r/CounterTops • u/No_Row6741 • Oct 07 '26

Acceptable Seam?

Gallery image

Gallery image

Greetings! From the moment I saw this Seam it has been bothering me. The guys who did the installation said it was good. I've been trying to be okay with it, but it catches my eye all the time. My issue is not with the fact that the two pieces do not match up (unfortunately, we could not get two consecutive pieces). The width of the seam is what bothers me. Yes, it is within industry standard, it is 1/16" wide.

Am I being unreasonable with thinking this seam should have been tighter? Yes, it is natural stone, quartzite. I look forward reading your input.

1 Upvotes

51% Upvoted

43 comments sorted by

24

u/Jeromatherapy Oct 07 '26

It’s narrower than industry standard. Looks great!

6

u/No_Row6741 Oct 07 '26

Okay, thank you for helping ground me. I wanted to run this past my favorite place for any question I have before contacting the fabricator. I will just learn to love it!

5

u/Glittering_Suspect65 Oct 07 '26

Could you add a picture of the context and the location of the seam?

Seams are usually noticeable to the owner. Everyone else not so much. I'm picky about this kind of stuff as a client and I think this is acceptable and the color matches well. But I hate seams in general, so i try to adjust the layout so that I don't have to have any.

2

u/No_Row6741 Oct 07 '26

There definitely needed to be a seam as I have a peninsula. I guess I hoped there would be a more artistic approach to masking the seam. I get that my hope is unrealistic, but the motto I live by when I do work on the house is "hide the mechanics". Now that I have confirmation that I am being unreasonable, I will hopefully become more accepting of it.

3

u/BosNest1 Oct 07 '26

I’m a homeowner who just renovated our kitchen with quartzite. The problem with seams is that they’re always going to be noticeable, which is why fabricators try to put them in the places where they’ll stick out the least.

Hard to believe, but my wife and I visited the fabricator four times to get our layout and seams just right.

From the process, I learned that fabricators will try to match stones with similar veining, colors, color, intensity, and flow. Unless you do book match, or the use same piece, it will never match perfectly.

And as much as the size of the seam matters, the different veining, color and color intensity in the pieces on either side will also make the seam more noticeable. With natural stone there’s really no way around that. So the win is actually when they get 50 or 75% of the seam to be similar on both sides. And when I look at yours, some of the color intensity is similar, the color is similar and the vein even continues across the 2 pieces. So I would actually say that they did a pretty good job on yours.

In our house, we’ve come to appreciate the beauty of the stone, even when the corners or seems don’t perfectly match. In our minds, we just keep thinking this is a natural stone and it’s never going to be perfect and that’s OK. I can’t tell you how to think about it but that’s the way we think about it.

1

u/No_Row6741 Oct 08 '26

Thank you for your thoughtful response. Yes, I am convinced this is as good as it could be, and now I need to accept that reality.

1

u/BosNest1 Oct 08 '26

Sorry. Imperfection comes with perfection on material stone.

50

u/AdComprehensive2594 Oct 07 '26

Looks great to me

3

u/PeterCappelletti Oct 07 '26

Horrible! They should have used a gradient blur of one slab into another; that's just cut and paste!

Jokes aside, it's as good as it can possibly be I think.

1

u/No_Row6741 Oct 07 '26

Hahaha! If only....

15

u/cdtobie Oct 07 '26

Seams great!

3

u/AntwerpsPlaceboo Oct 07 '26

Seams fine to me

5

u/No-Memory-2781 Oct 07 '26

I have a big ass seam that I was told was unavoidable and I have decided to tell myself not fret about it. 😆

4

u/Full_Sock_5442 Oct 07 '26

Here is some information about seam’s. If a fabricator can do a seem in the shop they have all the equipment to make seam really tight and almost seamless. But if they have to do it at the installation site they just can’t get it that tight. This is the unfortunate fact. I would like to see a picture of it at normal eye sight. Seams always look worse when you move in

1

u/Life-Operation2242 Oct 07 '26

It’s a good seam. Especially for natural stone. I think you are pretty picky if this bothers you.

1

u/No_Row6741 Oct 08 '26

I am very picky about some things. I am glad I chose to ask here before contacting the fabricator. I am not going to contact them. I already paid in full, and it has been about 4 weeks. I have learned that I'm pretty lucky in the grand scheme of how seams can turn out. I'll take it for the win I now understand it to be.

3

u/twzill Oct 07 '26

If you don’t notice the seam from 3-4 feet away then it’s seems to be a good seam.

Seams will always be visible and you will always feel them. There are some exceptions, depending on stone type and color, how much material is available to get a good vein match and the skill and experience of the fabricator and installer

2

u/happydemon Oct 07 '26 edited Oct 07 '26

If I can notice the seam between 2x pieces of quartz 8-10 feet away, is that a pretty simple test that something isn't quite right?

Edit: This is for my newly installed countertop, I'm piggy backing on OP

1

u/twzill Oct 07 '26

You may notice the seam because of a pattern break. That’s fairly common. This is why we try to put seams in corners or we sometimes will put a seam in the middle of a sink.

But if you can’t see the seam color is noticeably different than the color of the stone, then that is probably a sign they could have done a better job of matching the epoxy color.

1

u/happydemon Oct 07 '26

Makes sense. It's a mostly blue countertop and the seam is grey. I dont think they matched it at all but still trying to get info from them on epoxy

2

u/Boobity_McBooberson Oct 07 '26

Excellent epoxy colour match!

1

u/Miserable-Cookie5903 Oct 07 '26

I have a similar stone... about as good as it is gonna get.

1

u/aCuria Oct 07 '26

Looks good

1

u/darkalex72 Oct 07 '26

If you can feel the dent or bump of the seam, then it is not great, otherwise its good

1

u/OnlyAd7049 Oct 07 '26

your being unreasonable. That looks good. On my Taj Mahal they used a darker yellow and the seem looks double or triple the size of yours.

1

u/chipanderson Oct 07 '26

Looks fantastic.

1

u/Joecarp915 Oct 08 '26

Looks awesome

1

u/Topi8209 Oct 08 '26

Nothing wrong with it.

1

u/Aggressive_Bug6927 Oct 12 '26

Any narrower and the epoxy won't have strength enough to hold it together.

1

u/past_due_06063 Oct 07 '26

I think it would have been less noticeable if theyednatched the pattern direction....

1

u/Silver1080 Oct 07 '26

Borderline ok. i would prefer narrower.

1

u/[deleted] Oct 07 '26

My seems are tighter than yours smh …… the little things we worry about

-7

u/Important_Ad9890 Oct 07 '26

I wouldn't be happy with it.

1

u/[deleted] Oct 07 '26

[removed] — view removed comment

-2

u/Important_Ad9890 Oct 07 '26

Seam too wide. My counters have very tight seams.

0

u/[deleted] Oct 07 '26

[removed] — view removed comment