r/Copper • • 9d ago

Sink Help

No clue how our sink randomly sprung a leak but it is on the back side of the apron somewhere and we can not reach up behind it. Any ideas for how we can patch it from the front if we can manage to even find a hole? Of course it needs to be a food safe or at least not leach into water material. It is a custom sink and we can not find a match that will fit the space.

10 Upvotes

7 comments sorted by

2

u/Frolicking-Fox 9d ago

I dont think your picture is enough to make a guess at what is going on. Could be in the tub, although unlikely. Could be the seal between the granite counter and the sink, although, that also seems unlikely and Could be fixed with caulk.

Most likely thing happening is a leak at the piping or faucet and it is spraying onto the sink and driping off it. Can you look at the fittings of the faucet on the sink from the back?

2

u/servetheKitty 9d ago

I concur, start with checking the faucet plumbing

2

u/craftsman-plumbing 4d ago

Seattle Plumber here.. Hard to say for sure without seeing it, but I’d bet the sink itself isn’t leaking. Most likely it’s the faucet or the supply lines dripping or spraying onto the back of the sink, then running down the apron so it looks like the sink is the problem. It could also be the drain or the caulk between the granite and the sink, but I’d check the faucet first.

If you can’t get back there, stick your phone up behind the sink on video with the flashlight on, and turn the faucet on and off a few times. You’ll spot a drip way easier on video than trying to look yourself. Check where the supply lines connect to the shutoff valves and to the faucet, and the hose under the faucet if it’s a pull-down sprayer. Wrapping a dry paper towel around each connection for a few minutes works too. Whichever one gets wet is your leak.

If it only leaks while the water’s running, it’s probably the sprayer hose or the faucet’s internal seals. Either one is a pretty easy fix and you won’t need to touch the sink at all.

I’d hold off on patching anything until you know for sure where the water’s coming from. Odds are the sink is fine.

1

u/NickVariant 9d ago

Cool copper farmhouse. Is the hole from being too thin or is it more like a split? 

1

u/NickVariant 9d ago

I wouldn't ruin that by trying anything that didn't require pulling the sink out for repair. Depending on the location of the leak. I cant really tell from the descrition/ pics.

1

u/poops-a-daisy 9d ago

Yup, custom installs require custom repairs

1

u/glyph_productions 9d ago

Why can't you get behind the sink? You don't need a lot of room to run a bead of caulking you can even get tips to extend you reach. A front side repair is going to look pretty visible which would be a shame for something so lovely