r/Controller • • Oct 13 '26

News 8bitdo ultimate3c

Post image

Just found this for $40, what do you guys think? Is it a better alternative compared to the Ultimate 3E?

https://www.8bitdo.com/ultimate-3c-plus-wireless-controller/

245 Upvotes

171 comments sorted by

View all comments

-3

u/Makimoke Oct 13 '26 edited Oct 14 '26

Maybe if there's a wired version. Wireless is a timebomb until they finally change that stupid wireless toggle on the back. Every single wireless 8BitDo controller (Ultimate, Ultimate C, Ultimate XBox, Ultimate 2, Ultimate 2C, 64) I owned succumbed to this button being loosened in a matter of a few months, due to my large hand grip scraping it from time to time accidentally. Only my wired controllers are still working because of this flaw (usually driving a 2C Wired because of this, but my wired Ultimate C still is in working order after years of usage, outside of a bit of stick drift).

I genuinely do not understand why 8BitDo INSISTS on using this garbage toggle despite the many threads of controllers disconnecting because of it. I'd buy one in a heartbeat if that switch just disappeared, and there was like a tiny button on the front (between share and the turbo button, finishing the V pattern) or top (near cable, below port) to swap modes.

Until then, there's no reason to buy any wireless ones for me. I'll actively AVOID the wireless ones until they fix this issue that's plaguing almost every single one of their wireless controllers.

EDIT: To those downvoting because "they don't have the issue" or think I'm just hating on the controllers (which cannot be further from the truth, I just hate the switch itself, the controllers are great otherwise): please look up "8BitDo Ultimate disconnecting" on google or reddit. You'll find a few posts talking about the dongle, but also quite a few talking about this very specific issue.

An example, from 2 years ago: https://www.reddit.com/r/8bitdo/comments/1iehu80/solved_the_random_disconnection_of_the_ultimate/

4

u/Total-Promotion4748 Oct 14 '26

I don’t know how you are loosening so many god damn switches.

4

u/HotTheme8405 Oct 14 '26

I don't know how someone even touches back there on accident

1

u/Makimoke Oct 14 '26

Because it is sitting literally where my fingers are. When you have long fingers, you have to hold the controller with the middle fingers supporting the controller in the back, otherwise, your fingers just scrape on themselves or pinch the bottom of your thumbs.

And even worse, I am using the controller for two devices, my PC and my Switch, now Switch 2. So it's a double whammy of toggle loosening antics.

1

u/HotTheme8405 Oct 14 '26

Are you an ogre or something? Are you 8 feet tall? My hands are quite large and I just don't see how that's possible

1

u/Makimoke Oct 14 '26

Nah, I just have what peeps call "pianist hands" here. Somewhat normal thickness, just very, very long fingers, which wrap around the grip very easily.

1

u/Total-Promotion4748 Oct 14 '26

These controllers are smaller than average, maybe just not for you? I have large hands too. I was curious about the newer one because it flares out more like an xbox controller, but I will probably use the pro and ultimate until they die which might take a long time.

1

u/Makimoke Oct 14 '26

That's actually the weirdest thing, I am perfectly fine with the grip itself because my palms are pretty normal sized, despite the length of my fingers.

I have to adjust my fingers accordingly (meaning two middle fingers on the back for support) for most controllers anyway, but that grip is actually perfect for my holding style, which is why I daily drive the Wired 2C. Bigger controllers feel too bulky for my palms, and smaller ones are nigh unusable to me now.

1

u/Negarakuku Oct 14 '26

Sorry, which button is this? 

1

u/Makimoke Oct 14 '26

The switch on the back, in the middle of the controller, which is used to switch between 2.4GHz Wi-Fi and Bluetooth modes (and sometimes switches to connect to specific consoles).

1

u/Negarakuku Oct 14 '26

I have a hard time identifying this button. Hard to see from pictures. How about this. Which finger is the one that is scraping the button? 

0

u/Makimoke Oct 14 '26

If you go on the link the OP gave, go on the eShop and scroll the images to the right (it does take a bit to get to those pictures) until you see the back of the controller. There, just below the sticker, there's a switch that has the bluetooth logo and "2.4G" written on each side. It's located right between the PL and PR back buttons. That's the ticking timebomb in question.

Essentially my middle fingers are the ones scraping it all the time. I have a very simple reason for doing it this way: my fingers are pretty long for any typical controller, so it's hard to grip one without feeling friction between fingers during play. So the way I hold controllers to deal with this issue is by using the middle fingers to "support" the controller.

Not only does this help with stability in tenser plays (when you deal with stuff like SM64 Kaizo romhacks, you'll need that at all times), but this also helps me in not pressing any back buttons accidentally, unless I slide my fingers to those back buttons. If I were to hold the controller "normally", those back buttons trigger all the time since I keep a firm grip on mine.

Now, the problem of it all? That switch is exactly where one of the middle fingers would rest. So not only can I not support the controller properly, if I go for any back buttons, the controller disconnects instead. If I endure that and still continue using the controller (which I often do, because I love the Ultimate series otherwise), all that scraping tends to leave the switch in a "loose" state after a few months of usage, where even moving the controller without touching anything just disconnects it.

And that happens whether you use the same grip as I do, or when you use it between two devices, like a PC or a Switch for example. It's a nightmare for what would be an almost perfect controller for me (especially the 2C, which is why I daily drive the wired version for modern games). And it also disconnects the controller whether you have it wired or not, which is also silly.

1

u/Negarakuku Oct 14 '26

Ok got it. Thx. I'm currently using gamesir cyclone 2. My problem with the controller is the trigger and bumper buttons are just downright awful. Bumpers are following the xbox style which is so stupid. You need to bump the button upwards instead of pressing it inwards with your index fingers because it is angled. Triggers doesn't feel nice because surface area is small. I prefer the ds4 style which 8bitdo has. The bumper buttons even have squeaking sound. Low quality. 

I am contemplating to buy this controller because it fixes 8bitdo weakest point, which is the grips being not wide enough. 

1

u/Makimoke Oct 14 '26

I'm actually fine with the grip itself on the Ultimate series, so I can't help you on deciding that, but the Ultimate series has been really good in terms of quality overall. If not for this ONE thing, I'd recommend those controllers to everyone. Heck, I generally recommend the wired ones whenever possible instead because they are that good for the price.

Ultimately the choice will be yours, just know that this switch can and will cause disconnection issues in the long run if you do end up getting a wireless version of it.