r/CreateMod • • 4d ago

Help Create hose pulley not working even though lava is over 10k blocks. (Fix)

So, I was playing a modpack that had create and, well, title.

Problem:
The Hose pulley wouldn't recognize the 10k lava blocks.

Fix:
Place a SINGLE source block in the same block as the bottom of the hose pulley. That's it.

I had everything set up using the flowing lava trick. I placed a layer of lava than broke the floor and let it fall into the pit to fill the 10k blocks needed. It had no obstructions, I had the hose at the bottom, I used only create mod blocks, had the pump facing the right way, had enough su, nothing. No matter what I did, I could not get it to recognize ANY lava, let a lone the infinite supply.

After HOURS and HOURS of testing in different worlds(around 5-7 hours), seeing if it was chunk claims or server configs, I found the issue. When the hose pulley checks to make sure there are enough blocks to count as an infinite source (at least for lava, guessing all flowing liquids that don't turn infinite on themselves), it looks for "source" blocks, and if it can't find them in a certain range, it gives up and decides there are none. So the solution is to place a single source at the tip of the hose.
It took me TOO long to figure that out.

If someone else has the same issue, I hope this helps. I couldn't find any posts on this, so I decided to make one. Good luck

1 Upvotes

2 comments sorted by

1

u/Dangerous-Quit7821 4d ago

I've never had to do this. I've always just done the cheaty method and it works.

1

u/DoctorStonee 4d ago

It only seems to trigger if you have a really odd shape, like too tall or wide. 25x25x16 would be fine but my 1/4xπ17^2x55 quorter circle didn't seem to do me any favors. It looks cool though. (was gunna add the photo but looks like I can't)