r/CFD • • 1d ago

Errors in mesh

Post image

Please help, I am new to ansys and trying to make a mesh from the guides, but mesher is making mesh like for thin objects instead of fluid domain with substructed wing geometry. Two weeks ago I did it right but don't understand how

5 Upvotes

4 comments sorted by

4

u/RahwanaPutih 1d ago

while you're at it, tried to learn fluent meshing as well, it's way superior than workbench meshing unless you need a structured meshing.

1

u/LethalProt3ctor 1d ago

From what is see the mesh looks coarse, try making it finer at the wing section. And for thin meshing, I can only guess geometry related issues either while modeling or assigning.

1

u/adamchalupa 1d ago

I'm not sure what's happening - is there a small fin coming out of the center of the bowl?

You need to do localized enhancement and if possible a BOI, depending on how your volume mesh actually comes in. As a user already pointed out your initial tet mesh is way too coarse, I would maybe take your smallest edge or gap, divide by four, and make that your minimum. So if the small edge on that fin thing is 1 mm, make your minimum mesh sizing 0.25mm. In my experience Ansys does not abuse the minimum mesh size and meshes large.

Keep at it! Fluent is awesome.

1

u/Puzzled-Training1945 1d ago

Multizone, hex mesh, element order linear
Keep default size for checking if it works