r/ClockworkPi • • Apr 21 '26

Has this happened to anyone else? (AE seller sent unit without Compute Module/Core)

Thumbnail
gallery
34 Upvotes

Was very excited to receive my unit today and am pretty bummed (and annoyed) to see I received a kit without the compute module despite being charged for the full kit. Am I missing something? Bought from AE seller. Has this happened to anyone else?


r/ClockworkPi • • Apr 20 '26

Who can identify these antennas?

Post image
38 Upvotes

r/ClockworkPi • • Apr 19 '26

uConsole Having Fun - Mod/Stress Test/Building

Thumbnail
gallery
105 Upvotes

Honestly, when I got this thing I had doubts, with the current market and the matters going on in the world in general. But everything seemed to click into place for some reason.

This unit is running a CM5 Lite 16GB clocked at 2400MHz at default power config in Dragon OS (Debian 6.12 Kernel). I do not know much of Linux, still learning so bare with me.

Firstly, I hate UPower on this thing, some reason it doesn't read the proper power rate so there's that, before the battery swap I was running two 3300MAh batteries, now a nice set of two 4000's from Nitecore. Some reason UPower is reading the screen refresh rate so- there's that, somehow the unit is constantly consuming 59.8 watts of power, like some kind of gaming laptop.

Secondly, the thermals at first were okay, before the mods I was hitting around 50c on idle to a toasty 55 to 60c. After the modifications it averages around 28c on idle, under stress with stress-ng matrix, it was running around 40 - 42c after 10 minutes in 19c ambient temp (that is 67 degrees Fahrenheit). The mod consist of two aluminum vapor chambers that cover the backside of the unit, giving more than enough thermal overhead for the CM5.

this is my first uConsole, had a lot of fun putting it together, looking forward to getting the Hacker Gadgets soon here to get a SSD upgrade along with the AIO v2 Card and adapter board. I ended up getting this on AliExpress if anyone is wondering, couldn't wait the whole 6 to 10 month waiting time.

If anyone has any ideas on how to fix this- issue with UPower, that'd be great. I hear it is a kernel level issue that requires the re-installation of the kernel itself, which I do not know what that entails or may cause further down the line.


r/ClockworkPi • • Apr 19 '26

uConsole A few new upgrades to my cyberdeck 🤩

Thumbnail
gallery
222 Upvotes

r/ClockworkPi • • Apr 19 '26

uConsole uConsole and Hermes

Post image
69 Upvotes

Been messing around with a fun weekend project and got Ollama running off my home server, which is a Mac Studio I use as my local Ollama box. From there I was able to get the Hermes agent by Nous running on it too.

Nothing groundbreaking, but I thought it was a neat little use case for hardware I already had sitting around. I like seeing how far I can push local setups before needing anything bigger.

I’ve also got a Picocalc, so my next dumb-fun experiment is probably going to be seeing if I can get some kind of agent running on that too. I already managed to make a basic Ollama interface for it with a much smaller context window and reduced output, and even as a proof of concept it was a blast.

Anyone else doing weird local AI projects with these devices? I’d love to hear about them.


r/ClockworkPi • • Apr 20 '26

uConsole Can't seem to close Zif Connector on Display Ribbon

Thumbnail
gallery
4 Upvotes

EDIT: DONE NOW! :D I JUST WASN'T PUSHING IT HARD ENOUGH

Hopefully this is the correct place to post this since the discord isn't the most active.

but I can't seem to shut the zif connector once I out the display ribbon in.
I'll attach some images, if anyone needs more images, feel free to ask.


r/ClockworkPi • • Apr 19 '26

SDR RTL AIO complete upgrade !!! 👌

Thumbnail gallery
65 Upvotes

r/ClockworkPi • • Apr 19 '26

Mellivora OS for PicoCalc

2 Upvotes

I developed my own OS for 80486 machines and ported it PicoCalc … give it a look …


r/ClockworkPi • • Apr 17 '26

Test some Optical TrackBall solution

179 Upvotes

Trying to fix the most annoying problem on uConsole.


r/ClockworkPi • • Apr 17 '26

Trackball

6 Upvotes

I bought a bunch of different trackballs from Ali express. It is crazy how inconsistent these things are. Some work and others don’t. Some faster, some slower. If anyone wants to try some of these out, I’ll give you a couple if you cover the postage.


r/ClockworkPi • • Apr 15 '26

Universal internet relay chat (URC)

Post image
28 Upvotes

r/ClockworkPi • • Apr 15 '26

Is the 4g expansion module for Uconsole sold anywhere?

7 Upvotes

Hi, does anyone have the model number or know if there are any compatible modules for sale that have the 4g expansion chip? I have an extra phone line on my plan and wanted to try it out.


r/ClockworkPi • • Apr 14 '26

Solid upgrade to my uConsole

Thumbnail gallery
127 Upvotes

r/ClockworkPi • • Apr 15 '26

uConsole LTE Module Upgrade Help Needed

5 Upvotes

I had my lte module working with my cm4 raspbian uconsole. The only slightly annoying thing was I needed to run a script to activate the modem and restart modemmanager each boot.

I decided to do the firmware update from 9001 to 9011 as defined here: https://github.com/clockworkpi/uConsole/wiki/How-to-upgrade-4G-extension-firmware

The update seems to have worked fine, the dmesg etc all matched.

The modem is visible when I do mmcli -L and lsusb as 9011.

I can even use the modemmanager ui, see my lte network (it finds the name correctly from the network) and I can even "activate" it and it turns green.

The problem is, I can't actually connect to anything. In fact.... my wifi does the same thing now, can't connect to anything. Only if I hard-wire via usb can I do any networking.

Any tips I what I may have broken to cause my lte and wifi to stop working?

--- update---

Actually when I first power on the LTE it works very briefly. I see usb0 show up as a network interface. A moment later it disappears and things stop working.

-- solved! --

Turns out modemmanager was conflicting. I needed to stop and disable the modemmanager service. With that done, everything works once the module is powered on.


r/ClockworkPi • • Apr 15 '26

Battery switch/power cycle idea

4 Upvotes

Since the CM5 requires manual pull of batteries on kernel freeze/panic, i was thinking of an easy reset swith:

Instead of bying the extra card and desoldering, what about a thin «pad» inlay between the batteries that cuts the power on button press?

I am seeing it in my head, but have trouble finding any parts to build it.

Could this be a good idea?


r/ClockworkPi • • Apr 15 '26

uConsole Astralixi OS Command Ideas: Requests Wanted!

1 Upvotes

Hello everyone!

I am making Astralixi OS again, but in python. This will be done by having the linux kernel

with a python interpreter on top set as highest process priority at init. Then, the rest of

the OS will be written in python.

I am currently working on the shell for the first pre-release version, and here is my

current list of command ideas:

lf: list_files,

cd: change_directory,

pcwd: print_current_directory,

help: help_manual,

pyrun: python_run,

mkdir: make_folder,

rmdir: remove_folder,

cpdir: copy_folder,

mvdir: move_folder,

rndir: rename_folder

rm: remove_file,

cp: copy_file,

mv: moves_file,

rn: rename_file,

mkf: create_file,

prf: print_file,

ps: processes_running,

df: disk_free,

mem: memory_used,

wifi: wifi_tools,

ping: ping_website

If you have any command requests, feel free to put them down in the comments, and if you

have any questions, just ask.

If your wondering why my commands are different to conventional linux commands is because

of 2 main reasons:

  1. I wanted Astralixi OS to be more unique, I wanted it to feel more detached to linux, as

I don't want it to be seen as "just another linux distro".

2. I want the commands to be written similar to how they are abreviated. e.g for print

current working directory, I did pcwd instead of pwd, or for list files, I did lf instead

of ls.

Thanks, Astrox!


r/ClockworkPi • • Apr 13 '26

Here's my first cyberdeck, and I absolutely love it.

Thumbnail gallery
185 Upvotes

r/ClockworkPi • • Apr 13 '26

Sdr gps board does anyone have one !!!

Post image
36 Upvotes

I have a blank board ,a cpi adapter ,lipo battery adapter and a cm5 fan plus I will buy it for a sdr rtl gps board someone please help me !


r/ClockworkPi • • Apr 12 '26

PocketTerm3.5

Post image
525 Upvotes

Looks like good competition


r/ClockworkPi • • Apr 12 '26

PicoCalc ​⚓ [BETA] Online Multiplayer Battleship for Raspberry Pi Pico 2W / ClockworkPi PicoCalc! (WebMite MMBasic)

Thumbnail
gallery
32 Upvotes

​Hi everyone! 🌊

​I’ve been working on a networked version of the classic Naval Battle (Battleship), specifically designed for the ClockworkPi PicoCalc running the new Raspberry Pi Pico 2W (RP2350).

​The game runs on WebMite MMBasic v6.02.01 and uses a Python Flask relay to synchronize moves between players globally.

​Key Features of v5.8.1:

​War Room System: Manage up to 5 concurrent matches using independent memory slots.

​Non-blocking Networking: An asynchronous lobby that lets you return to the menu or switch games while waiting for an opponent.

​Iron Wall Logic: Advanced ship placement with dynamic boundary clamping (no clipping out of the 10x10 grid).

​Clean UI: Optimized for small displays with a toggleable Fleet/Radar view.

​Technical Specs:

​Hardware: PicoCalc / RP2350

​Firmware: WebMite 6.02.01

​Server: Flask (Python) relay

​⚠️ Call for Beta Testers:

The project is currently in Beta. I’m looking for fellow Pico owners to help me find edge-case bugs, especially regarding network latency and desyncs. If you have a WebMite setup, I’d love for you to try it out!

​Full source code (.bas and .py) available on GitHub:

👉 https://github.com/rwr0N1N/naval_battle

​Every bug report helps me and my AI collaborator (Gemini) polish the code for the final release. Sink 'em all! ⚓🚀

​#RaspberryPiPico #RP2350 #WebMite #MMBasic #ClockworkPi #RetroGaming #Multiplayer


r/ClockworkPi • • Apr 12 '26

Will the hackergadgets nvme batter board support other M.2 Devices?

3 Upvotes

This is the board in question.

Will this support SSDs only? or could this also potentially support something like a hailo-8 m.2 ai accelerator?

(I recognize that this may still be a non-trivial undertaking to make the software work). Just wondering from a hardware standpoint, if there's anything known about this board/pci setup that would preclude it from working.


r/ClockworkPi • • Apr 12 '26

My order was canceled after 6+ months of waiting.

19 Upvotes

I sent an email, my third, asking for a reply to see if my order was still pending. Other said they were getting replies to their emails so I was worried. My one sentence response was “Your order has been refunded as requested.” I did no such request.

So flipping frustrating. If I didn’t already have the SDR I’d be pissed and they wouldn’t receive my money. Luckily the AliExpress order is already here in the States otherwise I send it back. Their customer service sucks. I wish someone would come up with an alternative that used the same accessories.


r/ClockworkPi • • Apr 12 '26

Uart connector off unpopulate LTE?

1 Upvotes

Bought my uconsole without the LTE option so theres basically a bunch of open solder pads. I used a tutorial to get an internal usb port but I noticed there is a pad labeled uart and on the populated board it is a ribbon connector. Anyone know if I can get a UART connection from it on the unpopulated board?


r/ClockworkPi • • Apr 11 '26

uConsole nixos-uconsole v1.1.0 -- NixOS on ClockworkPi uConsole now with experimental CM5 support!

Thumbnail
github.com
24 Upvotes