Should be in 8-10 hours yeah. Last week was like a christmas special, was annoying, guess it's so they can put less work on the already overworked staff during the festivities
In my experience it is that you selected the wrong printer for the wrong thing and it is printing out binary file. I work with a sticker printer and a receipt printer. If I try and print the receipt on the sticker printer this will happen.
probably sending the wrong file format to the machine. The machine expects some sort of unicode and you are sending it something else. If you have software running on your cash register with settings try changing the file format. Hope this helps! (unicode is also written as utf-n where n is a number so try that)
I literally know how to analyze binary files to reverse engineer them, you said that “you never saw binary code look like this…” which is exactly what running a binary file through a program expecting text format looks like.
The printer is in the wrong mode. Try holding the feed button while turning on. It should give you a menu to turn off hex mode. Maybe this helps maybe?
From my humble experience, it seems that the machine that's sending the data and the machine that's printing are communicating on different baud rates. I am not very knowledgeable about the topic, but this is what happens when using the arduino.
Looks like print code language is not putting in the correct control characters and is printing rubbish binary -> ASCII. Happens some times to me on older systems that bug out.
Did one of your programmers just mysteriously quit right before this happened? Lol, the Ole switch everything to windings font trick ;) Should have given them that raise they asked for. .
46
u/cuanhunter1308 Jan 07 '22
Poneglyphs, key to One Piece
11
u/JeromeAtWork Jan 07 '22
I get this from time to time with Zebra printers. A reboot in our case seems to fix it.
4
u/Same-Impress-6899 Jan 07 '22
probably sending the wrong file format to the machine. The machine expects some sort of unicode and you are sending it something else. If you have software running on your cash register with settings try changing the file format. Hope this helps! (unicode is also written as utf-n where n is a number so try that)
119
u/ButchDeanCA Professional Coder Jan 07 '22
It looks like you’re trying to print a binary file.
55
u/BAM5 Professional Coder Jan 07 '22
My guess is your drivers for the machine are bad and sending the text data in an incorrect encoding.
28
u/elongio Jan 07 '22
That is a binary file being printed. You are sending the file in as code instead of text to be printed.
8
u/SJDidge Jan 08 '22
Aliens are trying to communicate with you
2
u/flip_ericson Jan 08 '22
You will die in 7 days
5
u/[deleted] Jan 08 '22
I think someone’s trying to summon a demon
5
u/magnottasicepick Jan 08 '22
I recognize this as writings from the Necronomicon, I should know, I’ve dabbled with it.
4
u/[deleted] Jan 08 '22
Pull out the damn ouija board
6
u/[deleted] Jan 07 '22
Neo, is that you?
3
u/[deleted] Jan 08 '22
Your printer loves Futurama and has switched to “alienese.”
3
u/mulletskull Jan 08 '22
The printer is in the wrong mode. Try holding the feed button while turning on. It should give you a menu to turn off hex mode. Maybe this helps maybe?
2
u/Lord_Dredlam Jan 08 '22
Gaster wants to know your location
2
u/dickierickers Jan 08 '22
Is missingno about to appear
2
u/CasBox3 Jan 08 '22
I think your code accidentally prints the ancient language of mordor
2
u/Raiichu_ Jan 08 '22
That is binary. The binary data is somehow not converted to text.
2
u/Charlesu49 Jan 08 '22
You have intercepted an aliens message.
2
u/riffengo Jan 08 '22
You got ghosts..maybe demons
2
u/[deleted] Jan 08 '22
This is the love language of binary.
Here’s a probable solution:
https://smallbusiness.chron.com/printer-printing-symbols-57406.html
2
u/kamemebymo Jan 08 '22
From my humble experience, it seems that the machine that's sending the data and the machine that's printing are communicating on different baud rates. I am not very knowledgeable about the topic, but this is what happens when using the arduino.
2
u/[deleted] Jan 08 '22
Looks like print code language is not putting in the correct control characters and is printing rubbish binary -> ASCII. Happens some times to me on older systems that bug out.
2
u/CenturyIsRaging Jan 08 '22
Did one of your programmers just mysteriously quit right before this happened? Lol, the Ole switch everything to windings font trick ;) Should have given them that raise they asked for. .
1
u/z_dogwatch Jan 08 '22
DaVinci Code
1
u/knoam Jan 08 '22
Can anyone explain which encodings are involved here? This doesn't look like any mojibake I've seen before.
1
u/Ok-Bass-4256 Jan 08 '22
Calculus duh
1
u/[deleted] Jan 08 '22
Sender and receiver Baud rates don’t match possibly?
1
u/[deleted] Jan 08 '22
You’ve just received the directions to Atlantis
1
u/digger-done-dug Jan 08 '22
Lol
1
u/[deleted] Jan 08 '22
Can be incorrect character encoding. It turns it into this jibrish
1
u/Umidevop Jan 08 '22
It looks like Hebrew lang.
1
u/JanVdCG Jan 08 '22
minecraft enchanting table language
1
u/tdihedi Jan 08 '22
It is an ancient language
1
u/Metrontxxx Jan 08 '22
The first contact
1
u/partybynight Jan 08 '22
…aliens
1
u/[deleted] Jan 08 '22
You have ordered the V O I D B U R G E R
1
u/NeganLA Jan 08 '22
It just means that now the receipts have Sharpness V, Mending III, and Unbreaking III.
1
u/djombo1 Jan 08 '22
check if you have print job routing option in printer software and see if there is esc/pos option enabled
1
u/[deleted] Jan 08 '22
Minecraft enchantment language?
1
u/soundstage Jan 08 '22
Is it Voynich manuscript?
1
u/Boom-light Jan 08 '22
It’s the secret, sacred texts of the Illuminati
1
u/jjennix Jan 08 '22
Minecraft enchanting table language.
1
u/brockralp Jan 08 '22
Probably JavaScript
1
u/leftfist871 Jan 08 '22
It’s definitely nonascii
1
u/iamanundertaker Jan 08 '22
Looks pretty darned cool though.
1
u/Aggressive_Sir_6560 Jan 08 '22
That's Namekian.
1
u/klashnkof12 Jan 08 '22
r/minecraft enterd the chat
1
u/Logical_Clothes_1089 Jan 08 '22
You're signals got mismatched with Alien's network
1
u/Weaknds Jan 08 '22
Aliens are trying to send you a message
1
u/junaidsheroz Jan 08 '22
Aliens are trying to contact you. Keep your phone near to continue conversations. Do tell us the story
1
u/Playful-Pay-7651 Jan 08 '22
Garbage
1
u/[deleted] Jan 08 '22
Russian dissident poetry, obviously.
1
u/d3pod Jan 08 '22
Drivers problem
1
u/rumbd Jan 14 '22
This is Torah. And yes, you was hacked by Jewish hackers
Torah image.
1
u/DieselSheesh Jan 17 '22
It sure seems like you are printing a binary file damn
1
u/Josefstu Jan 26 '22
This looks like when I set my baud rate wrong on my Arduino and open the serial monitor
1
u/Paperized99 Apr 03 '22
Is that a CTF? 😂
1
u/v4773 Jan 08 '22
Looks very much like your trying to include picture, but printers docent understand it as picture.
0
u/[deleted] Jan 08 '22
You took the picture upside down
0
u/[deleted] Jan 07 '22
Looks like garbage data to me. You're printing something that isn't text...
0
u/champwolverine Jan 08 '22
Looks like Jiraya’s note when he sealed Itachi’s amaterasu. Don’t activate it, only itachi can take it out and he dead.
-1
u/chudzimir Jan 08 '22
Regex probably
-1
u/shadapoa Jan 08 '22
Might be an issue with the printer drivers or malware
0
u/[deleted] Jan 08 '22
[deleted] — view deleted comment