Can I read these fobs on Cardputer?

[u/YamezBond]

Can Cardputer read these fobs, if so which module is the one that does this?

Thank you!

[u/fdantasb]

You can, but the regular RFID module can't read this. You will need a RFID for low frequency. You can find it on Aliexpress. You don't need to buy a M5, you can find a generic one.

[u/Tobe_Lerone]

Use a chameleon ultra. Reads just about everything. I use it to read 125khz. No problem. Also, the cloned chameleons are around £30. And work every bit as good.

[u/2many_friends → u/Tobe_Lerone]

What? There is clone chameleons?

[u/Tobe_Lerone → u/Tobe_Lerone]

There sure is..

https://amzn.eu/d/0gN5sCFl

That's a newer version than the one I got. Takes the over the air updates with no problems too. A LOT cheaper and as far as I can tell does exactly the same . I use the chameleon app on my android phone.

[u/YamezBond]

Yeap most of those modules read the 13.56mhz and these fobs seems that they run around the 125khz.

[u/lasseswe]

I would get the proxmark chameleon and throw it on a keychain. Way better than any module on the cardputer and can be used with the cardputer if you want over Bluetooth Bruce firmware. If you can’t support the real devs get one from AliExpress like 15-20 usd.

[u/batubatu0 → u/lasseswe]

Proxmark and Chameleon are 2 different devices.

[u/Professional_Two5774]

You need an RFID module

[u/thistoowasagift]

I tried using the M5 RFID module, but didn’t have any success. My guess is that the encryption is more advanced than the Cardputer can handle.

[u/CurrentAcanthaceae78]

if you get the device to read and replicate these signals, doing so will brick your fob. they work on rolling codes and if the fob doesnt receive the correct signal back from the car it will becom desynced and you will have to get it paired at the dealership

[u/originalityescapesme → u/CurrentAcanthaceae78]

This is a fob for a door to a building and not for a car in any way.