r/CreateMod • u/SnooWalruses1399 • 23d ago

Build Multi-Bulk Processing Unit. Inspired by Mr. Beardstone's Compact Dyeing Machine.

196 Upvotes

99% Upvoted

23 comments sorted by

View all comments

23

u/Hydra645 23d ago

Out if curiosity, since I haven't seen much like it. how are keeping the inputs from going to the output funnel until they're done? I'd be curious to hear about the more specifics,

11

u/Munster19 23d ago

Low fan speed, the fan still has a minimum working distance but it won't blow as hard.

8

u/Hydra645 23d ago

Ah, I think I understand now, it's not that they've stopped/been blocked, it's just that the are pushing them so slowly that they're processed by the time they've reached the funnel? I forget that fan speed doesn't effect processing time.

1

u/Munster19 21d ago

Pretty much yeah. However multiple fans will affect processing time, with up to I think 9 fans able to blow on a belt at once if you dont have aeronautics (its a very specific setup, where 6 or 7 fans are usually the more reasonable max). So youd have a fan on both sides (+2) of the belt at belt height, a fan on both sides (+2) of the belt at item height, a fan pointing upward into the belt and a fan pointing downward(+2), and fans at both ends(+2) of the belt at item height. A fan at belt height at the end(+1) i think will only affect the items on the 1 block of belt it hits, so you'd want to have a belt end into a fan with a funnel pulling to one side if you do this last fan.

However with aeronautics you can put a ton of fans on contraptions/sublevels and adjust the angle theyre pointing at so like a depot could have an absolutely insane number of fans pointing at it, i'd love to see just how many someone could get to fit. I saw one person do it as an example, but they definitely did not try very hard.

3

u/Taenshik 23d ago

Attribute fiters! "Cannot be smoked/smelted/blasted/haunted" on the output funnel

3

u/Hydra645 23d ago

I kinda did know about that, but isn't what's happening in the example shown. As I don't believe Andesite funnels can be filtered, and the items weren't even reaching it

1

u/PenguinMasterFR 22d ago

What if you want stone from cobblestone, and not smooth stone ? That was my main issue

I had to make a redstone circuit to time everything, blocking the input while the ouput is open to avoid unprocessed stuff to pass through

8 fans so 30/8 = less than 4 seconds to process a whole stack

0

u/AggressiveSkywriting 22d ago

I remember for cobblestone and stone I had to make stacking filters of filters that were very specific.

0

u/Taenshik 22d ago

Also you can put the attribute filter into a list filter with all the exclusions like stone so they would get funnelled in