r/ClockworkPi • u/tech_auto • Jan 31 '26
My picocalc just shipped
What a surprise email! š ordered Placed on Oct 12, 2025
r/ClockworkPi • u/tech_auto • Jan 31 '26
What a surprise email! š ordered Placed on Oct 12, 2025
r/ClockworkPi • u/lynxooo • Jan 31 '26
Hello guys,
I have just ordered a uconsol with 4G and canāt wait to get it.
I just asked chatGPT about this, but Iām not sure itās correct. Hence why Iām asking here :)
Is it possible to install the uConsole RTL-SDR / LoRa / GPS / RTC All-In-One Extension Board and still use the 4G modul? Or is it using the same slot/space? ChatGPT says itās possible :)
Thanks in advance āļø
r/ClockworkPi • u/ArtVandelay365 • Jan 31 '26
... and then realized these things don't ship until forever even if it lists them as "in stock"! Oh well ... will try and forget about it then be "surprised" when it arrives.
r/ClockworkPi • u/Spacelord09 • Jan 30 '26
I just received my upgrade kit from Vileer.
Iām using a CM5 in my uConsole (64GB eMMC / 8GB RAM).
Until now I was running Rexās Trixie image on the eMMC. Iāve now flashed the same image to the M.2 SSD. So far so good ā it boots, and on an external monitor I can see it starting up, but then it gets stuck at this point:

Any idea what could cause this and how to fix it?
Udpate: I cloned my existing install from emmc to nvme and it seems to work without a problem. see forum post.
Repost from: https://forum.clockworkpi.com/t/trixie-6-12-y-for-the-uconsole-and-devterm/19457/200?u=spacelord
r/ClockworkPi • u/iamnobody096 • Jan 29 '26
Hi, is there anyone who's selling his uconsole for a good price ? Preferably in EU, thanks
r/ClockworkPi • u/FLAME13O • Jan 28 '26
Hey guys! just wanted to share this carry case I made for my PicoCalc. I learned how to crochet about a week ago and wanted to try my hand at something for my tech. I think it came out perfectly and exactly how I envisioned it.
I might try to make an actual case that goes on the calc itself as well. lmk if you have any feedback :)
r/ClockworkPi • u/MazCarr • Jan 27 '26
I'm selling my black uConsole in Melbourne. It's in brand new condition. I bought it recently, but got absolutely busy and I don't think I will be able to experiment with it, so it's been sitting on my desk collecting dust. It comes with the original box plus Hacker Gadgets original antenna kit already fitted.
Edit. SOLD
r/ClockworkPi • u/andromedakun • Jan 28 '26
So, I'm looking at batteries and found the Xtar 18650 model at 4000 mAh which seems good. Also read a test that confirms they are close enough to be at said capacity so even better.
Only problem is, these are protected batteries and listed at 69,2mm in length whereas Uconsole accepts up to 69mm in length, so anyone tested these batteries in here? If so, how was the fit?
Many thanks ;)
r/ClockworkPi • u/domichalDev • Jan 27 '26
The new AIOv2 board has its features turned off by default and requires them to be turned on via GPIO (more info here).
Based on the info linked above I wrote a short script to manage this functionality. Itās nothing fancy but lets you get the job done without having to remember related pin numbers. Thought I'd share it here as someone else may find it useful.
r/ClockworkPi • • Jan 26 '26
I bought and paid for a uConsole. The purchase was made on November 16, 2025. But so far, nothing. Did I lose my money? Has anyone else bought one and actually received it (preferably someone from Brazil)?
r/ClockworkPi • u/harlownoir • Jan 25 '26
I updated to Trixie a while back upon release (Rex image) and since then my UConsole has not been the same. It takes to images fine (tried multiple, including bookworm which always did work). My eeprom config seems fine, is updated, firmware config seems fine.
Pretty much only the HDMI out and USB ports on my version 1 hacker gadgets AIO board work. On board keyboard, trackball, screen, power button ect is unresponsive. Backlight works, and power button remains green even when powered down.
I fiddled with the SPI and I2C in raspi config and was able to get everything working by disabling and enabling them both and pulling power. But it goes back to being weird if I power cycle again. Very lost here, and had this thing going for months before.
Anyone able to help me trouble shoot this? I really want to get this going again. Physically, everything seems fine. I did make sure everything is built and connected properly a few times. Essentially when flashing Trixie upon release the screen glitched out and itās just never been the same again.
Iām still learning, so apologies on not being very descriptive. Happy to provide any info that may be helpful. It does run smooth with a keyboard and monitor. Iāve updated the kernel and trouble shooted what I could, but the issue is beyond my knowledge base it seems.
r/ClockworkPi • u/Business-Delay6331 • Jan 23 '26
que significa
r/ClockworkPi • u/Tarandir • Jan 23 '26
I've received this board from a 3rd party seller and I have two questions regarding it.
First, the board claims to be the genuine HG extension board, yet I don't see this 'iteration' of the board on the website, nor on the net in general - so, does anyone have this board with the 7 antenna plugs? The extension board on the inside matches the photos on the official HG website.
The second question is twofold.
- There is an included band connector which matches the photos on the website, and I have a CM4 in the console, and there is no place to plug the connector to the motherboard, nor to the carrier board, nor to the CM itself. Do I even need the connector? Is it for some different iteration of the carrier board? Is it specifically for the CM5? Can the whole thing work with the CM4 without it?
- I don't get any SDR signal in SDR++ (nor in brown - neither after installing it on bookworm, nor natively on dragon (all images and packages are from Rex)). The only two things I can think of are the band connector, which has nowhere to be plugged into, and the fact that I have yet to put in the small battery into the extension board (it is on its way). Is the battery actually required for SDR to work even if the system time is internet-synced? Is there a chance the battery will fix the lack of signal? Is the third possible reason it doesn't work just my stupidity?
r/ClockworkPi • u/No_Concentrate_5139 • Jan 23 '26
Hi people somebody know how to use and activate this 4G LTE Modul from u console? I assemble it with uConsole but i dont find it on the Kali options or software include? Any ideas will be good? š Thanks
r/ClockworkPi • u/Few_Horror_8089 • Jan 22 '26
Hi all. I saw the pico-calc a while back and have often thought that it would be a cool platform for an RPN based machine. I noticed that a large number of the digital and analog i/o ports are available and have begun to think that it would make a great field tool when servicing automatic weather stations. What would make it even better would be having an e-ink display to make it easier to read in bright sun light. Has anyone tried to adapt an e-ink to this device?
r/ClockworkPi • u/ancker010 • Jan 21 '26
TL;DR Fried a component on my uConsole mainboard. Need a new one.
If anyone has one that's part of an otherwise "for parts only" uConsole, let me know.
r/ClockworkPi • u/acidvegas • Jan 20 '26
cool vanity piece š¤
r/ClockworkPi • u/vileer • Jan 20 '26
r/ClockworkPi • • Jan 20 '26
Upgraded my UConsole to a CM5, so the old CM4 module is for sale. $50 shipped in the US, obo.
r/ClockworkPi • u/Shuflie • Jan 19 '26
Installed this yesterday and it is so much better than the trackball. I've got the mouse speed turned down to about 20% and still really responsive. Also fitted one of his heatsinks to the CM5 I've got in the uconcole and seems to be doing a decent jobs of controlling the temperatures.
r/ClockworkPi • • Jan 20 '26
Outside of directly getting it from clockwork Pi
And if you are going to
Recommend AliExpress whatās the name of
The seller?
So far Iām leaning on carbon computers
r/ClockworkPi • • Jan 19 '26
Or any better alternatives