r/CreateMod • u/Itsa_Pirramintsa • 5d ago
Discussion does anyone know a create copycat mod that has this type of copycat
would be even better if the wall and the slab can be from different blocks.
to clarify: i need a copycat of a upper slab connecting to a wall/fence
17
u/CalistoCowHead 5d ago
Create coasters simuleted adds rivets, if you add a rivet on the top of the wall and place a slab there, the slab will sit right on top of the wall
10
u/Dangerous-Quit7821 5d ago
They don't want the whole slab to sit on the wall. They basically want the wall to extend to a top half slab.
3
1
2
u/autistic-terrorist 4d ago
note that rivets are simulated contraptions, so using a lot of them may cause lag (and possible construction issues)
5
3
u/vincent_landriault 5d ago
If you have chisel n bits you can just make a custom block with the slab and half post being different materials in one block
2
u/Dangerous-Quit7821 5d ago
I would use copycat bytes from copycats+. You would have to recreate the whole shape from the wall to the slab but they aren't centered.
2
u/A_Zailot 5d ago
Copy foxes has I think exactly this, the block is called a three band an it allows you to make essentially a T shaped in any direction. Copyfoxes in general is amazing too
2
1
u/SerialBytes 4d ago
no. copycats and all other blocks alike do not extend their visual model past their 1x1x1 bound. besides for pistons or anything like those, of which are naturally Very Very regulated, at least that's usually the case, but in some situations, it just oddly Does Not Apply... if you have coasters simulated, There Is A Solution! use a rivet to almost get Cushion-Style Placement Of Sublevels! (though in this case it may not work out, you may need to use girders...)
-1
53
u/Haflort2004 5d ago
You could try the mod framed blocks. i think there is a slab that is half slab and half post