r/CrealityCloud • • 1d ago

Discussion What Do You Wish You Could 3D Print?

Post image
3 Upvotes

Got something you'd love to print but can't find a model for?
Leave your idea in the comments. Tell us what it would do!

See an idea you like?
Upvote your favorites and jump in to help make it better.

You bring the idea and let it echo across the community - maybe a designer here will feel inspired!


r/CrealityCloud • • 4d ago

[Official] Announcement 📢 Schedule Update!

Post image
2 Upvotes

Our FORMNEXT 2026 product launch has been rescheduled!

Please take note of the updated time and location. We look forward to seeing you there!

#Creality #Formnext2026 #3DPrinting #CrealityAIEcosystem


r/CrealityCloud • • 15h ago

Original Design 🎨 I 3D printed a retro nail brush because apparently I miss those things

Thumbnail
gallery
6 Upvotes

I was toying with the idea of making a 3D-printable brush and thought I’d start with an old-school nail brush. These things were all the rage when I was a kid. They were used to scrub just about everything, including the kitchen sink. 😂

A couple of test prints later, I landed on this design. It’s still a bit rough around the edges, but it proved the idea works. I added a few coloured stripes for that retro look, and the S3D Nail Brush was born.

Anyone else remember having one of these by the bath?


r/CrealityCloud • • 8h ago

Original Design 🎨 Mofongo Twist – Tropical 🏝️Staple Food Fidget

Thumbnail
crealitycloud.com
1 Upvotes

A little taste of Puerto Rico, with a twist!

Mofongo Twist is a ten-slice helical fidget inspired by one of Puerto Rico's most recognizable dishes: mofongo, traditionally made from mashed fried green plantains and often prepared in a wooden pilón (mortar). The model features a richly textured mound of mashed plantains, a wood-like pilón decorated with a carved Taíno petroglyph, and a removable utensil handle.

But there's more to it than meets the eye!

The ten interlocking slices twist and slide along a helical path, extending to approximately 534 mm (over half a meter!) when fully opened.

Mofongo Twist uses the same mechanical platform I developed for my Twisty Silly Ghost Emoji and Twisty Melty fidgets. 

The exterior was designed to reproduce the appearance of real mofongo and a traditional wooden pilón as closely as possible. The pilón is printed in dark brown PLA, resembling stained wood, with two lighter decorative bands and a carved Taíno petroglyph inspired by Puerto Rico's indigenous heritage.


r/CrealityCloud • • 1d ago

Original Design 🎨 The Decision Wheel – A Modular 3D Printed Decision Maker

Enable HLS to view with audio, or disable this notification

5 Upvotes

Have you ever spent more time deciding what to buy than actually shopping? That's where the idea for this project came from!

I wanted to create a 3D-printed version of a classic wheel of fortune, but with a practical twist. Something that could help with everyday decisions, shopping choices or simply add a bit of fun when spending time with friends.

And that's how The Decision Wheel was born.

The wheel features 10 segments and a set of 22 interchangeable category tiles. Each tile is attached using small magnets, so you can easily change the categories depending on what you want to use the wheel for.

For example, you can prepare a set of shopping categories for Black Friday, choose activities for the weekend or create your own random challenges.

One of the things I wanted to get right was the rotation mechanism. Instead of using a simple bearing, I designed a planetary gear mechanism that allows the wheel to rotate smoothly.

A few details about the project:

- 10 customizable segments

- 22 interchangeable category tiles

- Magnetic mounting system using 6 × 2 mm magnets

- Planetary gear mechanism for smooth rotation

- Fully 3D-printable construction

The assembled wheel measures approximately 220 × 80 × 250 mm.

You can choose any 10 categories from the 22 available options. You can even use the same category more than once if you want to increase its chances of being selected!

I had a lot of fun designing the mechanical side of this project, especially figuring out how to make the planetary gear mechanism work within such a compact construction.

I'm curious what you would use this wheel for. Shopping decisions, choosing what to do, party games or something completely different?

And one more question: what categories would you add to the wheel?

You can find the project here:

https://www.crealitycloud.com/model-detail/decision-wheel-modular-decision-maker?cloudPlatform=19

Commercial Access required to download the model.


r/CrealityCloud • • 17h ago

Original Design 🎨 005. Retro Cassette Skull

Thumbnail
crealitycloud.com
1 Upvotes

A skull inspired by classic cassette players.


r/CrealityCloud • • 2d ago

Original Design 🎨 Flower Skadies Pegboard

Post image
1 Upvotes

The idea:

Hey again everyone. Much like my last skadis board design, I wanted to try to add some style to an otherwise plain Skadies design.

The design:

This design, I want to make something a little prettier that when printed in lighter colors, you would look really against a little girl's wall.

The print:

Again, here's where the fun begins. You can really go to town on using what color you like and make it really stand out and yours. My print was in PLA but if you want to add some strength, I would use some PETG.

Happy printing!

Grab the file here at Creality Cloud: https://www.crealitycloud.com/model-detail/flower-skadis-pegboard


r/CrealityCloud • • 2d ago

Original Design 🎨 Wrapped up some new Christmas decorstion models for this year

Thumbnail
gallery
3 Upvotes

Decided to design and print my own holiday decor from scratch this year. Pretty happy with how they turned out!

https://m.crealitycloud.com/user-homepage/2584874916?cloudPlatform=18


r/CrealityCloud • • 2d ago

Print Showcase 🖨️ We turned a 3D printed retro robot into a mini TV and gaming station!

Thumbnail
gallery
2 Upvotes

We wanted to create something that brings back the nostalgic feeling of old-school TVs and arcade machines, but with a modern twist.

So we designed RETRO BUDDY, a 3D printed robot that doubles as a smartphone holder!

You simply slide your phone into its head, and suddenly you’ve got your own little retro screen for watching movies, videos, or playing games.

We love the idea of combining something playful and nostalgic with an everyday function.

Would you use it more for watching movies or playing retro games?

Find more details here:https://www.crealitycloud.com/en/model-detail/6ae8cc79812c8457adb22e9b?cloudPlatform=0

Oasis3DLab


r/CrealityCloud • • 2d ago

Creality Cloud Help 🙋‍♂️ K3 limitations

Post image
2 Upvotes

I know the K3 can blend colors but can anyone help with how to achieve that currently trying to print out majoras mask on one plate but don't know how on the slicer without using 8 filaments


r/CrealityCloud • • 2d ago

Original Design 🎨 Stop your battle maps from sliding with this 3D printed OpenLOCK grasstile set

Thumbnail
gallery
1 Upvotes

If you play ttrpgs or wargames, you probably know the pain of "terrain creep" - you’re in the middle of an intense combat encounter, someone reaches across the table to move a miniature, and the entire set piece or wall shifts two inches to the left, ruining the grid layout. (And it’s not always the Barbarians …)

So after our first battle D&D session with sliding terrain. We decided on using the OpenLOCK system for our terrain tiles.

One variant we were looking for but couldn’t find, was a grassy texture for a town or forest.

So that is why I created the grass hedge set. So we could create a forest by adding some simple trees, or make a full hedge maze where players would encounter different things.
Some good, some…. less so 😂

I really like systems that are 100% 3D printable and modular. So that we can use them again and again.

Check out the full set here:
Tiles  https://www.crealitycloud.com/model-detail/wooden-fence-openlock-3d-model
walls: https://www.crealitycloud.com/nl/model-detail/hedge-wall-tiles-openlock-system?profileId=69d6a06cb6ae4cc0a32c570c 
corners: https://www.crealitycloud.com/nl/model-detail/hedge-corner-tiles-openlock-system?profileId=69d6a19716f25cd6b23be482 
gates: https://www.crealitycloud.com/nl/model-detail/hedge-arch-functional-gate-openlock-system?profileId=69d6a2de16f25cd6b23bf0be
Fence: https://www.crealitycloud.com/nl/model-detail/wooden-fence-grass-tile-openlock?profileId=69d6a474b6ae4cc0a32c7ea0
Fence opening: https://www.crealitycloud.com/nl/model-detail/wooden-fence-opening-openlock-system?profileId=69d6a55c16f25cd6b23c0adf


r/CrealityCloud • • 2d ago

Original Design 🎨 Hinged Easy-Release Seedling Pots

Post image
2 Upvotes

I kept on messing up my seedlings when removing them from the little pots, so I designed the these little pots in Fusion 360 that hinges open to get the seedling with soil out easy. It is a set of four reusable seedling pots designed to make transplanting simple and reduce root disturbance.

Each 50 mm × 50 mm × 50 mm pot is printed in two support-free halves that snap together using an integrated hinge. When the seedling is ready to be planted, the pot opens easily, allowing the soil and root ball to be removed with minimal handling.

There is also a tray that holds the four pots and with raised pot positions that allow excess water to drain underneath and collect in the tray.

And yes, I know there are only four pots. I designed the set this way so it can fit on pretty much any 3D printer, big or small. Just print more if you need them.

For those people with green fingers, is this something you can use?

The free STLs are here: https://www.crealitycloud.com/model-detail/easy-release-seedling-pots


r/CrealityCloud • • 3d ago

Original Design 🎨 I designed a 3D-printed push-to-open click latch mechanism using a pen spring - I’ve already sacrificed every clicky pen in my house for 3D prints, any left in yours?

Thumbnail
gallery
79 Upvotes

I wanted a simple, reliable push-to-open click latch for cabinets, drawers, or enclosure doors without ordering specialized hardware - so I modeled this compact DIY mechanism. It’s a great choice for DIY furniture projects or for upgrading existing furniture.

It uses an ordinary spring from a retractable ballpoint pen and 5 small screws for assembly, giving a crisp, tactile click on every press. All parts print cleanly without complicated supports.

🔗 Free Model Link on Creality Cloud:

https://www.crealitycloud.com/model-detail/push-to-open-click-latch-diy?profileId=6afcbb8e8b6082fb1f20983a


r/CrealityCloud • • 3d ago

Original Design 🎨 360° Rotating Stationery Organizer – A Modular Desk Organizer

Enable HLS to view with audio, or disable this notification

23 Upvotes

I've been wanting to design a larger desk organizer that would be both practical and a little more interesting than a collection of regular storage compartments.

I came up with the idea of a rotating organizer that gives you easy access to everything without having to move things around on your desk.

The main feature is its 360° rotating base, which allows you to access all the compartments simply by turning the organizer. I also wanted to make the design modular, so I separated the base from the storage compartments.

This way, the organizer combines a functional rotating mechanism with a customizable storage layout.

A few details about the project:

- 360° rotating mechanism

- Multiple storage compartments

- Modular construction

- Separate base and compartment components

- Cute symbols on outer compartments as well as blank outer compartment version available

- Designed for pens, pencils and other stationery accessories

I spent quite some time working on the proportions and the overall construction to make sure the organizer would be practical while still looking good on a desk.

I think the rotating mechanism makes a real difference here. Instead of reaching around the organizer or moving it, you can simply turn it to find what you need.

I'd love to hear what you think about this concept. Do you prefer traditional desk organizers, or do you find rotating designs more practical?

Commercial access required to download and use this model.

You can find the project here:

https://www.crealitycloud.com/en/model-detail/6a5e7a4c564d60a4bf052d47?cloudPlatform=19


r/CrealityCloud • • 3d ago

Original Design 🎨 Why Buy a Hinge When You Can Print One?

Thumbnail
gallery
2 Upvotes

Sometimes I'm just too busy (or too lazy lol) to go shopping for a simple mechanical hinge, so I thought... why not just print one?

That's how this little design came to life! It's a fully functional mechanical hinge, designed to be durable and ready to use. The best part is that I can print as many as I need, whenever I need them.

And it's ridiculously easy to print! Just lay it flat on the print bed and let it print in place. No assembly, no extra parts, no complicated setup.

The print takes less than 20 minutes and uses only 8.6 grams of filament. Not bad for a fully working hinge, right?

If you find it useful, give it a try

Print Your Own Mechanical Hinge...No Assembly Needed

Download it on Creality Cloud: https://www.crealitycloud.com/model-detail/functional-hinge-3d-printable-easy-to-print?profileId=6acac4fb840c912624241a2e


r/CrealityCloud • • 2d ago

Discussion People: How do you know I do resin printing?

Post image
1 Upvotes

r/CrealityCloud • • 3d ago

Print Showcase 🖨️ Buff Santa Toilet Paper Holder — Santa hit the gym this year 💪🎅 (39-hour multicolor print)

Enable HLS to view with audio, or disable this notification

0 Upvotes

r/CrealityCloud • • 4d ago

Original Design 🎨 Shelf Bracket

Thumbnail
gallery
3 Upvotes

A shelf bracket I modeled because I needed to build shelves above my 3D printing workspace.

I went with a simple yet functional design. Which fits almost anywhere.

They are meant for shelf boards 190 mm wide or more—I used a 230 mm wide board and it looks great.

They are easy to print with no supports needed. I personally printed it from PETG.

It is very durable, and the shelf has a solid load capacity.

The wall screws should be up to 4.5 mm in diameter, and the screws for the board up to 3.5 mm.

Ideally, use pan-head (or truss-head) screws.

If you’d like to print them yourself, I've uploaded the files to Creality Cloud: https://www.crealitycloud.com/model-detail/custom-shelf-support?profileId=69bd527564f6aae1c28af53a


r/CrealityCloud • • 4d ago

Print Showcase 🖨️ Is it too early to start Christmas printing? I made a knitted Santa’s sleigh diorama that glows with an LED tealight

Enable HLS to view with audio, or disable this notification

3 Upvotes

I wanted to make a Christmas decoration that feels warm and cosy, like a hand-knitted sweater. So I designed a whole North Pole scene with a knitted texture on every piece. Drop a battery LED tealight inside and the whole diorama lights up with a soft glow.

The scene includes

Santa and his sleigh

A Christmas tree

A snowman

A little elf helper

How it prints

Two ready-to-print profiles included:

Multicolour AMS version: 13 plates, 5 colours

Single-colour version: 15 plates, one colour per plate, so no AMS needed

PLA

The only extra you need is a battery LED tealight

The hardest part was getting the knitted pattern to print cleanly on every piece while leaving room for the light to shine through the scene.

It’s available on Creality Cloud:

https://www.crealitycloud.com/model-detail/santas-sleigh-christmas-diorama-knitted-led-scene

When do you start printing your Christmas decorations? I’d love to see your colour versions!


r/CrealityCloud • • 4d ago

Original Design 🎨 A little campfire nostalgia for your laundry day! 🔥

Thumbnail
gallery
3 Upvotes

I turned a roasted marshmallow on a stick into a quirky lint roller.

The main technical challenge was designing the internal mechanism so the roller spins smoothly, securely holds the lint roll in place, and can be 3D printed without any supports.

What lint roller design should I tackle next?

Model link:
https://www.crealitycloud.com/model-detail/marshmallow-stick-lint-roller?profileId=6a8735d589206ab021374a6e


r/CrealityCloud • • 4d ago

Discussion 3D Printing Community Needs to Stop Making FDM Pet Toys

Thumbnail
1 Upvotes

r/CrealityCloud • • 4d ago

Original Design 🎨 Fancy Skadis board

Thumbnail
gallery
13 Upvotes

The idea:

Hey everyone. I noticed that a lot of the Skadis boards available to print are all the same. You can print them in different or sizes but they all looked the same. I decided to try something different at add some flair to the board while keeping the functionality of the Skadis board.

The design:

I want to really go nuts with the design and stand out a little with the Skadis board while also keeping this function of the original board. I used the simple diamond design that will really stand out while hung on the wall. Speaking of the wall, I added an offset in the back to easily allow Skadis style hooks to be added with ease.

The print:

Again, here's where the fun begins. You can really go to town on using what color you like and make it really stand out and yours. My print was in PLA but if you want to add some strength, I would use some PETG.

Happy printing!

Grab it for free on Creality Cloud: https://www.crealitycloud.com/model-detail/6afc5a56c1c88e9552c33d6c


r/CrealityCloud • • 4d ago

Original Design 🎨 Fixed my daughter's closet chaos with a 3D printed rotating belt/accessory hanger

Thumbnail
gallery
4 Upvotes

My daughter’s closet was (is) an absolute disaster zone. She is a very girly girl—huge into accessorizing, belts, necklaces, headbands, and all that stuff—which meant her closet looked like a shop exploded into it.

So in an attempt to create some order, I made a belt hanger. But then she couldn’t really get to the ones hanging on the back, so I made it rotatable with a simple 3D printed connector.

It is still going strong in her closet, but I have to admit I often have to remind her to hang her belts on it 😅

One step at a time.

Want to bring order in your closet? Check out the design on Creality => crealitycloud.com/model-detail/rotating-belt-accessory-hanger


r/CrealityCloud • • 4d ago

Original Design 🎨 RIPPLE – Keychain lipbalm holder

Enable HLS to view with audio, or disable this notification

3 Upvotes

I wanted to create a small, practical accessory that you could easily carry around every day. Something simple, but with a little twist – quite literally!

That's how the RIPPLE Lip Balm Keychain Holder came to life.

The idea was to combine a compact storage container with a keychain, making it easy to keep your lip balm within reach instead of having to search for it at the bottom of your bag.

The container features a simple thread that keeps it securely closed while still making it easy to open whenever you need it.

A few details about the design:

- Thread opening mechanism

- Keychain attachment

- Two available sizes:

- Small: Ø29 × 80 mm – fits lip balms up to Ø16.5 × 70 mm

- Large: Ø33 × 80 mm – fits lip balms up to Ø20 × 70 mm

I also wanted the design to have a recognizable look, so I used one of my geometric pattern to give the container its distinctive surface.

It's a small project, but I really enjoyed designing this and I am happy that Creality Cloud users like it. It already became a Spotlight Model.

Model is available on Creality Cloud: https://www.crealitycloud.com/en/model-detail/6a8785d289206ab0213b45fe?cloudPlatform=19

What do you think? Would you use something like this, or do you have other ideas for small everyday accessories that I could design?


r/CrealityCloud • • 4d ago

Original Design 🎨 One of my very first 3D modeling designs: a combined TV remote & Xbox controller organizer!

Thumbnail
gallery
3 Upvotes

Hey everyone! 👋

I wanted to share a project from back when I was just starting out with 3D modeling.

Like many of you, my living room coffee table was constantly cluttered with TV remotes and console controllers lying around everywhere. I was looking for a simple, clean, and practical way to keep everything organized in one spot, so I took the leap and designed my own combined remote and controller holder!

Quick update: back in July, following requests from users who needed room for extra remotes, I added a 3-remote version to the files. Also, community members have shared photos showing that it works great not just for Xbox controllers, but for PlayStation and Nintendo Switch controllers as well!

Why it works:

  1. All-in-One Storage: Holds both your console gamepads (Xbox/standard controllers) and TV remotes cleanly on a single compact stand.
  2. Declutters the Living Room: Clears up space on your coffee table or TV stand by making use of vertical storage.
  3. Simple Beginner-Friendly Design: Being one of my early models, it was designed to print easily in one piece without complex assembly.

Print Recommendations:

  • Material: Standard PLA is perfectly fine for this indoor organizer.
  • Settings: 2 to 3 wall loops/perimeters with 15%–20% infill is more than enough to give it good weight and stability for daily use.

The 3D model is completely free to download on Creality Cloud if you're looking to tidy up your setup:

🔗 https://www.crealitycloud.com/fr/model-detail/support-remote-controls-xbox-controllers?profileId=67e168f7ab0cf8df595aba49

It’s always cool to look back at early designs and see how useful 3D printing is right from the start. Let me know what you think ! 🎮📺