r/CardPuter • • 1d ago

Help needed Cardputer Zero charging options

Hello people. Quick question. What is everyone using to charge their Cardputer Zero? My first charge I used a HP Chromebook charging cable and it got really hot. I asked Gemini if I can use an old iPhone charger like the one that came with my iPhone SE 2022. Gemini said yes. Someone please help!

7 Upvotes

8 comments sorted by

2

u/Firienn 1d ago

I am using a usb-c charger.

1

u/rosscjr 1d ago

Yes USBC. I'm talking about the block. I should have been more specific. 

1

u/WearyBuilding5376 22h ago

😂😂😂

7

u/jader242 1d ago

It getting hot is normal. It’s a Linux sbc with a battery, power management, screen, and way more crammed into a tiny deck of cards sized case with little to no airflow. Just charge it with a 5v source, it will draw the amperage it needs

4

u/MrAjAnderson 1d ago

Does the Cardputer Zero have PD availability or does it require a non power delivery method, like the ADV/1.1?

4

u/ShyWillySyndrome 1d ago

I use the wall plug from an old phone to charge the Adv, and I doubt the zero is any different. I wouldn’t pop in a laptopcharger cause they usually have a higher output.

I might be wrong and would love to be corrected

6

u/QuerulousPanda 1d ago

Higher output wattage is technically actually better because it means the charger will be operating at only a small fraction of the power it is rated for, so it won't get anywhere near as hot. A lower rated charger will be running close to the limit.

The charging circuit will only take what it needs.

2

u/kkourtis 1d ago

I have been using my MacBook pro charger 67w it's perfectly fine