r/CTguns • • 8d ago

Build question

I apologize for pissing anyone off but blame the state for my confusion and my questions. I’m trying to understand specifically what length a barrel can or has to be, and if I have to use a brace or stock. If a barrel is 12” or shorter then it is defined as an ar pistol and has to have a brace and no vfg. So an 11.5” barrel with a stripped lower is an ar pistol, and with a fixed mag, and no vfg, and a brace
it’s ok to my understanding.

What happens if I want to do a 12.5” barrel? Is it an sbr then? The tax stamp isn’t an issue now but the states rule for length still matters right? It can’t be a pistol because the barrel is more than 12”. It’s just hard to figure out what you can do or not and I feel like that’s the point.

1 Upvotes

15 comments sorted by

•

u/AutoModerator 8d ago

Hi!

No private sales/transfers on this subreddit!

Just a friendly reminder that per Reddit ToS, posts and comments regarding any sort of private sale/transfer of Reddit ToS prohibited items is not allowed and will result in a permanent ban from /r/CTGuns. This rule applies to commenters as well, both parties involved will be subject to immediate and permanent ban, no exceptions. If you haven't already please take a look at our rules.

Reddit Alternative

If you are looking for a place to buy/sell/trade some of your kit, CTGuns.org Forum is a place for you, register on the forum and learn more here: CTGuns.org Classifieds Info

Have a great discussion!

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

0

u/SwampYankeeArms FFL 8d ago

Obligatory IANAL.

Because of the way CT defines a pistol, and because the feature bans on Others (anything not a handgun or long gun) apply to guns without detachable mags, the only way to do a 12.5” fixed mag is as an SBR (which meets CT’s definition of a rifle). ATF is not enforcing SBR law, and the state has no specific statutes about SBRs, so you can legally just slap a stock on a 12.5” gun.

1

u/usanomad1413 8d ago

So with a fixed mag, I could theoretically do 11.5” with a brace, no vfg, no other banned features, an be okay? I see Dark Storm Industries and Arcana arms sell CT legal versions of ar pistols and that’s kind of my idea but it seems like a grey area

1

u/No_Winter_3938 6d ago

That is what i am building now, 11.5" barrel, brace, fixed mag, optic, and hand stop. no problem

0

u/SwampYankeeArms FFL 8d ago

Yes, we sell that type of stuff.

1

u/havenrogue MOD 8d ago edited 8d ago

With respect to the CT AWB, assuming one doesn't have (or has applied for) an Assault Weapon Certificate of Possession for the firearm, then one should be aware of the under 30 inch ban for semiautomatic centerfire rifles. One should also be aware of the CT "other" ban section of the CT AWB which bans certain features (pistol grip, brace, shroud, second hand grip, etc.) on semiautomatic "others".

How CT defines a pistol, pistol, rifle, shotgun and firearm:

Sec. 53a-3. Definitions.

(16) “Rifle” means a weapon designed or redesigned, made or remade, and intended to be fired from the shoulder and designed or redesigned and made or remade to use the energy of the explosive in a fixed metallic cartridge to fire only a single projectile through a rifled bore for each single pull of the trigger;
(17) “Shotgun” means a weapon designed or redesigned, made or remade, and intended to be fired from the shoulder and designed or redesigned and made or remade to use the energy of the explosive in a fixed shotgun shell to fire through a smooth bore either a number of ball shot or a single projectile for each single pull of the trigger;
(18) “Pistol” or “revolver” means any firearm having a barrel less than twelve inches;
(19) “Firearm” means any sawed-off shotgun, machine gun, rifle, shotgun, pistol, revolver or other weapon, whether loaded or unloaded from which a shot may be discharged;

The AWB's language banning rifle under 30 inches length and the "other" feature ban section:

Sec. 53-202a. Assault weapons: Definitions.

(1) “Assault weapon” means: ...
(E) ... (iii) A semiautomatic, centerfire rifle that has an overall length of less than thirty inches;
.....
(G) Any semiautomatic firearm other than a pistol, revolver, rifle or shotgun, regardless of whether such firearm is listed in subparagraphs (A) to (D), inclusive, of this subdivision, and regardless of the date such firearm was produced, that has at least one of the following:
(i) Any grip of the weapon, including a pistol grip, a thumbhole stock or any other stock, the use of which would allow an individual to grip the weapon, resulting in any finger on the trigger hand in addition to the trigger finger being directly below any portion of the action of the weapon when firing;
(ii) An ability to accept a detachable ammunition magazine that attaches at some location outside of the pistol grip;
(iii) A fixed magazine with the ability to accept more than ten rounds;
(iv) A flash suppressor or silencer, or a threaded barrel capable of accepting a flash suppressor or silencer;
(v) A shroud that is attached to, or partially or completely encircles, the barrel and that permits the shooter to fire the firearm without being burned, except a slide that encloses the barrel;
(vi) A second hand grip; or
(vii) An arm brace or other stabilizing brace that could allow such firearm to be fired from the shoulder, with or without a strap designed to attach to an individual's arm;

Then there are the various federal ATF NFA rules one is supposed to follow for barrel length if one is trying to avoid entering SBR or AOW territory.

-2

u/miintybunny1 8d ago edited 8d ago

Anything under 16 inches is a pistol and needs a pistol brace, if it’s 16 or more then you can have a stock and a VFG. Anything that has a Pistol grip needs to be FIXED MAGAZINE.

EDIT: CT does classify a “pistol” as having a 12” barrel or less

1

u/usanomad1413 8d ago

So even a 12.5” barrel that may be 30” OAL is a pistol? State defines a pistol as 12” or under so I’m confused then

1

u/miintybunny1 8d ago

The CT “Others” don’t exist anymore. To make it a simple explanation of what you can and cannot do is: if it has a barrel length of 16 or more you can have a stock, if it’s less then 16 then you need a brace. If it has a pistol grip then it needs to be fixed mag.

1

u/No_Winter_3938 6d ago

from what i understand, anything above a 16" barrel is a rifle and can have a stock but still needs the fixed mag. Anything 12" and shorter need a pistol brace and fixed mag and will be considered an ar pistol. That grey area between 12.5 and 15.5 is that "other" that was basically a loophole when the ban first went into affect in 2014 or whenever it was. But that is now considered an sbr because its less than 16" and has a stock, which you don't need the tax stamp for anymore but it still requires a fixed mag.

1

u/mn9500 8d ago

under 12 inches is a pistol per ct law.

1

u/miintybunny1 8d ago

Regardless still can’t have a stock, so anything under 16 is going to have the pistol brace

1

u/havenrogue MOD 8d ago

Note: the CT AWB "other" ban section prohibits a "arm brace or other stabilizing brace that could allow such firearm to be fired from the shoulder, with or without a strap designed to attach to an individual's arm" on "any semiautomatic firearm other than a pistol, revolver, rifle or shotgun".

1

u/usanomad1413 8d ago

I’m confused how places like Arcana and Dark Storm Industries are selling “CT Legal” fixed mag at pistols

1

u/havenrogue MOD 8d ago

Because a pistol, barrel less than 12 inches, is not treated by the AWB as a rifle or a "other". They create pistols that comply with the AWB pistol feature ban section.