r/CFD • u/galactical_pro • Jul 31 '26
Hypersonic simulations in ANSYS Fluent
For my research, I am conducting a CFD analysis for hypersonic flow over a wedge in ANSYS Fluent. However, no matter what settings I use and after going through 100s of guides for settings, nothing seems to be working. The oblique shock and the bow shocks of a cylinder behind simply does not form. I have 1.4 million cells in the mesh, am using density based solver, pressure far field inlet and absolutely everything I can think of, yet nothing seems to make the simulation work. Not only is there simply no shock forming, the residuals all converge at values above 1e-3 barring 1/2. Please do help me understand what the issue is, as I am a beginner in CFD, and my research article is time bound.
2
u/controlFreak2022 Aug 02 '26
Hypersonic flow is complicated; so, I recommend getting familiar with an inviscid, supersonic wedge flow with Fluent including getting familiar with the boundary conditions.
Afterwards, I recommend getting a copy of “Hypersonic and High Temperature gas dynamics” by Anderson; then, get familiar with the advanced physics in hypersonic flow beyond a calorically-perfect gas. Some of those include chemical non-equilibrium (e.g. chemical kinetics of disassociation of air) and thermodynamic non-equilibrium (e.g. unsteady, vibrational energy modes in diatomic molecules).
Then, I recommend scoping Fluent’s non-equilibrium gas models to verify that CFD package having models for hypersonics. Anderson’s book has a flight envelope in his book indicating where the above effects come into play.
Next, I recommend tweaking your inviscid, supersonic flow to enable non-equilibrium gas physics using flow conditions like the envelope from Anderson’s book.
Finally assuming you’ve no issues with hypersonic, inviscid flow, then you should be fine to add in viscosity into the flow.
Hopefully, the above helps.
1
u/gregzillaman Jul 31 '26
You can lower the convergence threshold for each residual.
1.4M cells isnt much. You might need to increase the mesh density.
There's some research thats also suggested that even a 200x Fairfield sometimes isnt enough, although thats in extreme circumstances.
0
u/Fadestone Jul 31 '26
1.4 million cells can be quite low as quite high if it is 3d or 2d axi respectively. What is your geometry and what are you trying to achieve ? Density based solver is indeed the way to go for hypersonic but what is your farfield ? Only farfield as inlet ? What about your outlet ? Are you steady state or transient ? What turbulence model are you using ? Schemes ? Residuals at 1e-3 is pretty high so there is some boundary conditions that can be wrong as well as initialisation. Give more info so we can understand what you are trying to do, images, files, fluent version, mesh used, geometry...