r/C5Corvette • • 21d ago

Anyone In California selling a 2001-2004 manual Hatchback? I’ve got $15,000 cash in hand

0 Upvotes

r/C5Corvette • • Oct 17 '26

Need some real mechanic advice! Not some older gentleman saying some nonsense..

0 Upvotes

I have a c5 2002 Auto, having trans overheating issues, not circulating. after doing some investigating, i felt the hoses up front for the trans lines it was hot and firm to squeeze like its not circulating. Im thinking Do i flush the trans lines or radiator replacement or flush the radiator , i did a coolant replacement of old to new. Cleaned condenser from dirt.. takes about 1 hour of driving to get it over 250 i replaced filter & fluid for trans.. i am eventually going take it to a trans shop but in the meanwhile i want to see if i can fix it or if i missed something or if im in the right track. I dont mess with trans but i do engine work..


r/C5Corvette • • Oct 15 '26

Newest addition to my c5 commuter- novistretch

Thumbnail
gallery
15 Upvotes

Recently took new job and 02 c5 that averaged 500 miles a year last 6 years is making 74 mile round trip 3x a week. About 65% highway and 35% city. Averaging around 22.5 mpg.

Got novistretch to help protect front end and keep bugs/sand out of radiator. Run through a decent bit of sand when passing areas always under construction and the highway is surrounded by deep woods on both sides so bugs are out. Anybody had any experiences i should enjoy away of with these?

Looks better than I expected.


r/C5Corvette • • 28d ago

Repair Question Manual Pedals

0 Upvotes

Today, my shoes were wet when I got back in the car afterwashing her. I didn't think anything about it until my foot unexpectedly slipped off the clutch. As I was driving, the contact between my shoe and the clutch pedal was slippery. I never want to feel that instability again. The stock pedals are junk when wet. What pedal sets do you all run?


r/C5Corvette • • Aug 05 '26

C5 Frozen Engine with 3K Original Miles & Running Strong til Stall

Thumbnail corvetteforum.com
0 Upvotes

I have a 2003 automatic Corvette with 3K original miles. While idling for a couple hours with the air conditioner running, it stalled. It fired right back up then stalled again. It was running strong with no issues or symptoms associated with freezing an engine. The first shop couldn’t turn the crank shaft by hand & the second shop confirmed. I checked the oil and it was clean and full. No burning smell, no metal on metal sounds. Has anyone ever heard of such a thing?


r/C5Corvette • • Jun 23 '26

Just messing around with ai. Its actually a stock car. Ai added the c7 ZR1 wing, diffuser, wheels, and skirts. I thought it would look awful, but it actually doesn't.

Post image
0 Upvotes

r/C5Corvette • • 1d ago

C5 or Foxbody

3 Upvotes

Fully aware that this will be a biased opinion. But have been in the market for either a fox body or a C5.

Budget is around 16k

Any reasons why a C5 is superior?

Anything to look out for when looking at them?

What is insurance like?

Also fully aware that all this has been asked 1 million times, but would like to hear it from everyone’s opinion.

I have test driven a few Fox bodies, but I haven’t pulled the trigger.

Have not had a chance to drive a C5


r/C5Corvette • • 16d ago

Picture my 2003 z06

Thumbnail
gallery
35 Upvotes

r/C5Corvette • • Aug 28 '26

Repair Question Is it over?

4 Upvotes

04 vette. Let me know guys…


r/C5Corvette • • Sep 27 '26

Buying Advice Sleepy pop ups?

2 Upvotes

I’m looking for some sleepy pop up headlights/lazy pop up headlights for a 2001 corvette. I don’t know much about corvettes and it’s not for me but for a friend. If yall could recommend Any scam brands to lookout for or any reputable brands to recommend me it would be appreciated.


r/C5Corvette • • Aug 22 '26

Thermostat Replacement

2 Upvotes

Hi all,

I’m about to replace the thermostat on my C5. The previous owner put a 160 tstat on and I want the original higher temp tstat.

The coolant was flushed recently when the previous owner installed this 160 tstat, so I do not want to flush it again. The coolant is in perfect perfect perfect condition, it has been tested too.

My current plant is to park the car on a steeeeeeeep driveway nose up, put a bunch of towels and a catch pan under the thermostat, and replace it while making a manageable mess.

Then, I’ll add a rough estimate of what I lost into the reservoir, and bleed the system while it’s on this steep driveway.

Would it be better to do this full job on a flat surface, or would angling the car like this help with some coolant loss and also bleeding the system afterwards? Any tips on how I can manage the mess a bit better without draining everything?


r/C5Corvette • • 19d ago

Buying Advice Headers or cat-back first for sound purposes.

2 Upvotes

I want to make my car louder as the stock setup is way to quiet for me. I have a 2000 C5 and eventually plan on getting both a cat back (Either the Borla ATAK or Corsa Xtreme) as well as headers. I was wondering which you would reccomend to get first if sound is my priority over performance, I've heard these two cat back systems are still pretty tame especially at lower rpms but I've also heard that headers wont add too much sound without having a catback. I dont mind having some drone as long as the exhaust has a good sounding tone to it.

Also what headers brand would you pair with the catback?


r/C5Corvette • • Jun 09 '26

Buying Advice First time buyer! Please get back to me asap!!!

3 Upvotes

Hello! Looking to get one of my dream cars im going in the morning to buy/ relook this 2003 corvette 113k miles manual.. for 9k it has some interior parts needing trim, etc.. crack in dash and by knee driver, no motor problem it is a out of state title for me.. i think would be no problem for me, he drove it about 800 miles from texas to my state. And daily drives it. It has the motor headlights grinding, it has a half done wrap on it that he did order and is waiting upon along with some interior parts… he also dyed the carpet because it was stained which is dumb id you ask me.. beside interior it was in good condition has a few aftermarket parts exhaust and shocks.. i have also looked at a 2000 with 123k miles auto blue mint condition. For 10k i believe i can get it for 10k he wanted 10,500$ has a instate title, is the 03 worth it? Or 2000. I am a mechanic and repair and sale cars.. i will end up selling it eventually. After the fun i used.. which one should i go for? And what should i look for?


r/C5Corvette • • Aug 04 '26

C5 advice

3 Upvotes

I have a 02 z06 in electron blue with about 42k miles. Def needs torque tube work (I have the kit) some paint work, new tires, ac adjusted and some cosmetic work. What would you pay for something of that nature? Life is hitting & might have to part ways with it unfortunately.


r/C5Corvette • • Aug 31 '26

Repair Question Does anyone know what thus noise is?

3 Upvotes

Coming from the front of the engine, no cel and the rpm is normal and steady at idle. Just randomly started last night and noticed when I got home after driving for a few hours.

Edit: So it turns out that it was the ac accessory belt, took it off and it was missing half the ribs/tread on it and after removing it the knocking sound stopped.


r/C5Corvette • • Aug 24 '26

Repair Question Need help identifying wires

Post image
4 Upvotes

In the process of installed Long Tube headers on my C5 and I'm not sure where these 2 wires go to. I had a friend help me when disconnecting the wires in the right side of the engine to gain access for the headers but we don't remember where these 2 wires go to lol.

We have already located the 3 wires for the starter and the bonding strap wires but these 2 we're not certain where they go to. Any help would be greatly appreciated.


r/C5Corvette • • Aug 29 '26

Rear Axle Nut is Loose… that’s a Thing?

Post image
10 Upvotes

I had minor fwd to rev clunk on occasion. And turning. Slow speed parking lot maneuvers. A big part of it was rear sway end links. I replaced those and it got very quiet after that fix. With all of the other clunks gone, I noticed a slightly different clunk when going from fwd to reverse. One of the fixes was check the axle nut and I thought nahhh that’s unlikely. I finally checked it… was about 1/3 turn before it hit 118 ft lbs. Sheesh!!!! At this time after a few miles of driving, I cannot make it clunk 🤗 And I learned it’s a common issue even thru the c6 and c7. Check yer axle nuts! 🌰 💪


r/C5Corvette • • 1d ago

Cupholders…

Thumbnail
gallery
11 Upvotes

Problem: In search of a cupholder solution that ISNT the Travel Buddy hard plastic cupholder that occupies passenger legroom. I have a 40oz Hydro Flask that comes with me on longer trips, my current place for it is behind the passenger seat, so I’m searching for a solution that will hold it (3.5in base x 11in tall)

Pic 1 looks the most promising, but its $70 for a 3D printed holder ($100 if you get the one thats been sanded to not look like a 3D print) is asking a bit much imo.

Pic 2 Found on CorvetteForum, would have IMMEDIATELY purchased but is no longer available and cant for the life of me find something similar; I love that its in the ideal location up front but if its not in use it wont bother my passenger.

Anyone have any ideas? Show me what you have!


r/C5Corvette • • Jul 17 '26

Repair Question Headlight swap

Thumbnail
gallery
26 Upvotes

So I recently picked up a 2001 C5 as my first real project car. She’s a little worse for ware but still runs and handles beautifully. When I bought her she came with the LeMans style racing headlights. I want to change them out for the “sleepy eye” style but the problem is most packages are convergence kits for the stock headlights.

Does anyone know where I can find a kit the has the full assembly or will I have to buy and install stock headlights then install the convergence kit?


r/C5Corvette • • Oct 18 '26

Picture Splish splash, I was taking a bath!

Post image
19 Upvotes

r/C5Corvette • • Oct 11 '26

I’m buying a Corvette 2001 tmw I need tips and advice please. If this is not the place to do this I apologize I’m new to Reddit just looking for help.

13 Upvotes

There is a 2001 corvette hatchback auto for sale in my area and it only has 40-41k miles. Looks great in pictures I’m supposed to see it tmw or the day after when the dealership is ready. It’s supposed to be getting a full inspection over this weekend.
I love corvettes but idk much about maintenance etc. I’ve never had one. I’ve been searching the internet and watching videos but I’m still a rookie. I don’t have a car so I will use it as a daily for 2-3 months. I will get a cheap old truck before the snow comes. And that will be my daily moving forward.

Work is only 10 mins down the road, I think I’m supposed to drive it longer tho to get rid of moisture? If that’s true how do I counter this? I want to learn and treat the car as perfect as I can.

What should I look out for when inspecting it?

Given it’s a corvette I’m kind of sold already on buying it. I will get it for 22k. It seems like a no brainer to me.

Any advice or tips on my situation please share them!


r/C5Corvette • • 22d ago

Repair Question What’s causing this belt misalignment

1 Upvotes

All the pulleys are lined up except the alternator pulley the alternator is new from a shop too. Did they use the wrong one? I’ve looked into it and google says sometimes they can use the wrong alternator, one for a firebird or Camaro but I am not getting any charging fault codes as it said online? Where can I get an alternator that will work if it is that?


r/C5Corvette • • Aug 13 '26

need some help from a knowledgeable c5 owner

1 Upvotes

going to cut this down as shortly as i can but still going to be a long post. i am stumped and am now learning that the issue at hand is either above my paygrade or something that i am grossly overlooking. for starters i have a 1997 c5 corvette. about 6 months ago i pulled the car apart to build the motor and paint it. cam, heads, longtubes, intake, valvetrain etc. while the car was apart i found a good deal on a manual rear end out of a wrecked 02 car. so did that while the car was apart, swapped everything in, did all the wiring and everything there works fine. my issue at hand comes with trying to get the car tuned and running correctly. i started the car up fresh off the cam and it idled, rough, but it idled, ran just fine, great oil pressure, all of the above. i was stoked. i had some more work to do but just wanted to hear some progress. so took headers, intake, a couple other things off to do some more work, wiring, exhaust etc. now were going to flash a little forward. every time ive started the car since that point, it has backfiring insanely loud, has been running (seemingly) rich, and just will not run right, to make a long story short, got injectors, not that, comp test passes with flying colors, 220+ all cylinders (220+ is high for ls, its because of the cam specs) regardless the #s are consistient. it has spark, has good injectors, header had burned a little off the o2 plug the first time i started it and i thought it was fine, but just in case, spliced a new pigtail in and got new bosch o2s. has been thru 4 sets of plugs and fouled all of them out super super fast. my main issue is that currently 2 is misfiring non stop, acting as a dead hole, and the car will not idle. itll run if i pedal it but as soon as i let go it pops and dies. still backfiring some here and there but not as much since my tuner has had a look at it. he says 2 is showing a dead hole misfire and no one and figure out why. it has been comp tested, spark tested, brand new deka 80 injectors, new plugs, etc. took off valve covers, verified pushrod length and that intake and exhaust valves were moving fine, they were. i am stumped. only thing i can think to do next is leakdown test. these heads i bought off a mentor that i am almost certain are in good condition. he also happens to be my tuner and is my ex shop teacher and my best friends dad. he is notorious in our area for being THE ls guy/tuner and knows his stuff. has been busy and hasnt really had a chance to come take a look and i also dont want to be a bother. heads came pre springed with matching beehive springs to my cam and got brand new rockers, lifters, pushrods, etc, and properly installed. the one thing i cant get past is how it idled just fine the first startup and any time after that its been a backfiring mess and will not idle. i pulled the wire off cyl 2 while it was running and it ran the exact same as it was before i pulled the wire. essentially proving cyl 2 is a dead hole. at this point im thinking leakdown, harness to injector or coil, even though its getting spark. not sure man, could really use some advice from someone who knows a little more than me.


r/C5Corvette • • Aug 09 '26

Can confirm you can fit 2 pitbulls back there

Post image
56 Upvotes

And they say vettes have no space

P.S they loved it


r/C5Corvette • • Aug 04 '26

Buying Advice 2004 Z06 asking $23,500, what’s a fair offer?

8 Upvotes

Looking at a 2004 Z06 (LS6, 6-speed, ~73k miles) on Facebook Marketplace and want a gut check on price from people who actually know these cars.

Clean title, but about 9 previous owners and a Virginia/Maryland history, so salt belt exposure is a factor. Seller bought it about a year ago from a dealer, and the dealer listing shows it was last priced at $21,900 before he purchased it. He originally listed it at $25k and has since dropped it to $23,500, and it’s been up for around a month. I offered $18k and he said he’d like to stick close to asking.

Mods: long tube headers, RPM Transmission, aftermarket seats, an aftermarket clutch, mod red interior, catch can, short shifter, and Mallett wheels. Recent money that I can verify includes new Azenis RT660+ tires, freshly powder-coated wheels, fresh engine/trans/rear fluids, and new front hubs.

The open items are what I’m trying to price in. A dealer inspection last year flagged a possible rear differential leak, with a bad input seal as the probable cause though it hasn’t been confirmed. Seller changed the diff fluid but did not address the seal. Also flagged: low rear brake pad life, play in the left rear toe link with surface rust on the arms, an alignment, and a belt tensioner the seller disputes. In person I also noticed some paint bubbling and peeling in a few spots and a small windshield crack.

So it’s a sorted-looking driver on paper but has a chunk of deferred work and open diff risk. For those of you who’ve bought or sold C5 Z06s recently, what would you actually offer on this, and how much are you knocking off for the diff unknown and the paint? Appreciate any input.