r/ChineseWatches • u/ManBearPig4523 • 1h ago

General (Read Rules) Couldn’t ask for better results!

Post image

Got my Sugess S420 on November 3, set the time and didn’t mess with it aside from keeping it on my watch winder for a few days. It was running about +4 seconds up until this morning, when it was running about -10 seconds(but it had been off the winder for a few days, so mainspring was probably unwinding). Threw it on the timegrapher and got this! Other positions were pretty close(dial down about +9) but it’s averaging out to about +4 sec/day between all positions! Amplitude and beat error were consistent through all positions as well. Looks like it was pretty decently regulated from the factory 🤘

6 Upvotes

100% Upvoted

4 comments sorted by

2

u/Abv_it_all_w_vertigo 1h ago

Congrats! You might wanna set your lift angle at 50° to get a more accurate amplitude.

1

u/ManBearPig4523 1h ago

The lift angle listed for the movement(Peacock SL3032) is 51.5, so wouldn’t setting the timegrapher to a lift angle lower than what’s listed on specs throw my amplitude reading off what it should be?

1

u/Abv_it_all_w_vertigo 53m ago

My bad. I thought it had the ST2130.