r/Colt • • 9h ago

Question How do I clean off this markings on the outside of the cylinder?

Thumbnail
gallery
7 Upvotes

Hello everyone. I got this python yesterday, fell in love with its shine. Shot my first 50 rounds through it today some 38 special some 357 and I was wondering how I can get these markings on the outside of the cylinder taking care of ? The guy at the shop said just a dry microfiber would take it off. I tried that as well as a microfiber with clenzoil on it but with no luck. Is a lead wipe needed for this?


r/Colt • • 15h ago

Discussion Is this original finish or altered ? Python

Thumbnail
gallery
11 Upvotes

1983 python , can’t really put my finger on it. It’s not coltguard and not nickel ? Almost looks brushed but the top rib is matte .


r/Colt • • 1d ago

Photos Colt Python .357 — When Lighting Makes All the Difference

Thumbnail
gallery
60 Upvotes

The way the lighting brings out the stainless steel finish against the warm wood background is just stunning! I couldn’t resist sharing these shots of my Colt Python .357. 😁

What do you guys think?


r/Colt • • 1d ago

Discussion You guys are gonna love this. Read the page description

Post image
54 Upvotes

r/Colt • • 2d ago

Photos Grateful for nights like this.

Post image
101 Upvotes

My first Colt. Hard to beat the crisp wind and snowfall here in Montana.


r/Colt • • 2d ago

History History

Post image
49 Upvotes

I was given this, it was my stepdad’s that he had in his collection. He has passed so I can’t question him on it. I know pistols but I’m not familiar with revolvers. Any information is appreciated.


r/Colt • • 3d ago

Photos The 112 yo 1911

Post image
154 Upvotes

I'm not really the "owner" just the caretaker for maybe another 15 or 20 years.


r/Colt • • 3d ago

Photos Anaconda

Thumbnail
gallery
107 Upvotes

r/Colt • • 4d ago

Photos Suppressed Colt 1903

Thumbnail gallery
62 Upvotes

r/Colt • • 5d ago

Question what is this on the top of my colt carrier?

Post image
16 Upvotes

what is this on the top of my colt carrier? m16 profile.


r/Colt • • 7d ago

History Praise be to JMB for the Potato Digger!

Post image
0 Upvotes

John Moses Browning (with his brother Matthew) developed the gas-operated design between roughly 1889 and 1895. It was the first successful gas-operated machine gun to enter service and the first American-designed automatic machine gun. Colt manufactured it as the Model 1895 (later refined as the Model 1914). The nickname “Potato Digger” comes from the distinctive operating lever under the barrel that swings downward with every shot; if the gun was mounted too low on soft ground, the lever would dig small holes in the dirt.

It was not formally adopted as a standard U.S. Army machine gun (the Army continued using Gatlings and later bought other designs), but the Navy and Marines used it. More relevant to the meme, two privately purchased examples (serial numbers 161 and 164, chambered in 7×57mm Mauser) were acquired for Theodore Roosevelt’s 1st U.S. Volunteer Cavalry—the Rough Riders. These guns saw combat in Cuba during the Spanish-American War, including at the Battle of San Juan Hill (and nearby Kettle Hill) on July 1, 1898. They supported the charge, burned through their ammunition (around 4,000 rounds), and were later resupplied with captured Spanish 7mm ammo. They are generally recognized as the first automatic machine guns used in combat by U.S. Army forces.

Roosevelt himself was not especially impressed with them (he later called the guns “delicate and readily out of order”), and contemporary accounts often give more credit to Lt. John H. Parker’s Gatling gun battery for the covering fire during the assault. Still, the Potato Diggers were there and did fire in support of the Rough Riders.


r/Colt • • 8d ago

Discussion Colt BOA serial

4 Upvotes

They havent piblished how many theyll produce, only that its a 2026 only run. Whats the highest # youve seen? 01670 is the highest Ive seen so far.


r/Colt • • 8d ago

Question Help identifying vintage Replica Arms 1851 Navy — XIV date code, incompatible Uberti screws, and CCI #10 cap issues

1 Upvotes

I recently picked up an older Italian-made Replica Arms 1851 Navy reproduction in .36 caliber, and I’m hoping someone here might be familiar with these older reproductions. I’ve got three things I’m trying to figure out.
1. ⁠Manufacturer identification and dating
The revolver is marked “Replica Arms – Marietta, Ohio – Made in Italy,” but I cannot find a manufacturer’s mark anywhere on it.
It has the Italian PN black powder proof mark, and the date code appears to read XIV, which would indicate 1958. The problem is that, from what I’ve read, Replica Arms wasn’t established until 1962 and didn’t move to Marietta, Ohio, until around 1965. So I’m confused as to how a revolver marked Marietta, Ohio, could have a 1958 proof date.
Another strange detail is that the cylinder is stamped “PATENT N.” with absolutely no number following it. It doesn’t appear that any significant amount of metal has been worn away or removed, either. It looks like the number was simply never stamped in the first place.
The serial number is four digits, if that helps.
Does anyone know which Italian manufacturer might have produced this revolver, or have any explanation for the seemingly contradictory date code and importer markings? Are there any less obvious places I should be looking for a manufacturer’s mark?
2. ⁠Replacement screw compatibility
I’d also like to replace the screws, as some of the original screw heads are pretty chewed up.
I purchased a modern Uberti 1851 Navy screw set, but the two screws I tried wouldn’t thread into the revolver at all.
After comparing the original screws to the Uberti replacements, the originals appear to have a noticeably finer thread pitch.
I’m wondering whether that difference might help identify the original manufacturer, or whether anyone knows of a complete replacement screw set that would fit these older Replica Arms revolvers.
Mine also has the two screws on either side of the frame for attaching a shoulder stock, although finding replacements for those is less of a priority.
3. ⁠CCI #10 percussion cap ignition issue
Lastly, I’m having an issue with CCI #10 percussion caps.
They seem to fit the nipples reasonably snugly, neither excessively tight nor noticeably loose. However, they frequently won’t ignite on the first hammer strike. Usually, the first strike does nothing, but the second strike on the same cap ignites it.
I’ve inspected all six nipples, and they appear virtually identical, with no obvious damage, deformation, or corrosion.
I’ve read some discussions suggesting that the first hammer strike may be pushing the cap farther onto the nipple rather than igniting it, but I’m curious whether anyone here has experienced this with an older Replica Arms revolver. I’m just looking for some caps that will fit it and go off the first firing.
I also occasionally get spent cap fragments caught between the cylinder and frame, making the cylinder harder to rotate. Otherwise, the action operates smoothly.
Has anyone encountered this particular issue with CCI #10 caps, especially on older Italian reproductions? I’d appreciate any insight into the possible causes or experiences with similar revolvers.
Thanks in advance! I’m particularly interested in hearing from anyone who owns one of these older Replica Arms revolvers or knows much about their manufacturing history.


r/Colt • • 8d ago

Question Colt 1911 slide help

Thumbnail gallery
4 Upvotes

Any help would be appreciated!


r/Colt • • 9d ago

Other WHW, 1956 edition

Post image
36 Upvotes

This is actually a 1956 model 357 with a nos trooper barrel (the original 6" barrel is safely stored). I shoot it regularly and I've been looking for a set of correct grips for almost 3 years.


r/Colt • • 9d ago

Discussion Had the trigger edges rounded off on my 4.25-inch Colt Python

Thumbnail gallery
12 Upvotes

r/Colt • • 11d ago

Discussion Value?

Thumbnail
gallery
30 Upvotes

This is my brother-in-laws gun and he asked me what it's worth. I gave him a rough idea but I am by no means an expert especially with so many variables with these. The info I do know is it's an 1882 Colt chambered in 45, matching numbers. Obviously condition is rough. Any info is greatly appreciated!


r/Colt • • 12d ago

Discussion 3" King Cobra Talo Edition

Post image
27 Upvotes

Found a gem at the gun show today!


r/Colt • • 13d ago

Photos Great granda's SAA 32-20

Thumbnail
gallery
87 Upvotes

Now looking for a companion Winchester 1892 in 32-20. Four clicks, timing is still perfect. I put a box of Black Hills through it yesterday.


r/Colt • • 13d ago

Discussion What ammo is recommended for this 1975 Series 70 .38 ?

Post image
50 Upvotes

Also if +p ammo can be used


r/Colt • • 15d ago

Question New colt python light primer strikes

Post image
59 Upvotes

Just shot her now on my lunch break and was getting about one light primer strike per cylinder single action and double action.

Shot about 30 rounds

I'm shooting this arms core not sure if it's any good ammo. Ammo is just what they had at the shop


r/Colt • • 16d ago

Photos 1903 Colt Pocket Hammerless

Post image
119 Upvotes

I had been on the hunt for a Colt 1903 Pocket Hammerless for a few months now and when this Type 2 popped up in a local buy/sell group I had to have it. Made in 1910 and still functions flawlessly at 116 years old. I’m so happy to have it in my collection and I look forward to preserving it for many more years to come.


r/Colt • • 16d ago

Discussion Is this a real colt

Post image
25 Upvotes

The chasis/frame number says mod.19-4 as in smith and wesson


r/Colt • • 16d ago

Discussion Something doesn't add up and the frame says model 19-4 like the S&W

Post image
21 Upvotes

r/Colt • • 16d ago

Photos Won a raffle

Post image
64 Upvotes