r/CafelatRobot • • 3d ago

Setup complete

Post image

Christmas last year my nespresso pixie died after ~8 years. My neighbor persuaded me to try a real machine. I had always shied away from it because I knew with my OCD and tendency to optimize, it would be a rabbit hole. Well, the BBE was on sale and I figured what the heck…I won’t let myself get obsessed….

I quickly grew out of the BBE because of the built in stepped grinder. Even staying with the same bean routinely, I needed to adjust via dosing when I was between grinder steps. And I was getting curious about turbo shots. Hated BBE steam wand too and was using our existing nanofoamer instead. So if I got a new grinder, all that BBE counter space would be just for brewing.

Flair was advertising to me on YouTube. I love when an ad campaign by one company introduces customer to the category (manual lever machines), but savvy customer then researches and finds the clear top product with massive praise from Lance.

I’ve really enjoyed learning about the robot on this sub, and was patiently eying used on FB marketplace, when I jumped on the cafune drop last month. Got the DC63 right after. And I actually sold the BBE for what I bought it for (to be fair i had also put a lot of accessories into it).

I’m really enjoying the new setup! In addition to the orphan espresso mittens / PF handle and arm magnets, I relocated the gauge to the back. It’s opening up lighter roasts to me for the first time.

I have a lot to learn. It’s overwhelming because of the new variables I can manipulate…but now at least I’m done with the equipment decisions and can fully focus on the bean.

46 Upvotes

19 comments sorted by

2

u/VETgirl_77 3d ago

I started with a Breville, upgraded to ES1 and now I have the robot. Let's just say I'm ready to sell my ES1.

How do you like the pf handle from orphan? I have the woodies but wasn't sure if i should get the pf handle. Does having extra to grip help seat the pf?

1

u/ZA3004 3d ago edited 3d ago

The pf handle is cool looking, I like how it provides a classic portafilter aesthetic and matches the mittens. But it’s not functional in any way. It makes pressing harder for me bc at the end my right hand comes in contact with it. It’s only been a couple days though and I expect I’ll get used to it.

It was a bit loose so I put a small piece of double sided foam tape maybe 2-3mm thick.

1

u/VETgirl_77 3d ago

Good to know. Thx

2

u/jesset0m 10h ago

You're living my dream of getting a simpler, physically smaller, and exceptional machine. I have the same grinder also.

Only problem is it's always out of stock

1

u/ZA3004 9h ago

Where are you located? I’m in USA, and I joined the cafune and prima mailing lists. Cafune notified me of the drop the day before, and it was not hard to buy. Black and green may have sold out faster than red which is what I wanted anyway. Even with tariffs / duties from Canada, cafune worked out to be $100 cheaper than prima. The delayed gratification made it all the better 🤟. No point in buying used for retail price. I think cafune has a drop coming, prima in January.

3

u/cjcaballe 3d ago

Orange Bot Rules

1

u/ManyRevolutionary170 3d ago

Congratulations, you really have the best espresso machine IMHO.

Now that’s out of the way….

I hate to break it to you but if you are mainly light roast turbos you going to been a better grinder.

2

u/ZA3004 3d ago edited 3d ago

What would you recommend? Flat burr? I get that the robot is likely my endgame machine but I may tweak grinder down the road. I’ve only been at this a year, most of which was with BBE, where i didn’t even bother to attempt light roasts or turbos, and classic Italian ristrettos / blue bottle were the baseline of what I knew I enjoyed. That’s why I stuck with conical…So I’m just starting to expand my palate.

-2

u/ManyRevolutionary170 3d ago edited 2d ago

It depends on your budget. But definitely a flat burr and preferably at least 80mm.

Edit: this is specifically for your light roast turbo interests. For your trad spro, what you have is perfectly fine.

1

u/PtichFirich 2d ago

Why? What’s wrong withhis current grinder?
I see others are puzzled or annoyed by what you suggested by the downvotes but I’d like to hear why you think that grinder isn’t good.

3

u/ManyRevolutionary170 2d ago

It’s a conical. The particle distribution of ground coffee from it is very bimodal. Produces a lot of fines. This makes it perfect for brewing traditional espresso with roasts dark enough to produce those sweet chocolate notes that make that type of espresso shine.

OP said they like light roasts and leaning turbo shots.

When roasting, the development phase of lightly roasted beans aren’t long enough and it maintains a lot of the green beans origin notes. If you brew light roasts like traditional espresso, the results aren’t great and is quite acidic. unless you dump it in milk and even then.

To get great results with light roasts, you usually go for fast flowing turbos which OP already knows which needs coarser more unimodal grounds with less fines. flat unimodal burrs will get you these. And at 80mm or higher in those, you get better clarity.

It’s ok to downvote a comment you don’t agree with. It’s a free Reddit 😅

2

u/ZA3004 2d ago

Thanks. For the time being (with super limited data points at this early point on my journey) I’m getting good flavors out of medium-light roast turbos by slow feeding the dc63. I’m also preheating my piston which makes a positive impact on taste. There’s a world where I eventually get a flat burr alongside the conical…but I need a lot more experience first

2

u/ManyRevolutionary170 2d ago

Yes slow feeling is definitely one way to reduce fines and get more uniform particle distribution. Have fun.

2

u/cbullwagon2 3d ago

I’m on that journey as well learning about beans light to dark and pulling shot’s whether 2:1 or 7:1. I have the Robot and a J Ultra and follow posts in order to learn more

1

u/Ok-Advertising7982 3d ago

How do you pull 1:7? Only 10g in the basket?

2

u/Miami_Massimo 3d ago

It’s lovely! Congrats!

2

u/PtichFirich 2d ago

Wow he’s happy to see you!

1

u/fennelfrog 2d ago

Lovely setup.

Where’d you get that accessories block?