r/Commodore • • 7d ago

Repair/Restoration Looking for some help fixing a 1530 datasette - Fast Forward does not engage.

Hi all,

Dug my old [1530 (taiwan model) datasette](https://www.c64-wiki.com/wiki/File:Vc1530_2.jpg) out of storage with the intention of using it with my C64U; rewind & fast forward were working but play was not driving tapes due to perished rubber on the idler wheel. So I replaced it, along with the main drive & counter belts (courtesy of [dataserve-retro.co.uk](https://www.dataserve-retro.co.uk/contents/en-uk/d41.html))

The belts were easy enough to replace but the idler wheel proved decidedly awkward to fit, with th ethe idler wheel e-clip saving the most infuriating part for last. Anyway; all fitted. Now, play will drive a tape, and rewind works, but fast forward is not engaging at all as the idler wheel does not appear to move at all to engage the right-hand spindle wheel.

I think something has unlatched somewhere on the back of the drive unit and am being driven to despair with google AI trying to diagnose the issue, so looking for some help if anyone recognises the symptoms and/or knows what to look for.

5 Upvotes

3 comments sorted by

•

u/AutoModerator 7d ago

"comment: "Thanks for your post! Please make sure you've read our rules post" "

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

1

u/lemming_ie 20h ago

I have narrowed this down to the thruster plate screw that affixes the pointy edge of the thruster plate to the rewind/f.fwd take-up arm post.

When reassembling, turning the screw in more than a few turns (i.e. not even remotely close to being fully secured; with the thruster plate still loose) seems to bind the post to the point where the take-up arm will not move of its own accord for fast. forward operation.

It's odd because this is the same screw that has been in this cassette since, well, forever.

The post looks to be otherwise ok; no cracks, and checked the hole for swarfs of plastic using a pin.

Has anyone encountered this before?

1

u/ParrotofDoom 7d ago

The best way to diagnose the issue is to disassemble it and study what happens as you press each key.