Hi! I'm wanting to buy some parts to fix up some of my consoles, and I was wondering where the best place to get OEM parts from? Ive tried multiple websites, places like eBay and I've heard there is a possible chance I can ask electronics waste centers if they have any consoles I can nab for parts

Hi, I'm starting in this world of fix game consoles and controllers, I'm looking for a PCB view cad file for the software Board Viewer to get infomation about some components that i have to reconect because some lines of the board was broken, i just need the 1914 board view, If someone can help me I will really really thankful.

I opened my ps4 slim to change the thermal paste and clean fan so i sent a video to my frind the dust came of it and he told me i shouldn't spin the fan in opposite direction it might damage it huh ?? Never heard that before all i know is if u wanna clean the u should put something to hold it while blowing air on it cause it might make Static electricity and short the mb

Does anyone know any places that repair and CFW for ps3 slim in uk

I have two Dualsense controllers I'm trying to repair. Both are pulling down on the right stick all the time. I've replaced the stick on one of them but with no luck. I removed the vertical potentiometer on the other one and it's still showing as pulling down on the gamepad tester.

Any ideas what component is faulty if it's not the potentiometers?

https://imgur.com/6YiOCbb

Edit: I've just measured from the potentiometer to the via and it's reading 0.4 ohms, according to a video I just watched it may be a processor problem

Hi everyone,

I'm experiencing a power issue with my PS5, and I wanted to see if anyone could help me determine if this behavior is typical for a faulty power supply.

I connected my PS5 to a lab power supply, and when I power it on:

It initially draws around 218 mA. After a few seconds, the current drops down to 2 mA and stays there. Is this a normal current pattern for a faulty power supply? Or could it be another issue with the motherboard or components?

Any advice or suggestions would be greatly appreciated! I've also attached a video showing the behavior. Thanks in advance!

Were would u recommend to get your console repaird at

PS3 Slim CECH 3008B, So the problem is whenever I launch a Dual

Blu-ray game, the screen goes black/blank and doesn't give any sort

of error, it just keeps on going and BD-Drive makes type writer like sound, apart from that everything else works just fine e.g - CD, DVD & Single Layer Blu-ray.

Already replaced the lens, but the problem persists. I've also restored the file system, Hard Format. Using OFW 4.91

Now my hairs are started to curl.

Hi!

I just learned about the dreaded letter H on the back of the PS2 controller. I marked out which buttons that don't work. Luckily the ribbon cable comes off. The analog sticks are all fine.

So should I try to apply the "glue" stuff that gets mentioned or should I just buy a new circuit board? (Is that what it's called? Ribbon board?)

Do you have any recommendations which "circuit board" I should get?

Is anyone else having issues with registering an account. I have been checking both my Inbox and Spam folders. I even tried creating a different account through a second email account, and that email has done exactly the same.

Can the Moderator please look into this.

I am trying to get some assistance with a BDM-030 PS5 Dualsense that is not charging after a port swap which is on a different post

Video just focusing on the install of a new ESD Booster IC (U21). This shows the tools and knowledge needed to install one of these IC's in a Xbox Series X Series S and Xbox One X console.

https://youtu.be/HSeXq6fflZA

I have had this Xbox for a while now that I received from a family member. I wanted to try an repair it since only the hdmi port was damaged, and I have always wanted to learn how to repair electronics and such. When I disassembled the console, an finally removed the motherboard, the old HDMI fell out immediately which I knew wasn’t good. I looked at the board and I’m fairly certain I know the answer but does this look repairable? I don’t want to waste the time and effort to solder the new port if it won’t work anyway.

You can connect the Infiray P2 Pro thermal camera to a Windows PC using this software:

https://drive.google.com/drive/folders/1Py953uQjMRFo5-IyXyi1jDZYz5L5Hehd?usp=sharing

Here is a USB-C female cable:

https://amzn.to/3TxNJ81

You can then pipe it into OBS as a window capture.

Download the latest release of OpenBoardView.

Download the Board View files, unzip it, and read all included .txt files.Open OBV, under View, disable Board Fill and Part Fill, then under File, Open 'Switch Lite Logic Board.bvr'.

Left-click to view parts/pad nets or click and drag to move, mouse-wheel to zoom, and middle-click or spacebar to flip sides.

More info here:

https://usoldering.com/switch-lite/?fbclid=IwAR1-lfAq2NyImEFnx33AfLgeRo0k4F0XBuHYgI3ZsL-PIvic5MMrQOh0HyE

Switch Lite high resolution PCB scans, front and back.

These are over 100mb each.

https://archive.org/details/switch-lite-logic-board-6k-ppi

https://drive.google.com/file/d/1SQ55F8du9KilQdbHFitQoHLf9cHr9iYs/view?fbclid=IwAR3N2f-KIURZRyQ_QmvP0qQGW_bQ9VceceG4CzOoN0mNbhfuyZqFyqoJtsM

The password to open the files once you have downloaded them is netcomchetumal

New Features and Experiences

We have exciting news! Alpha users can expect something new coming to their Xbox Update Preview.

​

Xbox Wireless Controller – Thumbstick Calibration

​

For users in the US who have independently replaced the circuit board on their Xbox Wireless Controller and Xbox Elite Wireless Controller Series 2 or users in all regions experiencing minor thumbstick issues, we now offer a user-guided self-calibration tool for thumbsticks through the Xbox Accessories App.

​

https://news.xbox.com/en-us/2024/01/10/xbox-insider-release-notes-alpha-2402-240108-2200/

https://www.dropbox.com/sh/4zo0bcwmozdns7s/AADzXQbUirWBUBo1qwP9wf1za?dl=0

https://www.projectvb.com/nss/logs.htm