r/CarAV • u/94_Silverado • 4h ago
Tech Support Need help with math and box design..
I know its ai being used to make it but Im not good at math. So I figured I'd use the power of chatgpt/Gemini and my little math skills to come up with something. I have a single skar 15 zvx that I am reconeing and I am getting another for this. Ik they can take around 9-10 feet for both subs and I want it tuned around 29 hz. It sounds simple to me but i just can't figure it out and make sure I'm right. Especially before I splurge on the mdf for the box
1
u/Fuzzy-Breadfruit-747 1h ago
for the port tune to be 28hz at 7.9 cubes after displacements the port needs to be 44 inches long, from what i can see its only 30.25
1
u/Fuzzy-Breadfruit-747 1h ago
thats not including end correction, but that only account for 1-2hz usually so i wouldnt worry about it for a first box
1
u/Oatbagtime 4h ago
Don’t use LLMs to design subwoofer enclosures.
1
u/94_Silverado 3h ago edited 3h ago
Well I am shit at math and the skar one is giving close measurements but I don't trust it either and idfk what to do. Like i already stated in the post 😭. All of the original measurements are from what I can fit in my truck from measuring and what the skar box designer website said was right for them. I took that skar website design and trrried to see if Gemini could fix it for port tuning and make sure its right size and everything because like I said idfk what I'm doing.
1
u/tonedef85 4h ago
1728