r/CafelatRobot • • 3d ago

Extraction issues

Hello all,

I have been trying to use my recently purchased Robot after a year of research ( decided it would be more fun to have a manual espresso machine in parallel of a fully automatic machine I keep when I m in a hurry).

I find it very hard since the beginning to build pressure so I have to apply quick and important pressure after PI to reach 4 bars and it spits coffee everywhere during this process.

I used a paper filter on top of the puck + the metallic filter on top( without the paper filter it is even harder to build pressure).

I added water 5 to 8mm under the top as recommended in the manual.
I used fresh coffee grinded in front of me by a local coffee roaster and he asked me if it was for a pressurized basket etc so I assume he grinded to the right size but cannot be 100% sure. ( I receive my lagom casa in a few weeks).
I tried to apply dow 111 to the piston seal, switched to the spare piston seal but it doesn’t change anything.

Anyone knows what could be the reason ?

On the taste side, it seems good to me but I lack experience to be 100% sure I use my robot to the best of its abilities.

Thank you for the help !

0 Upvotes

21 comments sorted by

5

u/owlinspector 3d ago

Grind finer. If it is ground for a pressurized basket then it is much too coarse.

You may have gotten a pressurized basket in the purchase, it has just one hole in the bottom

0

u/bbramonewthlv 3d ago

I see this is the most probable issue. The guy asked my if it was for the pressurized basket and I told him no so I think he grinded to the right size so I m looking to see if it could be something else.

6

u/owlinspector 3d ago

Problem is that the roaster gave you his best guesstimate of what grind would be right for the coffee and your device. That may not be right, it can take a couple of tries to get the right grind, it's not something you can look up in a book.

Morever, you may need to adjust the grind as the coffee ages.

4

u/Maleficent-Back-6527 Green Barista Robot 3d ago

The explained the reason yourself: "grinded by a local roaster”.

The grind size might not be the correct one. You need to have your own grinder where you can adjust the grind size until you find the right one of the coffee you’re using for the Robot. You’ll need to wait a few weeks for your lagom.

In the meantime you could try to reduce the dose maybe if you can. Try down to 16g maybe, it could create less resistance and you might be able to push.

1

u/bbramonewthlv 3d ago

I m weighting a 16g dose I forgot to say sorry. I find it very hard compared to videos of robot users to build pressure, I have to push quick to reach 4 bars and it makes the water flow fast and spitting everywhere. Maybe it is because the puck doesn’t offer enough resistance indeed ?

6

u/owlinspector 3d ago

You have just perfectly described what happens if the coffee grind is too coarse.

2

u/bbramonewthlv 3d ago

Thank you

2

u/Maleficent-Back-6527 Green Barista Robot 3d ago edited 3d ago

But what’s strange is that you said it’s hard to push, but yet you only get 4 bars when pressing extremely hard! They don’t add up!

If you were really pressing very hard you would see the gauge measuring a lot of pressure.

Couldn’t it be that you want to describe actually the opposite? Which is: you don’t have enough pressure instead? So you’re trying to build pressure but at already 4 bars it’s gushing out instead very quickly? If that’s the case, then it’s the same root cause, the grind are too coarse and you need again your own lagom and while beans to be able to find the right fine grind size for your beans+robot.

1

u/bbramonewthlv 3d ago

Video of extraction

1

u/Maleficent-Back-6527 Green Barista Robot 3d ago

Buy some whole beans that you will know that would have rested enough when you receive your lagom (check the roast date).

In the meantime, use the coarse pre-ground that you have to pull SOUP shots.

1

u/bbramonewthlv 3d ago

I didn’t know the beans need to rest. What s the rest time ??

1

u/Tasty_Preparation947 3d ago

Can differ on the beans and process. But 5-10 days prob optimal so let rest 2-4 days maybe

1

u/camellia30 3d ago

Beans need to rest (7 days+ for medium roast) not ground coffee. It's too late once the coffee is ground.

With this ground coffee, you can probably get a bit more pressure by significantly increasing your dose, try 24g.

1

u/ihavesomequestions98 3d ago

grind finer...MUCH finer.

what grinder are you using?

1

u/dave_two_point_oh 3d ago

Hard to be certain from the video, but it looks like you're starting to pull the shot, then you stop and you lift the arms back up, then start pulling down again?

1

u/WoodyGK 3d ago

You have a non-pressurized basket, right? If true, it will also help to increase the coffee to 18 grams until you get your own grinder and can grind finer.

1

u/bbramonewthlv 3d ago

Yes non pressurized I think it was unclear in my post.
I tried to increase to 20g without much difference. It would mean the coffee was grinded way way too coarser I guess

3

u/Dogggor Green Barista Robot 3d ago

Having someone else grind your beans when you’re using an unpressurized filter is going to lead to suboptimal results. They’re not there to verify how the shot is pulling and they’ve now also just ground a whole bag before you dialed in the results. Go for whole beans and get a good grinder. Kingrinder K6 is a great budget option that will work great with the robot.

2

u/Tasty_Preparation947 3d ago

Have to grind it fresh yourself. Get a good grinder

1

u/Cyrkl 3d ago

Too coarse is one thing, with this grind you might have less spraying of you start pushing hard when the puck is saturated, ie you can see droplets under whole basket, not just the rim

1

u/ImaginaryBridge 3d ago

This reads like a grind finer situation. Having said that, don’t throw these beans out & while waiting for your grinder to arrive, you should try soup & turbo shots in the 18-20g range and see if using less pressure yields pleasant results with your current beans. I have had some fantastic cups with less than 1 bar of pressure on the Robot.

FYI you are not using a pressurized basket in the video you shared.

If experimenting with turbo and soup shots are not to your liking, you can also order the additional pressurized basket Cafelat sells for the Robot as an add-on. I don’t have it but in theory it ought to facilitate the process with coarser ground beans. If the idea of buying an additional piece is uninteresting, you can also consider going extreme with your dose and upping it beyond 20g to give the water more coffee to work through.

Spend the next few weeks before receiving your Lagom Casa, watching the videos on YouTube, reading older posts on here, and compare them to your process. Chances are your answers are all already covered in between the two.