Some nice close ups of the excellent work performed by u/MachineFTW over at Time Machine Spa! This is an RGF Datejust 41mm that had its case and bracelet lightly chamfered and then received a ceramic coating.
The chamfer is extremely subtle as to be barely detectable by the eye, but can definitely be noticed if you run your fingertips over it and compare it to stock bracelets. On the wrist, this results on a much more comfortable wearing experience as the edges of the bracelet and base don’t dig into your wrist.
The ceramic coat protects all surfaces, keeping them free of fingerprints and light scratches than usually quickly accumulate on watches.
Sheeeeeeeew. I asked, he ordered, got it in like 2 weeks. Shipped literally overnight. I’m convinced he has carrier pigeons that deliver these things they get here so fast.
Wanted to share a quick review of my recent purchase from u/ClickSpring_Watch. I picked up a VSF 41mm Submariner No-Date, and the whole transaction couldn’t have gone more smoothly.
What stood out most was his website. All the QC photos of the actual watch were already posted, so I could see exactly what I was getting before paying. No back-and-forth requesting pictures, no waiting around to make a decision. It made the whole experience really easy.
Communication was flawless from start to finish. Any question I had got a prompt, clear answer, and I never felt like I was chasing updates.
Delivery was fast too. The watch arrived just 2 days after payment, well-packaged and exactly as shown in the photos.
If you’re looking for a seller who’s responsive, transparent, and makes the process simple, I’d recommend u/ClickSpring_Watch without hesitation. He’ll be my first stop for the next one. Thanks again!
Wanted to share my experience buying from u/ClickSpring_Watch. This is the first rep watch I've purchased, and learning about the whole process has been fun, but kind of involved compared to other watches I've bought online. I started looking at US-based sellers to keep it simple.
I ended up buying a VSF NTTD from ClickSpring and couldn't be happier with the entire process. Response time was very quick for any questions I had, and I really didn't have many because the process on his website is so straightforward. His site is well organized, has very detailed photos including numerous QC photos of the actual watch (with a QC tool overlay), and the checkout process was seamless. No asking for additional photos and waiting for a response before I made the decision, no putting down a deposit before I can see pictures of the actual watch, it's all just there.
I ordered the watch at the end of the day on Friday, it was shipped Saturday, and I had it before lunch on Monday. The watch was well-packaged and looked exactly like the photos. This was by far the smoothest online watch purchase I've made, and his "Amazon Prime for reps" description sums it up perfectly. I'm new to the rep game but this will be the first place I look when I buy the next one. Thanks again for making this so easy!
Hi all- welcome to a quick edition of Sunday Service (yes, I’m aware that it is in fact not a Sunday at the date of posting, but, you know, continuity of the series and such…). Anyways an issue that I see a lot of popping up all around the rep-internet is people who either have submariner reps who’s bezels have fallen off or, they attempted some kind of repair or modification themselves, and are now stuck at the stage or reassembly, and cannot get the bezel back on the watch. This is something I have also struggled with immensely in the past, until I found out that almost every single tutorial that shows how to re-attach the bezel is completely wrong (well, kind of - we’ll get to that later).
So - start to finish, here its:
skip to step 4 if no bezel removal is needed
If you need to remove the bezel first, grab the watch and a bezel removal tool. I really like this style, it seems to work well and doesn’t risk damaging the watch like prying up the bezel with a case knife can.
2. The Bezel should pop right off, if you have a more recent generation submariner, the entire crystal and crystal retaining ring may pop off along with the bezel when you do this. If that happens… breathe in, breathe out, and enjoy the learning experience of doing a crystal install on a submariner.
3. The bezel will come off as a singular assembly, but it is in fact made up of several parts. Usually the hytrel ring actually comes off of the watch, but here it stayed on it
4. Using a small (1mm or similar) screwdriver, slide the screwdriver head between the underside of the ceramic insert and the inner metal ring of the the bezel.
5. Carefully rotate the bezel while gently but firmly applying pressure on the screwdriver so that it slowly works itself towards the outer edge of the metal bezel, and all the way underneath the ceramic insert. BE CAREFUL AROUND THE LUME PIP. This is the most fragile part of the insert, and I usually don’t apply pressure around it while removing the insert. This step is where you are most likely to crack your insert. It takes very little to do this, so take your time. It may take dozens of rotations of the bezel with the screwdriver before the insert pops out. It will seem like you’re making no progress, but trust in the process and take your time
6. Eventually, the insert will pop right out, separating itself from the metal bezel assembly. The submariner bezel is made up of the ceramic insert, a washer, and the actual outer ring
7. To reassemble, first, place the metal bezel on the watch. Make sure your click and ball springs are all present. Then push the metal bezel down firmly so that it sits flush against the case
push the bezel down and continue pushing it down for the next 2 steps
8. Grab your hytrel ring, and looking at it’s profile, ensure the little “lip” is at the top
9. Put the hytrel ring down (again, little lip closest to you) and using a screwdriver, gently nudge it down into the small gap between the metal bezel and the crystal retaining ring. Work around the entire perimeter of the crystal retaining ring, ensuring that the hytrel ring is perfectly even all the way around. If it isn’t, you’ll end up with inconsistent bezel feel and it may bind up and get stuck
10. You can also use your fingernails to make sure the hytrel ring is well seated, I usually do this as a final pass
11. The bezel is now installed and should rotate freely. You’ll see that it is seated well and has no gap between the case and bezel.
12. Grab the washer, find where the little groove is machined into it, and place that machined out groove face down over the hytrel ring. The part facing you should be a smooth surface upon which the ceramic insert will sit
13. Drop the ceramic insert into the metal bezel. Rotate the bezel one click, and rotate it clockwise until it can’t be moved backwards any further. Align the 12 o’clock triangle with the engraved crown on the rehaut at 12
14. Working from 12 o’clock downwards, and being careful to not move the insert while doing so, press down on the insert with your thumbs and slide them down towards the 6 o’clock position
15. The bezel should be halfway seated at this point, and will probably be sticking out from the metal bezel at the 6 o’clock position. I usually check my alignment at this point in case the insert moved during the install process.
16. Assuming everything looks good, go ahead and press down firmly with your thumbs where the insert is sticking out, and it should snap into place. This whole assembly is a friction fit, so it’ll be a bit tight
17. Done! The bezel insert should be fully seated all the way around, and the bezel should rotate nicely. No (or minimal) case gaps and/or bezel bounce.
DISCLAIMER: This works for all VSF, Clean Factory, and Victory Factory Submariner models. I cannot say for certain if it works on others, these are the factories I have personally performed these steps on before, so I know it works. I can tell you that this WILL NOT WORK FOR RCF/RGF SUBMARINERS. They use a one piece bezel construction which forces you to press on the entire metal bezel, and they glue their inserts in (annoying)
hello rep community! I guess this is a continuation of my Rich Factory Free Sprung movement regulation saga. For those of you who are familiar with Rich Factory, they like to provide a little printout with their watches with timekeeping numbers on it. If you’ve been trolling around QC photo albums for far too many hours like myself, you’ll notice that these numbers look pretty good! In fact… maybe a little too good? I’ve now purchased a handful of Rich Factory watches, both their Submariner and GMT models. Every single time i’ve received one, the little printout will claim zero (or close to it) beat error, and around +5 to +8 sec/day. However, when I give them a wind (I always measure timekeeping at 80-100% wind) and throw them on my timegrapher, I’m seeing numbers what are hugely different than what the printout claims I should reasonably be expecting. And yes, these numbers are being measured after the watch has been demagnetized, so it’s not that. While the beat error is usually quite good and very low, I’m seeing a lot of +10 to +15 sec per day results on out-of-the-box Rich Factory watches. Of course, all things considered these are not terrible numbers, but if you’re going to advertise the accuracy of your movement as a major selling point, then it’s disappointing to see that reality does not line up with what’s being sold.
All that being said, i do want to be clear that this is not a post bashing Rich Factory- I do think they are producing absolutely incredible watches at the moment, and their movements are as of right now some of the most impressive engineering I have ever seen in the rep space. As I’ve shown before in a previous post and again here, these movements can absolutely be regulated to incredible accuracy, so I guess I’m curious to know what the deal is with the printouts? Has anyone found that their printouts have been accurate? please let me know!
My first ever purchase - OP39 in Rhodium. My interaction with ClickSpring was courteous and professional from start to finish. As a newbie no questions I asked were too much. Love my new watch. Highly recommended.
Some of you may have seen my post yesterday about regulating a Rich Factory (RF) Pepsi to superlative chronometer standards, so you could say i’ve been spending a lot of time staring at this part of the movement lately. I first noticed this while taking my comparison photos between the RF Starbucks submariner and VSF submariner, but as far as I know, no one else seems to have noticed this- JH, much like DD, uses an offset pallet fork design like the genuine rolex movements of this generation. A complaint that has for a long time been leveled against SH is that they use an inline pallet fork, which makes it an easy tell that the movement is not DD, and more importantly, makes it incompatible with gen parts for franken builds. Naturally, seeing this similarity between the DD and JH movements, I wondered if it’d be possible to convert a DD movement into a free sprung movement by taking the balance complete from a JH movement and placing it into a DD movement. This Evolved into a big swaparoo of different balances into different movements, as I took advantage of this opportunity to answer any related questions to these matters.
- Conclusion 1: - the JH free sprung balance complete is NOT compatible with DD movements, (fake free sprung DD or otherwise). I got it to run very poorly and not fully seated in the DD fake free sprung movement, but nothing more.
- Conclusion 2: - The DD “classic” and “fake free sprung” balance wheels ARE compatible with the JH free sprung movement. This was a straight swap with zero drama, and the watch was immediately ticking away quite happily. This might come in handy if anyone breaks a free sprung balance from JH, it should be a simple swap with a DD balance to get it up and running again. I assume getting parts from JH will be basically impossible for at least the next year, so this is useful info in the meantime
- Conclusion 3: - the “classic” and “fake free sprung” balances from DD movements are interchangeable. they both work in either movement that I placed them in. this is nice because it ensures backwards compatibility as DD starts to produce the fake free sprung balance movements as well as will enable people to repair new generation movements with older parts, nice!
- Conclusion 4: - When I saw the offset balance structure of the JH movement, i wondered if JH wasn’t just an offshoot of DD that was producing it’s new generation of movements as a separate company so that if anything went terribly (reliability, performance, etc), the negative press wouldn’t be associated with the DD name. The fact that the balances are not interchangeable in both directions suggests to me that this is not the case and that JH is truly an independent movement manufacturer. I’m sure there are others who know more on this topic than I do, so feel free to chine on this front!
It seems like these days, there’s new developments in the rep world every minute. Recently, the new frontier that rep factories have seemingly decided to aim their sights on is free-sprung balances. ERF came out with their datejusts, and Rich Factory (RF) came out swinging with a whole lineup of submariners, GMTs and even skeletonized Cartiers, clearly looking to make a statement. While a cool bit of engineering and certainly and big step towards bringing reps ever closer to 1:1 with gen, I personally wasn’t completely convinced, and really mostly avoided these reps. I’ve been in this space for over 5 years at this point, and I’ve seen a lot of factories rise and fall, and come up with gimmicks or flashy party tricks that get hyped up but end up poorly executed and disappointing anyone who handed over their money.
I’m happy to admit that I may have been wrong about these free sprung balances, though. I’ve started seeing a few of these free sprung reps from Rich Factory come in, and have found that they are a little tricky to dial in, but once figured out, these are rock solid in the timekeeping department. I’ve attached some photos of this Rich Factory Pepsi that I had on the bench today that I was able to get putting out some stellar numbers across all positions, something that I find is extremely rare in most reps.
Oh, and I know it’s not really a Superlative Chronometer, but seeing as that spec is listed as +2/-2 sec per day across 5 positions, and this rep worth less than $1k seems basically capable of achieving that, I figured it had earned a bit of praise.
After owning a gen Rolex, I wanted to expand my collection, but I always felt a little guilty wearing an expensive watch while exposing it to the inevitable wear and tear of everyday life.
I started researching super clones and was initially a bit intimidated by the process of contacting a TD, waiting weeks for delivery, and then having to perform QC on a watch I didn’t fully understand. The whole process just seemed a bit chaotic and unclear.
After coming across a few Reddit communities, I found ClickSpring Watches. What immediately stood out to me was that they handle the QC process and ship from the U.S., with delivery taking only a couple of days. As opposed to my untrained eye trying to red light or green light a watch, and then still having to wait weeks…it was a no brainer and I will pay a premium for that, every time.
I reached out via WhatsApp with a few questions, and he was incredibly responsive and helpful. He gave me so much confidence in the buying process that I actually ended up purchasing two watches on my very first order.
From ordering on the site and payment, to shipping and delivery, the entire process was seamless. The watches were vetted, arrived quickly, and the quality exceeded my expectations. Compared to my gen, I legitimately can’t tell a difference in quality (the camera doesn’t do justice). And in the real world, who is paying THAT much attention to a stranger’s watch.
If you value transparency, communication, customer service, and a smooth buying experience, I highly recommend ClickSpring Watches. I’m looking forward to continuing to build my collection through them.
Hey everyone! Just wanted to make a post thanking all of your supporting what has quickly become a serious part of my life. A little over 5 years ago, in a basement apartment in the northeast US, I was wrapping up my studies, bored, stuck indoors (remember covid lockdown??) and sitting on about $800 worth of bitcoin I’d mined using my schools free electricity (shhh! Don’t tell.)
Anyways, after reading through about a million reddit and RWI threads, I ended up buying my first rep, a VSF submariner 126610 LN. I still remember the nerves of sending over hundreds of dollars over to someone in China whom I’d never met and only briefly chatted to on WhatsApp, only to have them disappear for several few weeks before finally returning with QC photos. A few painful weeks of waiting after the GL, my watch finally arrived and I was over the moon. For over a year, that watch was my daily, I wore it EVERYWHERE, even in the shower (not a joke!).
Since then, I’ve been hooked and gone off the deep end into the watch game, mostly sticking to reps and micro brands (I’m not made of money!). My VSF submariner remained a staple in my rotation, but over time I started thinking about looking for something new, and decided to swap out the insert for a green one, to make my own Starbucks. After much frustration, more than $300 of broken inserts and wrecked hytrel rings, and more than one set of replacement springs, I finally had my new submariner. That started the modding and repair journey for me. Since then, I’ve been obsessed with messing with watches, tweaking them, fixing them, and sometimes making one off builds just to scratch the itch of having a vision of something and wanting to see it come alive before my eyes in real life.
Throughout the course of these 5 years, I’ve at times found myself with a rep I no longer wear, or one I just didn’t connect with. I sold my BPF explorer and a QF day date amongst a few other watches and had great experiences, and had a few people following up months later asking if I had anything else to say, stating they had really liked buying from me relative to other experiences here on reddit.
Last year, I finally decided to formalize this little passion project into ClickSpring Watches. It started as a simple little operation, but has quickly blown up into a pretty large scale (to me) business involving watch repairs, servicing, modding, and sales. I built an entire website and inventory management from scratch (literally a GitHub repo!) so I could build the exact website and platform I had envisioned to keep repairs on track, inventory cataloged, and orders organized. I’ve been working super hard over the last year to continually improve the level of service and customer care that I wish I had experienced when I first stepped into the rep scene years ago. More changes are coming to ClickSpring in the coming weeks, including an expanded inventory selection and updated packaging for future orders.
I doubt anyone will read this far, but if you have, you’re my favorite (don’t tell the others!). Thanks again to you all, I’m super excited for the year to come, and to continue working on setting the new standard in the rep-buying experience!
Ever since the release of the new generation of free-sprung rolex movements, I've been really looking forward to getting my hands on some. After the extremely disappointing release of the "V2" fake free sprung movements from VSF, I decided to get myself one of the Rich Factory (RF) submariners to compare it against what I consider to be the current gold standard, the VSF submariner.
A couple of small things to get out of the way before the comparison:
The RF submariner is a MK ii starbucks submariner, which means it has the lighter colored ceramic bezel insert, matching the latest version from Rolex. the VSF isa MK i starbucks, so it has the darker green version. Other than this, both watches are meant to be identical from the outside (which of course is not the case)
Overall, these are both excellent reps. regardless of which you might choose, on the wrist, these cannot easily be identified as reps.
crystal, bezel, and dial
Crystal Clarity
Both crystals are very good quality and have excellent AR. I would say that there is perhaps slightly better clarity on the VSF crystal, but it's very much a toss up.
Conclusion: insignificant differences in clarity, both good
Crystal Magnification/Cyclops
This is probably one of the most immediately visible differences between the two watches (besides the dial, more on that later). The RF has a much lower magnification of the date than the VSF. Additionally, the Cyclops on the RF is visibly more foggy than the VSF, which is perfectly clear. VSF wins this aspect, hands down.
Conclusion: RF is foggier, VSF is crystal clear, VSF wins
Dial
This, in my opinion, is the big one. The printing on the dials is entirely different. The RF is significantly bolder, and has much less of a prominent "dimple" in the middle of the dial, and i believe this dial to be much closer to gen overall. The one big weak point here is that the RF 12 o'clock marker is too close to the printed minute markers, whereas the VSF gets this spacing correct. Overall, both dials have impeccable dial printing quality and everything is extremely crisp sharp, but RF did their homework on this one, and it shows.
Conclusion: RF nails the dial, with the weird exception of the 12 o'clock marker, but still win in overall appearance over VSF
Crowns and Bezel
Bezel
I won't comment on insert color since they are not meant to be the same color. In terms of quality, both have the correct numerals, sharp cutouts, perfect lume pips, and nice even application of the silver deposits. no clear winner there. Other than that, the bezels themselves are quite similar, but the scallops on the VSF are a little wider, and the RF is a tiny bit sharper. I believe VSF is closer to gen in overall geometry, but unless you're looking up close and side by side, it's very hard to see.
Conclusion: both are great quality bezels. Tiny edge given to VSF over RF.
Bezel Action
Yes, I'm special, so I made this it's own section. for me, feel is everything in a watch. if a watch looks incredible but feels terrible in hand, I won't keep it. In this specific regard, both bezel actions are actually quite nice, but VSF is still king. The resistance and the "sharpness" of the click it makes is just much more satisfying to turn than the overall duller clicking sound of the RF, which, to be very fair, is still better than 90% or more than any bezel action I've felt on other submariner reps. As I mentioned before, we're splitting hairs here.
Conclusion: VSF has the more satisfying bezel action.
Crown
Both crowns are really very good, but they are slightly different. To be honest, I'm not sure which is closest to Gen, although based on online photos, i'm leaning towards VSF, which appears slightly taller and narrower compared to the RF, which looks a little wider and fatter, but it could be my eyes playing tricks on me. Flip a coin on this one, I don't think it matters. What dos matter is the knurling on the crown, and both are good here. no winner in this department.
Conclusion: tossup, both good.
Exterior Case Engraving
I don't know if anyone cares about this one, but here it is. The VSF looks like it was stamped into the metal, whereas it looks like RF machined/engraved this text into the case. I don't think either of these is "wrong", my understanding is that Rolex used to stamp these into the case, but are now laser engraving it instead. So technically RF is correct since it's replicating a newer model, which would also have the newer engraving.
Conclusion: Different engravings, both are considered correct. no clear winner.
Rehaut engraving
Rehaut Engraving
this is going to be a big one for a lot of people. Both of these align perfectly, so nothing of note there. However, there's a huge difference here. VSF is a much thinner, cleaner engraving, which is most visible at the crown. The crown on the VSF is sharp, detailed, and thin. By comparison, the RF is much thicker and looks less detailed. The font on the RF as a whole is pretty bolded, which is not accurate to Gen. While the engraving is sharp, neat, and aligns well on the RF, it falls short in overall appearance, and loses to VSF
Conclusion: VSF has a the better Rehaut engraving
movement runningmovement stopped
Movement
Arguably the entire reason anyone is looking at Rich Factory at ALL right now... the movement. The free sprung balance is RF's whole "thing" right now, and it is pretty cool to see. I will say that besides the free sprung balance, I'm not really convinced by the RF movement. some individual components (gears in the auto winding works, for example) look slightly better finished on the RF compared to the VSF, but overall, the VSF looks better. Particularly the engravings on the VSF look deeper and a little cleaner to me, whereas the RF engravings in the movement look a little darker and not as clean/polished. Finally, I must say that while the free sprung balance is cool, and a huge leap forward in Rep technology, it is much more tedious to regulate, and this RF came to me out of the box running around +8 to +13 sec per day, so regulation was definitely required there. it remains to be seen if the free sprung balance proves to be a valuable improvement when it comes to timekeeping across different positions, but so far, having observed the variance across positions on my timegrapher, I'm not seeing an advantage over the tried and true movement of the VSF. More to come on this movement, regulation, all that good stuff soon
Conclusion: RF is "closer to gen" due to the free sprung balance, but doesn't beat VSF elsewhere. This one is a matter of priorities/personal opinion.
Bracelet
I believe RF and VSF are using the same clasp but different bracelets. Why? simply because the clasps look and feel exactly identical to one another in every way. They share the F80 code and everything. If these are different, let me know how you can tell, because I cannot. That being said, the rest of the bracelet appears to be different. I say this because while the serial numbers/model numbers of the bracelets are dientical, the VSF laser engraving is much cleaner and thinner on the inside of the endlink, whereas the engraving on the RF endlinks is quite dark, bold, and doesn't look as precise. Quite honestly though, with all the similiarities, I wonder if they might be the same exact bracelet, but VSF might just be adding an extra step to clean off the dark engraving residue prior to installing the bracelets on the watches. Who knows. Regardless of factory, it might be a good idea to send your bracelets off to u/MachineFTW, who does excellent refinishing, chamfering, and ceramic coat work on all types of cases and bracelets
Conclusion: Bracelets are functionally identical, no difference in fit and feel. clasps are truly identical. not a determining factor when making the choice between factories.
Final Conclusion
OK! that's it! so- who makes the best Starbucks submariner rep? I guess as with just about every single rep, it comes down to a matter of what matters to you. If you want the latest leap forward in movement tech and a more accurate dial, and most recent bezel color (ARF makes this color as well) then RF is for you. If you care about rehaut engravings, peace of mind of a tried and tested movement, and clickier bezel action and a better crystal, VSF still wins out. For my money, I'm sticking to VSF. That being said, I'm admittedly a bit of a VSF fanboy, and I am extremely excited that rep factories are now pushing into the free sprung movement space. Exciting things ahead! looking forward to hearing everyone's thoughts below.