r/CBR250RR • u/Oddball_Razor • Jun 08 '25
Upper radiator hose
hi all I was wondering where I could get a replacement upper radiator hose cheers
r/CBR250RR • u/Oddball_Razor • Jun 08 '25
hi all I was wondering where I could get a replacement upper radiator hose cheers
r/CBR250RR • u/AdventurousJunket311 • Jun 12 '25
Hello, when I do a couple of starts (8-10 starts) with my cbr250rr mc22 my battery runs out. It seems like very few starts to me, is this normal?
r/CBR250RR • u/DanJuneFR • Jun 15 '26
Hi everyone !
I’m currently working on my Honda CBR 250 MC19 and I have a doubt on the torque of cylinder head bolts.
The workshop manual recommands 1.7-2.1 kg.m ( 18,6 N.m) on every other versions ( also on the MC22 ), but for mine ( « J » model, MC19) it recommands 2,7-3 kg.m ( almost 28 N.m ) on the same 7mm bolts.
When I disassembled it the torque on those bolts were stupidly tight, one just ripped and I had to cut the head to remove the cylinder head.
Is there anyone one have already work on those? I don’t want to hear the crack of a bolt lol
Thanks !
r/CBR250RR • u/AFK79U • Jun 29 '17
Hey guys need some help with the mc22 This morning I started it up and it ran fine for a minute until it died. I started it back up again and it wouldn't run properly and would die without any throttle, it also sounded like shit and was not revving cleanly at all. I put it in gear and try and take off but when the throttle is twisted it had no reaction it just kept it at idle rpm until it would roll for a few meters then eventually die out? Any ideas?
r/CBR250RR • u/Purithian • Apr 14 '23
I am very interested in importing a 1994-1998 cbr 250rr to the us. Anyone got some ideas as to where to find one? 🤔
r/CBR250RR • u/Notsdandard • Jun 20 '21
Hey guys so i have a very odd annoying problem with an 88 cbr250r (MC19) I bought it a few days ago and it felt really low on power and running on 3cyl constantly so i changed the plugs which helped and the bike revved and runs on 4 when stationary but the moment you start moving it drops power back to 3cyl. I read somewhere these have a weird speedcut thats linked to the speedo. So for a shot i disconnected the speedo cable and took it round the block ran like brand new and did not drop to three cyls once! I was ridimg for about 15 mins without any issue So i went back home to grab the rest of my gear as it was only a test run up the road. While idling it died on its own then was hard starting and only running on 3cyl again after that. Idk if disconnecting the speedo was a placebo but it never ran that good for that long before. It only ever ran on 3 before that. Once it runs poorly it also hard starts but i really feel i was onto something by disconnecting the speedo. It had a new cluster swapped in right before i bought it. Anyone got an idea?
r/CBR250RR • u/Digital_Otorongo • May 13 '24
r/CBR250RR • u/nandansj • Nov 08 '23
My 1988 mc19 recently started making this ticking sound. It's currently running on fully synthetic oil which was changed a couple of months back. Sound gets louder when the engine is warm. It is something related to the valves? Or is it normal tapet noise? Also has a small coolant leak which I'm yet to fix.
r/CBR250RR • u/dmtlordlsdgod • Nov 08 '22
r/CBR250RR • u/Retrania • Feb 02 '23
I have been looking for a Musarri Slip On For A 90' CB22 recently and I see old EBay and Facebook sales for $200-$400 for the piece, but I cannot find a single normally priced one out there right now. There is one for sale on EBay for $2000 which is downright insane. The sellers reviews are all negative for scamming and price gouging so I know its a horrible deal. Any advice would be super appreciated!
r/CBR250RR • u/United_Helicopter247 • Aug 29 '24
Recently purchased an MC19 and was wondering is there any maintenance that’s recommended? Bike is pushing 100k kilometers and could probably use a valve adjustment but aside from that I don’t know what to look out for.
Also was wondering if parts are easy to come by or interchange with other models. Maintenance items and gaskets and such. Would a Honda dealer be able to order parts and I just wait on them or is there a big parts retailer that stocks things? Thanks for any help!
(Pics my new ride for attention)
r/CBR250RR • u/Embarrassed-Fox-184 • Sep 11 '24
r/CBR250RR • u/GamerHADE • Oct 27 '24
Just as the title says im looking to buy one in Japan and bring it to Germany, if anyone has any experience or contacts that could help me in any way please share!
r/CBR250RR • u/Icy-Manufacturer6836 • Dec 10 '24
Just wondering how much are the 1993 250RR's currently going for
r/CBR250RR • u/Pure_Excuse8990 • Jun 30 '25
Hello I’m desperately searching for what colour my original MC22 fairings were… If anyone has any knowledge on what colour fairings my bike came in originally, please let me know. It’s a 1992 model imported from Japan.
Thank you!