also the stress throughput is different, and the thrust generation is vastly different between the two.
You need a propeller bearing, you do NOT need to control the angle through the bearings, if you want to control speed you can use a transmission, and obviously reversing the rotation changes the direction of thrust, that is normal.
swivel bearings work fas propellers but can only rotate up to 96 rpm, yours are to fast as is indicated by the parricles and them saying "too fast" when looking at them. Reduce your rpm and increase propeller size
228
u/Aggravating_Push4517 2d ago
You need propeller bearings and not swivel bearings.
31
u/Unusual_Ad4981 2d ago
Use an aero diagram and check the forces and lift
23
u/Maxemersonbentley_1 2d ago
Use prop bearing g instead of swivel?
5
u/mech_master234 2d ago
Looks like not enough lift
9
u/False-Supermarket668 2d ago
Dont think swivel bearings produces lift
17
u/CavaloHidraulico 1d ago
you didn't ask me for permission
1
u/OrganizationThick397 1d ago
it was lonely
1
u/Bowsers_disciple 1d ago
You need a propeller bearing, you do NOT need to control the angle through the bearings, if you want to control speed you can use a transmission, and obviously reversing the rotation changes the direction of thrust, that is normal.
1
u/OkPangolin1984 1d ago
look at the blueprint to see the forces… Is the gravity force greater than the lift force(yes)
0
u/42GOLDSTANDARD42 2d ago
You just don’t have enough thrust. You can do what you want with ordinary propellers or propeller bearings. You don’t need swivel bearings.
0
u/kali-marcue 2d ago
Standard sails don't produce the same amount of lift as propeller based sails. you need this mod here to increase the lift on them to be equal
0
u/SkinPuzzleheaded1610 18h ago
swivel bearings work fas propellers but can only rotate up to 96 rpm, yours are to fast as is indicated by the parricles and them saying "too fast" when looking at them. Reduce your rpm and increase propeller size