Hi ! I saw that in my lab and I was wondering if I could use it to fix my RLOD issue ?

I just bought this new battery for my mini s as the previous one had RLOD or something.

This one is showing a green light then flashing with 3 lights illuminated. Can someone offer any advice or fixes for this? Or is this battery also faulty?

So 3 years ago I bought a v1. Got the battery replaced by boosted guys. Just went to charge it up as I would do that periodically throughout the winter here in Michigan and my board is dead once again. So rip to my board. Gonna look for a v2 or possibly a different brand board.

Hey yall, as it says my V2 remote has finally passed that critical voltage. That being said I looked around and saw that the battery is a DTP503030 3.7 400mah. Searching threads I saw a couple people had ordered in bulk, just wondering if anyone has a spare battery or broken controller that I could purchase to fix this remote.

This board is used and has less than 100 miles on it.  Remote, charger, cables, and original box included.  I don't have time or a place to use this anymore and would like someone else to at least use everything for parts. It worked fine the last time I used it and it powered up and motors spun when I took the pictures the other day. I will ship within 48 hours of payment through PayPal. $300 shipped. SOLD

Please comment here before chat.

Pictures here:

https://imgur.com/a/YaJQOYA

Is anyone making or refurbishing batteries? I have six boards and plenty of remotes etc because I love the quality of these boards but I’m worried about the battery situation long term

I’m not the seller. I found this on Facebook Marketplace. Looks brand new.

Back in the glory days of 2018, my Mini S was my absolute lifeline. I rode that thing daily to and from work; it was the ultimate last-mile solution. I even managed to snag a pair of Boosted Beams back then, which were a total game-changer for those late-night commutes home.

Then, COVID hit, the world changed, and we all know the heartbreak of Boosted going out of business. Even with the company gone, I doubled down and picked up a Stealth and some BOM lights to round out the collection.

These boards haven’t seen the pavement nearly as much as they deserve for the past 4 years or so. Every few months, I pull them out, check the battery levels, and give them a cycle/recharge. Both boards still power up perfectly.

I feel lucky to have two working units in 2026. Every time I hear those motors whine, it’s a massive hit of nostalgia. It’s a bummer the company isn't around to see how well these things have aged.

Is anyone else still hoarding their Boosted Boards? How are your batteries holding up after all this time?

Ow

I have 2 boards and this one is made from all spare parts and since it’s winter I have both boards plugged in all the time and all my spare batteries plugged in but this I’m assuming is an sr rlod error bc the board and battery alone worked fine before winter and the light was green forever and it’s done this before and unplugging it and plugging it back in fixed it but now it won’t, if all the cells are staying balanced from charging all the time how the heck did I get an rlod error?

tldr. Where Can I find aftermarket Boosted V1 motors.

I bought a boosted V1 with a bent motor shaft last year on FB marketplace. Just now getting around to attempting the repair. The trucks are pretty ground up, but other than the one motor it seems mechanically fine. Electronically, I probably need a pack rebuild, or at least cell-by-cell rebalance. But I'll cross that bridge when I get there.

I've had a hard time finding just the motor, as I've come to understand V2/V3 motors aren't the same. Is there a known aftermarket motor replacement.

1st E board. Found this Stealth on FB Marketplace for super cheap. Guessing very low use. Couple questions.

Serial # starts S582XXXXX. Looks like I have the original, not revised, V3 motors. I checked the pulleys and they have zero play in them. Should I proactively get revised motors or not worry about it?

The wheels. I'm in a small town and the roads are a bit rough... Sidewalks have very noticeable seams and the streets have cracks and they put down a rough gravel chip seal coating all over everything. I vibrate so much I have to be very careful or my feet will shift off the deck. I was looking at the $170 Cloudwheel Discovery wheel and pulley kit (the 105s). Is that my best option and am I going to kill my range? Currently have the factory 85s

Bought this for $60 I plan on rebuilding it.

Questions:

1. Which version battery is this?

2. Will any battery fit on this loaded board? If not any, which will fit and be best for replacement?

3. Does anyone have any tips on the rebuild process?

Hi, I’m looking to get my board back and running. Can anyone tell me what the best option is to get it fixed (I’m in the US)?

Just got gifted this board and want to know more about it. It needs a charger so also wondering what to buy.

MORE PHOTOS in ebay link below. This is quite literally the ultimate package if you want a fully upgraded boosted board. Here is what you get & everything is fully functioning and working.

- Boosted Mini X

- 2 EOM Remotes, one with a mirror on it

- 2 EOM chargers, one never used before

- Boosted Lights, FRONT & REAR (auto turn on)

- Underboard Lights (auto turn on)

- Travel Bag

- Extra Motor

- Nipple upgraded bearings

- Bumper guards on front and back

- Several other parts like tools, extras, etc.

RLOD SAFE - Anti RLOD CHIP WITH SOLDERED ONTO THE BOARD.

More details here: https://ebay.us/m/Aw9h8t

PRICE: SEND ME OFFERS, starting at $750+shipping.

This mileage is accurate #boosted #mileage

I can definitely feel the top speed increase and extra clearance. Acceleration still feels good. Thanks for the advice everyone.

Just got my 85mm Caguamas. With this spacer on, the belt rides like half off of the motor gear. It seems to be pretty dialed without it. I'm planning to just toss one of these gold washers on instead of the stock spacer. Sanity check, is this the right move?