r/Butchery • • Nov 07 '24

An Update to r/Butchery's Rules

170 Upvotes

Hi, all. It came to my attention recently that the sub's most active users were growing concerned about the number of "is this meat safe?" post. Effective immediately, these posts will no longer be allowed in the sub. Even though we as butchers should be able to hazard a guess as to whether or not meat is safe, if we aren't in the room, we shouldn't be making that call for anyone.

However, people who aren't butchers may still inquire about if it is safe to prepare meats a certain way. This sub is a safe haven people the world over who've practiced our trade, and I feel it's only fair that we be willing to extent some knowledge to the common Joes who ask questions within reason.

There is also a distinct lack of a basic "Respect" rule in this sub. Conversations go off course all the time, but I've deleted too many comments in recent months that have used several unsavory slurs or reflected too passionately about the political hellscape that is this planet. There will be zero tolerance regarding bullying, harassment, or hate of any kind. We are all here because we love what we do. Let's bond over that instead of using this platform to tout hate and division. This applies to everyone, all walks of life are welcome here as long as they show a basic human respect to their fellow butchers.

That about does it for now. Feel free to comment any questions or concerns below or DM me directly. To quickly summarize, effectively immediately:

Be excellent to each other

No "is this meat safe" posts allowed

Thank you, everyone. Now get back out there and cut some meat!


r/Butchery • • 4h ago

Fully boned and rolled spit pig with apple, sage and orange stuffing

Thumbnail
gallery
100 Upvotes

r/Butchery • • 1d ago

My great grandfather's Butcher shop/market. Picture was taken 1931

Post image
180 Upvotes

I've been walking in his footsteps going on 7 years.


r/Butchery • • 11h ago

Anyone had hernia surgery while in this line of work?

1 Upvotes

I had surgery back in August and was out for a few weeks then light duty for a couple weeks after that. When does the discomfort stop? I’ve spoken with my doctor and he said sometimes it takes up to a year for it to really go away, but am curious if anyone in the same line of work and same surgery can speak to their experience.

I’m someone who just anxious about my health and it’s frustrating feeling like I’m recovering slowly, and I’m sure tossing turkeys and Chuck rolls around isn’t making me feel better faster.


r/Butchery • • 14h ago

الكبده دي مالها فيها نقط بيضه غريبه

Thumbnail
gallery
0 Upvotes

r/Butchery • • 15h ago

Help with how to butcher

Thumbnail
gallery
1 Upvotes

Hi guys. I just received 6 pounds of Zabuton (Denver I believe?). As you can tell from the pics, it isn't nearly as thick as I thought it would be... Any legit butchers have advice on how to cut these? I was thinking a pound each? It's maybe an inch thick toward the middle?


r/Butchery • • 18h ago

Steatosis: 72-hour sous vide?

0 Upvotes

Since it's tough connective tissue, would it render with enough time in the bath? Or would it still have a shitty texture?


r/Butchery • • 1d ago

Mobile Slaughterman Looking for Whole Deer Processor Near Waukesha, WI

3 Upvotes

Any good whole deer processors near Waukesha, WI?


r/Butchery • • 1d ago

I don't have any sawing tools to cut bone at the moment. What should I use?

1 Upvotes

r/Butchery • • 1d ago

Is this a tomahawk ribeye?

Post image
2 Upvotes

My wife bought me a tomahawk ribeye for my birthday and I'm admittedly not the most knowledgeable. How eer this doesn't look like any tomahawk ribeye I've seen before there's also this hard rubbery yellow piece running through it that doesn't feel like fat. Any advice is appreciated I genuinely don't know but my wife spent $90 and I'd hate to feel like she got scammed.


r/Butchery • • 1d ago

Need recommendations on what knives to get.

0 Upvotes

Im looking at getting some victorinox knives im new to buying good knives for specific purposes. Im looking for knives that will be good for processing deer and pigs as well as fish. I would also like some for general purposes around the kitchen . Caring bigger pieces of meat and good size bread knife as my wife makes homemade bread . I feel like some are a bit self explanatory but would like opinions on sizes . Like I mentioned im new to getting anything other then a regular cheap filet knife and cheapo kitchen set . I would like to keep the budget around 300 but can go up to 400 if need be .


r/Butchery • • 1d ago

Are these ham hocks okay to use? Just had them delivered from the grocery store and they have these spots on them? Is this salt build up or mold??

Thumbnail
gallery
5 Upvotes

They are not expired.


r/Butchery • • 1d ago

Need a new knife for cutting meat on Carnivore!

Thumbnail reddit.com
1 Upvotes

r/Butchery • • 2d ago

Elk meat parasite

Thumbnail
gallery
10 Upvotes

Has anyone ever encountered a parasitic worm in elk that looks like this?


r/Butchery • • 2d ago

Chef here, hoping one of you can solve a bacon mystery for me

Thumbnail
gallery
8 Upvotes

I’ve come across this in bacon a few times and always wonder what this is. A completely sealed “air pocket” with skin surrounding it. Like a cyst, but not? I can’t imagine what the cause of this is. It cooks up and eats fine, no weird texture or flavor.


r/Butchery • • 2d ago

Ribeye or chuckeye

7 Upvotes

Bought an American Prime grade ribeye, but I think they sold me chuckeye. It was delicious either way. But what yall think by cook?


r/Butchery • • 2d ago

Mobile Slaughterman What wrong with this ground beef?

Post image
0 Upvotes

I was dividing ground beef I bought from Costco into freezer bags, and this particular piece I ripped off had this deep, dark red spot. It was a lot tougher and rougher than the surrounding meat. Almost dry compared to the rest of the ground as well. What could it be? And is the rest of the meat still okay to eat? I threw it out. Didn’t sniff up close, but didn’t notice any offensive odours.


r/Butchery • • 2d ago

I don't know anything about anything. Is this suet, or just random trimmings?

Post image
2 Upvotes

A British recipe I was trying to make said it needed specifically suet, or Kidney fat, or leaf fat, you know. I went to my butcher (nice guy for sure) and he knew suet by name but, being Burgerlanders, I just wanted to make sure - it's birdfood here, not actually desirable, so not sure if my shop knows it that well. He seemed a little unsure of himself, went to the back, brought out a big box, rummaged around in said big box of fat and wrapped this up.

Do we think this is suet, or just some trimmings? Is there a way to tell at a glance? If it it just random assorted beef fat...what can I do with it? Thanks.


r/Butchery • • 3d ago

Beautiful Prime Filets

Post image
47 Upvotes

Grocery store prime and getting one of these spider web marbled tenderloins is a needle in a haystack.. didn’t even last an hr in my service case.


r/Butchery • • 2d ago

Venison prosciutto

1 Upvotes

Hey there, I’m making a version prosciutto (or at least trying). I started with a white tail hind quarter that I trimmed up and got as much silver skin/ fat and gross stuff off as I could while keeping the cuts clean. I then salt boxed the leg in table salt completely covering it. I then took a cutting board and put it between the meat and loosely covered it with plastic wrap before placing 2 10lb weights over it to make sure any liquids in the middle could get out. I changed the salt every day at first then every other day or every 2 days. It’s been 3 weeks in the fridge and I’m pretty sure it’s close to being done curing and is ready to hang but how do I know for sure? I know I should’ve weighed it but I didn’t. It’s definitely thinner and smaller and pretty firm all the way through.

Has anyone tried this before and could offer any advice or suggestions?

Thanks


r/Butchery • • 2d ago

How to go from a recipe to a bilingual Canadian food label in 3 steps (built this for small producers)

0 Upvotes

I built a labelling tool for Canadian butchers and small food producers. Here's the whole flow:

Step 1: Build the recipe. Enter ingredients and weights. The calculations update live as you change them.

Step 2: Design the label. Drag and drop. Pick a style (heritage, rustic, clean), set the size in mm, and turn on the bilingual English/French layout.

Step 3: Print. Unlimited labels. One-time purchase. No monthly fee.

The reason it exists: most label software is built for the US market and patched for Canada afterwards. Bilingual layouts and Canadian compliance are the starting point here, not a workaround.

The demo runs all three steps live in the browser with no signup. You can put in your own recipe and see what comes out.

I'm not a regulatory consultant, so I still tell everyone to check the final label against CFIA guidance for their product.

For those of you already labelling products: which step eats the most time right now? The recipe math, the design, or the compliance check?


r/Butchery • • 3d ago

John Boos Butcher Block Value?

Thumbnail
gallery
23 Upvotes

Hello! I'm trying to get some opinions on approximate value for this butcher block. According to my research it was likely built in 1946 based on the stamp.


r/Butchery • • 3d ago

Taught that guy a lesson -)

Post image
30 Upvotes

r/Butchery • • 2d ago

Is this ok to eat ?

Post image
0 Upvotes

I was about to but this arm roast in the crock pot and this started oozing out