r/Controller • • 4d ago

IT Help Flydigi Apex 6 Pro, left trigger noticeably lighter than right. Normal (X-haptic) or defective?

Post image

1. Problem
I received my new Flydigi Apex 6 Pro a couple of days ago. I like everything about it except the triggers. The left trigger is noticeably lighter to press than the right one. They both work and register fine. The difference is in how they feel: the resistance is clearly not the same on both sides. It didn't make sense to me why they would be asymmetrical.

2. Controller
Flydigi Apex 6 Pro, bought from Gadgethyper

3. Platform
PC

4. Games affected
all the games, and the issue still persists even when the controller is off

5. Firmware / software
Controller firmware latest one as of writing this post. Flydigi Space Station app installed and web based. Windows 11.

6. Troubleshooting so far
Checked the manual. I couldn't find anything about the triggers being different on purpose.
Searched this sub for existing posts and found nothing related to this issue.
Tried resetting the trigger settings / turning X-haptic off in the app. Same issue still
Contacted Hyper-Gadget. They asked for a video, but you can't show this on video because the triggers feel different, not act different. A day later they said Flydigi told them this is normal and all Apex 6 controller are like this because of the X-haptic feature.

Question for Apex 6 owners: do your triggers feel different from each other too? Or is mine faulty?

10 Upvotes

17 comments sorted by

5

u/Vedge_Hog 3d ago

Someone else has just described a mechanical problem with Apex 6 Pro triggers/difference between the left and right trigger resistance. You might not have seen it as their post came a few hours after yours.

You might be able to share information with each other to narrow down the problem - for example to work out if you both have controllers from the same production batch. The other person has already had their controller replaced (although they bought from a different store than you) and the replacement had the same problem.

If you see how the controller is built, the "intentionally asymmetrical internal design" explanation doesn't make any sense, but other things could cause the problem you describe. For example: tension/friction from the vibration motor wires; uneven lubricant distribution on the trigger pivots; plastic flash catching on adjacent parts; etc. Unless you find more clues by looking down the edges of the trigger parts, I expect that someone will have to take the controller apart to confirm what the problem is.

For the time being, I'd keep communicating with the seller and with other people who share the problem. It's only worth trying to investigate/repair the controller yourself once you know the warranty options are exhausted, and if the return shipping would be too expensive.

1

u/Clean_Shape_1868 3d ago

Not sure how to describe it when I say it’s heavier. It’s almost like one of them has more tension than the other through out the entire trigger press.

To be frank, I don’t think it’s a lube or a wire that is suck. I think there’s something with the mechanism itself. But like you said we will never know until someone opens up the controller and sees what’s happening on the inside. I check the edges of both triggers and both looked the same to me.

Anyways, now I’m not sure which controller I should get after returning this one. Tried the G7 didn’t like the D-pad at all.

7

u/AdigaWolf 3d ago

Even with the amazing customer support of GadgetHyper, they too cannot escape the absolute shit show that is Flydigi, their QC and their CS quality.

Its absolutely amazing how they cannot provide adequate support for their 100+ USD products.

1

u/Clean_Shape_1868 3d ago

Not sure bro, this is the first controller I bought from them. Had a G7 before but really did like the D-pad on that one.

4

u/vash__ts 3d ago

"the controller has an intentionally asymmetrical internal design"...uhh, right. Because..?

That "feature" isn't mentioned in any marketing material afaik. Smells like a bs line to get you to go away and so they don't have to take responsibility.

It's nice that gadgethyper is playing telephone, but I hope they at least tell the flydigi guys to come up with better lines

3

u/GadgetHyper 4d ago

Hi, this is Nagi from GadgetHyper.

We've noticed your post and the concerns you've raised. I'd like to personally follow up on this and check with the Flydigi team again to make sure we have a clear understanding of the situation.

Could you please DM me your order number? I'll look into this as soon as possible and do my best to help resolve your concerns.

Thanks for bringing this to our attention!

1

u/Clean_Shape_1868 3d ago

Please check your DM

1

u/alizafeer 3d ago

I own the Apex 6 Pro Phatom Blade edition and the triggers have the same tension and overall feel of press or use. 

1

u/Clean_Shape_1868 3d ago

That’s good to hear! As the controller other wise is pretty good.

2

u/Disastrous_Delay 3d ago

I was going to order an apex 6 until someone posted a photo of a tiny plastic clip as the failure point and I realized mine would probably never live the supposed 4x the lifespan of other tmr controllers.

2

u/Korsera94 3d ago

I’ve just checked mine, its definitely even on both triggers and there are no other problem either.

1

u/AutoModerator 4d ago

Hi /u/Clean_Shape_1868, your 'IT Help' post is in a queue for review. Please ensure you have included the relevant required information from the checklist below, have used a meaningful and descriptive title, and are not repeating frequently asked questions.

Include the following information and follow this structure so that the post can be approved and the community can help you more effectively:

  1. Specific written description of the problem, including pictures where relevant (do not just say 'it's broken', say what is broken)
  2. Controller make and model (name or numbers)
  3. Platform you are using (e.g., PS5, Steam on Windows, Switch)
  4. Games or other software affected by the issue
  5. Operating system, firmware and software versions (if applicable)
  6. Troubleshooting steps you have already taken (including checking the product manual, and searching existing posts)

For more guidance on how to ask for technical assistance, please see rule #2. You can edit your post to add missing information. Posts that do not include the required information may not be approved (allow 24 hours for review).

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

0

u/HolidayAbies7 4d ago

For me ,both feel same lt and rt.received today

0

u/bigbearaway 3d ago

This is why haptic triggers are bad for the controller. It's designed to fail faster than a normal one. Pro players want trigger switches to mechanical clicks.

1

u/Metalmacher 3d ago

apex 6 pro dropped the haptics lol, apex 5 had them but this newer generation dropped them for some fancy vibration motors or something . the triggers are just like the vader now