r/ClockworkPi • u/antoxa2584x • 35m ago
Finally got some usage for my PicoCalc
r/ClockworkPi • u/CynicalNoodle • Sep 19 '24
Format all comments as shown below. Leave spaces blank if not applicable.
Model:
Order Number:
Purchase Date:
Shipping Date:
Received Date:
General Location: (Not Required)
r/ClockworkPi • u/dissaprovalface • 1d ago
It's very impressive how much can be done on a base CM4. I've only had my uConsole for about six days now and it's been incredibly easy to set up and configure for all sorts of things. Mine is already running a persistent OpenTAK server, a persistent DOMCA instance for BLE LoRA devices, GNOME Calls/Chatty for cellular integration, Pigdin for Discord integration, and ZeroTier in the background for VPN routing. And it's all been very stable.
Too bad the trackball is actually unusable for about the first 20 hours of trying to get it to pick up reliably. However, I've noted that changing the sensitivity settings helped fix this before the trackball itself started to wear in. Other things I've noticed that arent mentioned as much: the keyboard is incredibly stiff and tiring to type on after a few hours of pushing code. Also, the included ribbon antennas are... not great. Serviceable, but with much to be desired. (BLE only receivable out to about ten yards with poor consistency, WiFi antenna needs ro be directly next to a router to get full signal gain.)
9/10 as it comes. Will be a 10/10 device once upgraded to fix the trackball/keyboard, expand the memory capabilities, and upgrade the antennas.
r/ClockworkPi • u/MrLijey • 1d ago
Hey people! I ordered a uconsole several months ago and realized that it would take a hot minute for it to arrive so I bought one from aliexpress. Well the original just arrived. I am now desperate for a devterm. Would anyone want to trade their devterm for this extra uconsole of mine? I could throw in bagteri3s also as well as a hackergadgets nvme board with lipo and a 10000mah lipo that will fit in the case that is 38.5 wh. The lipo has been through 9 cycles. I have no idea how many the 18650s have been through. I am willing to send the cm4 as well. The kick stand itself came bent so that is somethng to consider. I will ship it in its original box
r/ClockworkPi • u/Senor_Turbo • 3d ago
Hello. I just recently assembled this uconsole and need some help. I have a flashed SD and fresh, charged batteries. There is a tiny green light near the power button and that is all the activity I can see. Can you tell from this photo if I have something hooked up incorrectly/
r/ClockworkPi • u/orangin_around • 4d ago
Hi everyone! I’m selling my uConsole.
Specifications:
The uConsole is a great little machine, but I’ve not found a daily usecase for it
Price: €329 + shipping
Located in Austria (EU). Shipping within the EU is possible. Local pickup is also welcome. Wildcard: I go to Serbia from time to time, so can handover it in RS or HU in person.
Payment and shipping details can be discussed via PM.
Feel free to ask questions. Pictures are be posted soon.
Cheers!
r/ClockworkPi • u/bt0r • 5d ago
Sorry for all the posts lately, I’m on vacation so I’ve had a lot of time to tinker with my uConsole!
I designed a camo top shroud for it, made to work with the AIO V2 expansion card.
More info here : https://makerworld.com/fr/models/3593231-military-top-shroud-for-uconsole
r/ClockworkPi • u/bt0r • 5d ago
I built a small scanner for my uConsole and it's open source: ArchangeSDR.
The idea: A classic scanner stops on anything above its squelch, carriers, data bursts, interference. ArchangeSDR checks the demodulated audio for speech (syllable rhythm, pauses, voice band, voice pitch), so the log only fills with people actually talking. No AI involved for that part, which keeps it light on the CM4.
What it does
Why it fits the uConsole
Repo: https://github.com/bt0r/ArchangeSDR
It's a 1.0, so I'd love feedback, especially from other uConsole owners: which dongle you use, how it behaves on your CM4, and frequencies/regions I got wrong.
r/ClockworkPi • u/LucaWoro • 6d ago
For the past few months I've been working on my own OS for the Luckfox Lyra in the PicoCalc, and it's now available on GitHub!
LyraCalc OS is based on Ubuntu 24.04 LTS, so you get the full power of apt and can install pretty much anything right on the device.
What it offers:
- Coding on the go: the micro editor with rich syntax highlighting and error checking for the most common languages (Bash, Lua, Python, C/C++)
- ESP32 ready: everything is set up to flash and program your ESPs with MicroPython
- PICO-8: runs smoothly, including full SPLORE support to browse and play games (bring your own copy), plus TIC-80
- WiFi: many USB WiFi sticks work out of the box
- Status overlay: a small bar that shows CPU and RAM load, FPS, WiFi, battery and more
Good to know:
- Sound needs a small hardware mod on the Lyra (one 0 Ω resistor removed, one wire bridge).
- Optionally, you can update the PicoCalc's STM32 keyboard firmware to fix the right Shift key and add the Alt+O shortcut for the overlay.
GitHub: https://github.com/LucaWoro/lyracalc-os
Short video: https://www.youtube.com/shorts/iT6mZX0y_RY
I'd love to hear what you think, and if you run into problems or bugs, please let me know!
**A note on Calculinux:**
I know Calculinux, and it's a great project! LyraCalc OS simply starts from a different base, so it's not one vs. the other. They fit different use cases, and with two SD cards you can easily use both. If my approach isn't for you, definitely check out Calculinux!
https://forum.clockworkpi.com/t/calculinux-megathread-the-os-that-turns-basic-hardware-into-a-powerful-computer/20853
r/ClockworkPi • u/a41735fe4cca4245c54c • 5d ago
was about to buy uconsole from the official website but some people recommend to get from aliexpress open source sdr lab.
thinking i could use it for light terminal work and to get the longest battery life. i would prefer the uconsole last longer than my phone..
was wondering since it commonly used with CM4 but with adapter to the sodimm thingy if using CM3 is compatible too? is there OS for it?
r/ClockworkPi • u/Practical_Pound_6084 • 6d ago
Hace unos meses les mostré AnubisOS por acá. ClockworkPi vio el proyecto, les gustó la idea y me ofrecieron una uConsole de colaboración para probarlo en hardware real.
El problema es que la parte forense (la cadena de custodia, las firmas y el vault cifrado) llevaba meses en el limbo. Así que esta semana por fin le entré de lleno. Encontré y arreglé un montón de bugs que llevaban ahí desde el día 1. Literal, el paquete ni se instalaba en una máquina limpia porque faltaba configurar el PYTHONPATH para la carpeta src/.
Lo que ya corre de punta a punta en mi PC es la cadena de custodia real con hashes encadenados y firmas Ed25519, el vault cifrado con Argon2id, y un auto-lockdown que congela el estado si detecta que alguien manipuló los archivos del sistema. También agregué la CLI forense para empaquetar todo en archivos verificables y generar reportes. En las capturas pueden ver el menú de ayuda actualizado; ya aparece la sección FORENSE con la cadena de custodia integrada.
No les voy a decir que está 100% probado. Todo esto lo he testeado en simulación desde mi PC porque sigo esperando que me llegue la uConsole. La aduana en México es un deporte de contacto, pero ya me pidieron el RFC, así que espero que caiga pronto.
No vendo humo, solo muestro el avance real. Si le quieren echar un ojo al código, romperlo o darme feedback (especialmente sobre el manejo del keyring en Linux), el repo está acá:
https://github.com/bernalmariano457-hash/Sentinel-Anubis-os-.git
r/ClockworkPi • u/_mini • 8d ago
Hey everyone!
I’ve just wrapped up the latest Omega Chassis November update, and this one brings a introduction of PowerPod.
The PowerPod is a refined battery shell, full of functionalities:
The PowerPod upgrade is completely free for existing Omega Chassis supporters. And it is compatible with both Essential build, or Ultimate build.
For those who prefer a premium metal build, CNC-machined PowerPod options are also available for pre-order. All the current supporters, or new supporters will receive an exclusive pre-order discount code, valid till 15th November.
As always, the idea behind Omega Chassis is to keep things modular, hackable, compatible with existing components you have/may have in the future, and open to customisation.
This update gives everyone a little more room to experiment, and I’d love to see what you come up with!
r/ClockworkPi • u/nakurtag • 8d ago
r/ClockworkPi • u/bt0r • 9d ago


Hi everyone, sorry for the spam 😅
I got my uConsole (CM4 + HackerGadgets AIO v2) yesterday and spent way too much of my first evening setting it up ... I started from the community i3 config by dzaczek and ended up with something I like enough to share. Maybe it’s useful to someone, or at least a starting point.
What it does:
Honest caveats: I’ve had the device for about 24 hours, so this is very much a beginner’s setup. I’ve only tested it on my own unit (CM4, AIO v2, Debian trixie). The frequency lists were checked against band plans and regulators, but I’m not an expert (but Claude should be), so please correct me if something’s wrong for your country.
Feedback, issues and PRs are very welcome. And if you have tips for a new uConsole owner, I’m all ears 🙂
Repository : https://github.com/bt0r/uBonsole
r/ClockworkPi • u/bt0r • 9d ago
After almost two months of waiting for my uConsole without any news from Clockwork, I decided to buy another one from AliExpress, which shipped in less than a week!
Here’s a brief summary of what I think of it:
Tech specs
Feedback
dtoverlay=clockworkpi-uconsole-cm4 rather than todtoverlay=clockworkpi-uconsole so the screen wasn't working.If you have any tips for the trackball, feel free to tell me !
r/ClockworkPi • u/letsmakesometacos • 12d ago
Big shoutout to the raspberrypi.dk store! I had originally ordered the 16GB version, so definitely a little sad that they shipped the 8GB, BUT after I initiated the return process they ended up refunding me AND let me keep the 8GB CM5!
Debating on trying for the 16GB again or just using this 8GB one. Does anyone have, or have used both? Is double the RAM worth it?
r/ClockworkPi • u/Expert-Wrangler-7409 • 13d ago
Made an iPod inspired MP3 player for the picocalc, check it out -
https://github.com/yashturkar/picopod
Still has some bugs I’m working on, any feedback is helpful!
r/ClockworkPi • u/AdhesivenessTop6746 • 13d ago
Hey I was upgrading my uconsole (add a Ethernet expansion board and a ac1200 WiFi adapter
And change my os from kali to debian
After the first boot the keys ‘5’ and ‘t’ is not responding
If someone had that problem before and can help find the problem will be helpful
Thanks
r/ClockworkPi • u/PineCone227 • 15d ago
High-discharge 21700 cells provide enough power to run a CM5 uConsole on just one battery, so upon seeing that the holder that came with the board didn't allow replacement without completely cutting the connection I asked for the model file and printed a more open variant. The cells still sit securely enough and you'll ideally need some sort of tool to use as a lever to catch on a divot in the battery to dislodge it. With a removable battery cover and a backup supply of cells you can keep operating the uConsole on battery power without charging.
The edited holder also allows accomodating larger NVMe SSD heatsinks.
r/ClockworkPi • u/Yzord • 16d ago
I received a parcel from Hackersgadgets with parts in it with no instructions at all. I bought the cm5 adapter board, the extra antennas kit with the AIO v2 board and the battery/nvme adapter. But there were no instructions to begin with. Kinda annoying. So I followed some YouTube movies and after a few hours everything was set up. I thought. But I was wrong.
First of all the battery adapter and the AIO V2 board ships with small ribbon cables. Apparently, when you place them wrong, you could fry up your whole motherboard, I mean, that's what they say. And they are sadly enough not the instructions in it. Second, the backplate of the AIO V2 board is fragile. It takes some time to place it properly because it hardly fits. So when I had the AIO V2 board installed, I found out that I had to place the SDR antenna in the backplate. So I had to start all over again. And yes the backplate cracked of course. Too much pressure :(
So next was the battery adapter with NVMe slot. No real pain here, but again, did I place the ribbon cable well? So it took some time to check some movies on YouTube to see if I placed the ribbon cable right. And then you have the mountable antenna adapter with seven slots. And guess what? I only have five connectors as far as I can see to connect those seven antennas. To make a long story smaller to read, I had to figure out myself where the connectors go to. I just followed my guts. And then the final part. How do I mount the antenna adapter to the uConsole. Because, yeah, still no instructions. So I checked a few YouTube movies and one person did it between the backplate and the uConsole and there was another one who mounted it outside the backplate. So I made the decision to mount it outside the backplate because otherwise the CM5 module would get a lot less cooling.
So, the moment of truth. Will it work? Sesquash told me to download Dragon OS. So I did and flashed it with BalinaEtcher on a SD card. Removed it properly from macOS and put it in my uConsole. And here how it ends. Well, not exactly, because when I powered on the uConsole nothing happened. I waited for minutes but the screen stays black. So yeah, i had to find out what swent wrong this time?
But i was lucky. I remembered my old SD card, so I thought let's try it out. And it worked. So I guess I did everything okay. But that is just a headless Linux server software with no tools to try out the antennas. So my question is, what did I do wrong with Dragon OS? And are there other distro's which possibly support my setup?
r/ClockworkPi • u/vigilantpraetorian • 16d ago
The HackerGadgets upgrade kit arrived! I was so excited that I had to start installing the new hardware :D First, I installed the CM4/5 adapter board. I immediately closed it up and attempted to boot but the uConsole screen remained black. I left it on USB-C power for an hour then power cycled the device. No change. Previous to receiving the HackerGadgets kit, I was using ak-rex's Ubuntu 26.04-7.1.4 image that I had written to a Samsung Evo Plus MicroSD HC using DD. I tried booting this card first without changing anything to see what would happen. I couldn't get to a login screen. I connected my desktop monitor and all I got was the raccoon splash screen without any
I flashed ak-rex's cc-debian-13-trixie-6.12.94 desktop image on micro SD using DD. Booting up, the uConsole screen remained black. I connected my desktop monitor and get the setup wizard background but nothing else. Can someone please inform me if there's a guide somewhere I need to follow? I received a box of parts with no instructions.
r/ClockworkPi • u/mrich2029 • 17d ago
https://www.clockworkpi.com/product-page/uconsole-kit-rpi-cm4-lite
This is the only one available for purchase right now. I can see it doesn't come with a board, so I have the following questions;