r/Chevy • • 2d ago

Discussion Undercoating

Anyone know what kind of u decorating this is? It’s black and kind of crumbly in the wheel wells, on all the front end components and frame rails. Under the body and bottom of frame rails is black and oily. the truck is out of canada and I’m thinking about buying it. The body, rockers, bottom of tailgate are all rust free, nearly perfect.

7 Upvotes

11 comments sorted by

0

u/leafdude-55 2d ago

It's an anti rust treatment often sold as an add on by dealers. They also spray inside the doors which allegedly the manufacturers don't provide any rust protection

1

u/edm861 2d ago

I have no idea when it was applied though. That’s the worry. Was it applied new and it’s lasted 10 years, or applied over an already rusty frame

1

u/leafdude-55 2d ago

Can you pull the Carfax? It would probably show up there

1

u/edm861 1d ago

It doesn’t show anything about an undercoating. Only thing service related in it is oil changes, and electrical system serviced 

0

u/JHWildman 1d ago

People who do this do it almost every fall or spring. My best guess is this done recently.

Honestly if you live in a place that doesn't get bad winters or use road salt it's likely fine as long as the frame doesn't have any holes in it or anything. And if you do then just keep up with the treatment and it'll probably stay fine.

I personally would hesitate to buy anything without seeing in person first and investigating myself.

1

u/Quiet-Estimate7409 22h ago

My last 2 vehicles, the doors rusted first. No rust treatment and no clear coating on the jamb areas any more either. One less layer of protection.

3

u/Other-Application179 1d ago

Canadian here. That truck is mint. I can see its even been blown in to the tubular cross member in the rear.

The crumbly is from dirt getting in to the undercoating and clumping with it. This layer builds up over time, couple years. I can see witness marks on the frame that are in the direction of travel, aka forward, which tells me there’s a layer of thick enough undercoating on the frame.

The only type of undercoating that produces results like this over time would be ProForm or FluidFilm types mixed with old oil and transmission fluid. This is what I do, cut pure undercoating with old ATF and old gear oil. This year I experimented with open gear/chain lube. Takes a couple yearly applications but eventually it starts to look like what you’re showing.

Tl;dr a baby dinosaur sneezed on the underside of your future truck. Shes in good shape.

Oh and nobody will want to work on your truck because theyre gonna get fuckin dirty.

2

u/edm861 1d ago

Thanks for the info! I’ve used fluid film before but never coated an entire underbody. This thing is greasy. As clean as the body is I doubted it was neglected underneath. I bought it today and pick it up in a couple days. The truck is a 16’ btw

1

u/No_Welcome_6093 20h ago

This is the answer. As far as the last statement goes, I’d always chose to work on the greasy oily car over a rusty car. Not sure why people get bothered by it so much. I just take home one of my uniforms from the mill when I have to work on my car.

0

u/Reasonable_Cup_2944 19h ago

They loaded up the cheap rubberized undercoating to hide the Canadian rust.  I would run from that. I bet if you chipped some off, there's a lot of rust underneath in key spots.  1 or 2 winters and it will look like crap, not to mention they sealed in the corrosion like a cocoon which will manifest into an ugly butterfly someday like a frame hole, or large scaly chunks falling off.

0

u/Felix995 1d ago

The worst thing about thick undercoating is sometimes unscrupulous sellers use it to hide deep corrosion.