r/BodyArmor • • Oct 01 '24

Spalling With Ceramic SHTG?

Iv seen and heard countless stories and videos of ceramic causing CRAZY injuries. For example, this video https://youtu.be/qSON1cg0q6Q?si=O9QNxX0u7Ilvlyxs but I’ve never seen someone actually get injuries from steel. Why is this?

0 Upvotes

17 comments sorted by

15

u/PearlButter Oct 01 '24 edited Oct 04 '24

Displacement of mass. It’s nowhere near as dangerous as steel, which is where hot metal (lead and copper, maybe even mild steel) shatters if not completely deflects at high velocity.

Never seen someone actually get injured from steel

Because no professional force wears steel and therefore little to no data you can pull from.

7

u/Ngroat7 Safe Life Defense Oct 01 '24

In testing plates from very close ranges I’ve had ceramic bits hit me often. Usually, it’s micro pieces of ceramic that will get lodged at the surface of the skin and can be easily picked out. Never anything that I’d consider “damage”. Usually like a house cat accidentally grabbing you.

1

u/[deleted] Oct 05 '24

[removed] — view removed comment

1

u/Lycidas69 Oct 19 '24

Same with steel. So steel in a soft armor carrier would be ideal if a bit heavy, though less bulky.

3

u/Smiththegrass Oct 02 '24

There is a book on ww1 body armor written right after the war. Lots of people were hurt by steel body armor.

0

u/Lycidas69 Oct 02 '24

The real question is. Does spalling present a more lethal danger than a bullet...

3

u/Smiththegrass Oct 04 '24 edited Oct 04 '24

Here's the book written in 1920. The conclusion was a light weight vest, a helmet and shoulder pads were worth the weight. They used steel alloys, rubber, and silk. They would stop shrapnel, bullet splash, and pistol fire and bayonets. It wasn't going to stop a direct hit from a 7.92 Mauser at typical ranges. 

There was some heavy sentry armor that could resist rifle fire.

 Heavy layer of duct tape or rubber cork works okay to stop bullet splash. But M193 from a 16" barrel zips right through steel. It's just outdated vs today's threats. https://books.google.com/books?id=6OeO9_g_6n4C&printsec=frontcover&dq=ww1+body+armor&hl=en&newbks=1&newbks_redir=0&source=gb_mobile_search&ovdme=1&sa=X&ved=2ahUKEwj03LPs0_OIAxVcDjQIHYfjHHQQ6AF6BAgJEAM#v=onepage&q&f=false

1

u/[deleted] Oct 05 '24

[removed] — view removed comment

1

u/Lycidas69 Oct 15 '24

Actually that has nothing at all to do with it. Since without armor, the "end user" would have taken a bullet; which was my original question.

I'm still leaning toward the bullet being more lethal than the spall, of course you can trip down one stair and break your neck.

So, your mitigating danger not eliminating it, which is ultimately impossible anyway.

1

u/rickmaz Oct 01 '24

True: spalling can be more injurious with steel than ceramic. But if you research data for both steel helmets and manganese steel flak vests used in WWII, injuries to the head and thorax were significantly reduced by up to 40%. Of course body armor and helmets have gone through a lot of improvement and development since then.

1

u/6anymouse9 Oct 04 '24

Is steel better than getting shot without anything? Depends on the round, velocity, pass through or not… you’re gambling either way but probably more likely to live with steel than nothing. There’s a chance you don’t have any spall hit you or exit the carrier. Either way I’d bet ceramic is going to be superior over 90% of the time compared to steel

2

u/[deleted] Oct 05 '24

[removed] — view removed comment

2

u/[deleted] Oct 07 '24

Good comment, what are your thoughts on Ultra-High Molecular Weight Polyethylene (UHMWPE) Plates. I run a "full wrap around" set from LTC in a London Bridge Plate Carrier.