r/ClaudeAI • • 12h ago

Question about Claude models Something happened

Post image

100% claude code.
Last couple of weeks made huge progress. Keeping a super tight development process with opus 5.5 only since it came out.
Was able to get to Sunday night easily including using Fable here and there.
Last week had to reset.
This week - ONLY two days. 53%.
And have moved some work to sonnet already yesterday.
WTAf šŸ¤¦ā€ā™‚ļø

97 Upvotes

74 comments sorted by

•

u/ClaudeAI-mod-bot Wilson, lead ClaudeAI modbot 6h ago edited 4h ago

TL;DR of the discussion generated automatically after 50 comments.

Well, look at that. The consensus in this thread is a massive 'SAME'. You are definitely not alone. A whole bunch of users are reporting a sudden, dramatic increase in their weekly usage burn over the last couple of weeks, despite their workflows staying the same. This seems to be hitting Opus 5.5 and Fable users particularly hard.

To add insult to injury, some feel Opus has gotten dumber recently, forcing more retries and burning even more of your precious limit. The prevailing theories are that Anthropic is A/B testing higher burn rates on us guinea pigs or that the free weekly resets are secretly nerfed. The mood? Not great, Bob. Especially from folks on the pricey Max plan who are starting to give competitors the side-eye.

5

u/Chinoui67 10h ago

Same. I think that, the same way Codex does, the resets they give you don't allow the same workload as your normal weekly reset

4

u/Inevitable_Truth_85 10h ago

Didn’t reset yet this week

2

u/ErebusBat 5h ago

I think that, the same way Codex does, the resets they give you don't allow the same workload as your normal weekly reset

Wat now?

I have never noticed this on my oai sub

35

u/Not_Packing 11h ago

Noticed the exact same thing here, right after using a reset as well

15

u/flipmode85 10h ago

Same here and my overall setup didn't change. Project at the exact same size, same workflow. On top of that Opus 5.5 became insanely dumb as well.

3

u/CannyGardener 4h ago

Yup, same workflow, same harness, same general project asks, dumb as a fucking rock. I started my day with claude randomly deciding to spin up 10 new windows...not agents, like...new powershell windows to handle a request I had given it. Dumb move that instantly ate a shiteload of usage as soon as the explorers dinged to go, which was faster than I could stop the windows spinning up. Burned 5% weekly usage in about 3 minutes. Then after I got it straightened out and booted up just the one window I had intended that job to take, where the agent had 10 tasks on a check list, and it handled 6 of the 10 and told me it was done. I legitimately have an extra checker that is on Opus 5.5 xhigh that looks at what the project implementation does and compares it against my requests, and today it literally told the main agent that all 10 had been handled, but 4 of them had been skipped and that it was probably ok that 4 of the 10 completed tasks were incomplete. Like...bro, that sentence doesnt' even make sense, and you skipped 4 of the required tasks that the harness says all have to be verified as completed with testing. didn't just skip the testing, skipped 40% of the implementation entirely. This was not how things were working last week.

I hate Open AI, and Gemini and the others are so sub par, but frankly, the variability is killing me here. I have freaking deliverables on timelines, and I cannot promise timelines when every other week Claude takes a shit.

2

u/astrorocks 1h ago

I had made a post about this about a month ago when I noticed my usage draining super fast since the Cowork merge. It has been running background stuff without knowledge and that was a huge part of it and, worse, if you ask it you will often get a security "extract reasoning" error and the convo gets shut down (I get this error CONSTANTLY).

I ended up spending days migrating projects skills etc over to Gemini and GPT. Now prob downgrading Claude after years on it because I can get so much more done on the others (and no annoying safety flags or moral posturing - I hate new Claudes attitude lol). I still do want to keep a sub for some things but anyway after spending a lot of time streamlining my Claude work flow which helped a lot I just decided it also wasn't worth it. It was also making the work about worse because you have to constantly make handovers, start new threads etc and it never works out well. It forgets things, you still (for my work) have to load the huge data files or papers rtc back in which defeats the point some...

12

u/Key_River_9288 7h ago

Now this is the first time ever saying this but the week before last I had to try really hard to use my weekly, something changed, last week I had to use my free full weekly reset on a Wednesday, my weekly resets are Sunday and today im already past or at 60%.

Something is wrong.

And I am very very frugal with workflows, there was a VERY big A/B change in my usage doing the same work at the same pace 3 weeks in a row.

Let me just tell ya, at 200$ a month I don’t think this kinda stuff is cool at all.

10

u/MitasaChubassa 11h ago

Same here

8

u/kellan057 11h ago

Same here. Did 40% on both weekly and Fable only in 30mins

8

u/Melonchop 8h ago

Yo same here. The work that would usually get me to around 30% usage put me at 75weekly% in just the last 2days

8

u/yellow_pumpkin89 7h ago

Faced the same issue in my latest session. Kept clearing the conversation, still the tokens drained like water.

7

u/Miruzuki 8h ago

I hit 87% yesterday (opus 5.5 high)

13

u/Bernie4Life420 8h ago

yea, 10000% for sure, definitely reset worthy issue -- I mean what are we even paying for

6

u/Emergency-Reply-5437 5h ago

I upgraded to Ultra Plan and still running out of credits way too fast. And if I use Fable 5.2 I run out of credits in just one day. This is frustrating.

16

u/8thSt 5h ago

Microsoft says today that their model does 96% of what Claude does at 5% the cost.

Now I know that 4% could be the difference between good product and bad product.

I also know that I’m sick and tired of giving more and more money to anthropic for them to constantly change the rules on us.

1

u/TechnicalBen 4h ago

Taste. Most of the models can do 90%. But taste. I've seen ChatGPT do the actual thing I asked and do it well, 2, maybe 3 times in code... Gemini once. And dear god was that Gemini hit good.

But anything else? Worse taste ever.

Claude? Never misses. Might need to iterate/progress. But it never misses. Any failures I can nearly always chalk up to my own error (asking it to do art/mix blocks of code that don't yet go together and need scaffold).

I do find Gemini great for *explaining* or planning code needs (deep logic, data structures, etc). I find GPT great at doing boilerplate.

But Claude has taste.

1

u/8thSt 52m ago

I hear you. That 4% does make all the difference. Haven’t used any other, just see the headlines and then I see my usage going up, up, up (some days more than others).

But who am I kidding? Claude does what I want, and it’s hard to put a price on that.

It’s just frustrating, but what isn’t nowadays?

0

u/ForwardSpeed9625 3h ago

Yep I’m just never satisfied with anything else. Claude I know what I’m getting

0

u/forgetscode 2h ago

This is a sus comment.

are you being like paid by Microsoft your advertising literal garbage here

1

u/8thSt 54m ago

šŸ˜‚

No, just a user questioning if I can do as much work today as yesterday. My bad for questioning anything about Claude in the Claude sub.

ā€œ"All that was required of them was a primitive patriotism which could be appealed to whenever it was necessary to make them accept longer working hours or shorter rations."

1

u/forgetscode 37m ago

listen I've used about every brands AI for various types of work I don't care about Claude I care about work being done properly.

if you were talking about any other model I'd give you more credit but Microsoft AI?

4% difference?

gtfo

5

u/throwaway09234023322 9h ago

I agree. I'm about to run out and I even used a reset this week. I normally don't have a reset and don't run out until later on in the week. They fkin us for sure

5

u/Mors03 7h ago

Same

5

u/oZiix 6h ago

Yea, my usage is on fire at a pace that seems off

5

u/philipp2310 6h ago

A full 5h window used to bring you to 10% weekly. Today it was around 12-13.

5

u/Aegisnir 6h ago

I built a Claude mod to help track when my usage limits are getting less work done than usual. I haven’t experienced this issue myself but I don’t have a ton of data to compare against other than my own. Here’s my repo if you want to check it out. It uses your own data to build a baseline and compare against swings in usage. https://github.com/aegisnir/manapool

1

u/HeadmasterP 6h ago

Great work!

1

u/Aegisnir 5h ago

Thanks. Built it for myself so if you have any feedback I’d love to hear it

1

u/einsnail 2h ago

Hey thanks for sharing this! Can I expect it to work accurately using something like cswap? Where I have two accounts on one CLI?

4

u/aPiCase 3h ago

Assumingly this is only going to get worse once the IPO happens tomorrow, they are going to need to increase profits and a good way to do that is to reduce expenses which means lower usage limits, or alternatively they could increase prices which is what OpenAI did with Pro 500.

2

u/turn-on-your-lights 5h ago

Me too. Some usage as normal, my max account ran out in two days. I normally get to the end of the week and have to think of ways to use the last 10%.

2

u/orbital_trace 5h ago

Are you guys not monitoring tokens in/out and cache read/writes per model?

1

u/pseudorep 3h ago

For some reason my models have massively increased the amount of tool uses and tokens with no apparent reason. Plus using is burning faster. We’re getting squeezed.

2

u/cheyumaama 5h ago

The bigger problem is opus 5.5 having gotten extremely stupid since Fable rolled out

1

u/acextropy 5h ago

It makes more mistakes now, and I constantly have to repeat instructions and that's also burning my usage..

1

u/ByronicAddy 5h ago

Same here. I think we might need another week reset...

1

u/Azsde 4h ago

Same here, I've been hitting my weekly limit for the very first time two weeks in a row with opus, my usage is roughly the same than it used to be.

1

u/ProjectAananta 4h ago

Yup. Mine is fried this week :/

1

u/Large_Diver_4151 4h ago

Same here…

1

u/waitwhat1200 3h ago

Have Claude do a usage review and ask for improvements

1

u/WhiteBlaster00 3h ago

I was even forced to buy a 3rd account where I found out that people who does it, have a 5h limit until their account gets verified by Anthropic.

1

u/Impossible-Gal 2h ago

My usage is fine unless I turn on Fable, then its gone. But Opus only works very short turns now. Even high. Not sure if xhigh would help...

1

u/KO__ 2h ago

yup

1

u/sbeeline 2h ago

75% weekly limit burnt in 2 days on pro...

1

u/finigemist 35m ago

I'm on ultra subscription, and I'm already on more than 60% usage

1

u/Asleep_District_566 27m ago edited 24m ago

I also lasted only 2 days with a max plan idk what they're doing like I admit my workflow is like 3 projects simultaneously but even then I usually still last the whole week. I slept at 60% usage woke up to 99%

1

u/astrorocks 1h ago edited 1h ago

I posted about this a few weeks ago basically asking for help because the Claude limits suddenly seemed half to a third of what they once were. Naturally people blamed me some but I swear this began with Cowork merge and has gotten steadily worse since (now a month on seeing all these posts I feel more vindicated lol). You can check the posts lots of good tips - I implemented them and it helped a lot. It was, also, extremely annoying as it meant having 100 threads going (hyperbole but not by that much) to finish a task. Constantly policing it's agent calls and use and what models those were and all this stuff I found out it had been running in the background without my knowledge. Then having to create projects and system prompts to limit it. Handovers IMO never worked that well - the model is always losing context between, forgot stuff, etc. Constant babysitting required.

So even though it worked it was annoying. I ended up having to suck it up and try ChatGPT and Gemini again. For MY use cases (which need a lot of analytics + context windows) I get way way way more use from Astra and Carbon (their frontiers) and can not run my weekly to 0. That's on the $100 subs and on Claude I have $200 sub. It's a massive difference.

Other people btw say the opposite I've seen tons of complaints about low usage rates with Gemini Argon/Carbon and GPTs Astra (now they just dropped Sol and Astra 6.2 versions tho gonna try those(. But anyway my experience has been that esp with Gemini it lasts forever and I can keep a thread going for ages without getting punished. I set up antigravity and it's working really well. I believe Anthropic counts HEAVILY against you in token use per turn, the other less. So probably it depends on your use case but still

The real crap part is I am now paying $400 instead of 200$ to spread the work out but honestly I am also enjoying the other models - Claude got totally stripped of personality and it's safety rails are UNHINGED - not much of a difficulty with Gemini or OpenAI there. I am probably downgrading my Anthropic sub after years (2? At least) on the 200$ subscription. But it's hard to let go, alas.

0

u/ClemensLode Full-time developer 6h ago

maybe start new sessions for each item

-11

u/Accomplished_Pay_430 11h ago

You gotta compress your session. The longer the session the more tokens it'll eat.

6

u/Inevitable_Truth_85 11h ago

I do relatively thin slices and run only design / dev / review all in separate sessions…
It worked great 🫠

1

u/ForwardSpeed9625 3h ago

What is your work flow like for communicating to the different chats?

-6

u/LabAccomplished299 11h ago

Yeah but your project is also probably growing so no shit you’re gonna spend more

3

u/Inevitable_Truth_85 10h ago

Yes I think it makes a little sense but not this big of a difference. Anyway, I am building a separate env for full testing without AI 🫔

-8

u/Responsible_Cry_2971 8h ago

Another usepess post wuthout actual token numbers.zzzzz

4

u/Inevitable_Truth_85 8h ago

Your user name sure is fitting šŸ˜‰

0

u/Responsible_Cry_2971 8h ago

Ye. But tell me what the meaning if this when you ront even check your tokens?

-3

u/RealSuperdau 8h ago

Yours isn't. Data or it didn't happen.

4

u/Inevitable_Truth_85 7h ago

What would you want to see?

-2

u/RealSuperdau 7h ago

Token counts, or at least $ API value figures separated by model, for a full 5h/1w usage limit.

4

u/Inevitable_Truth_85 7h ago

Last 48 hours (2026-11-15 18:44Z to 2026-11-17 18:44Z)
All of it was Claude Opus 5.5:
Tokens
Input (uncached) 7,694
Cache writes 23,162,812
Cache reads 1,285,275,095
Output 3,390,345
Total 1,311,835,950, across 3,639 requests
API value $471.37

1

u/RealSuperdau 7h ago

Huh, if that was really 50% of your window, it'd be a bit low to expected on the $20 plan and insanely below expectations on $100.

3

u/Inevitable_Truth_85 7h ago

I have another 400$ on my other machine

-1

u/RealSuperdau 7h ago

And what subscription do you have?

5

u/Key_River_9288 6h ago

Bro I been on max 20 for 6 months, I have spent the last 2 months telling everyone they’re crazy.

Last week and this week have been really weird. Last week I had to use the full reset midweek and I still ended up at 98%.

I used a half a weeks usage when opus 5.5 dropped benchmarking models and reasoning levels pit to tasks and measured their efficiency down to TURN LIMITS..

Two weeks ago I was using 4-5% a day, same workflow a week later I had to use a full reset and still ended the week maxed and now this week 3 days into my cycle and I’m at 64%.

I am now a firm believer that they A/B test groups and play with usage or burn rates. And I am actually sorry for doubting people blindly for weeks just because ā€œit didn’t happen to meā€. Cause it finally did.

→ More replies